Miller Diversion 165 TIG Welder Package (907626)
The Miller Diversion 165 TIG Welder Package is Miller's most affordable and easy-to-use AC/DC TIG machine that was designed specifically for the personal user.
Easy-to-Understand Operator Interface
It's as easy as "1, 2, 3" to set your machine and start welding! 1. Power-up. 2. Select material type. 3. Set material thickness range.
Portable
Whether it's in the shop, garage or at the race track, at 50 lbs it can be taken anywhere.
Reduce Noise, Maintenance and Operating Costs.
Our Fan-On-Demand cooling system only operates when needed. This cuts down on fan noise and reduces power consumption and contaminants drawn into the machine.
Fully Adjustable Amperage Setting
The full amperage range is available from 10-165 amps on both DC and AC output.
Utilizes Latest Inverter Technology
By utilizing an inverter-based AC/DC power source, a more efficient (less energy is used) and consistent welding arc are provided compared to older transformer based TIG machines.
Dependable Arc Starts
Provides HF, non-contact arc starting to eliminate tungsten and material contamination time after time.
Eliminate Waste of Expensive Shielding Gas
Our Auto-Postflow feature optimizes postflow time based on welding amperage. This allows for proper shielding of both the weld end zone and electrode every time without waste of gas or need for adjustment.
Better Control of Amperage When Welding Out-of Position
The package comes standard with the Weldcraft WP17 TIG Torch.
Comes complete with:
•Diversion 165 power source
• 6 ft (1.8 m) primary cord (50 A, 230 V plug)
• RFCS-RJ45 Remote Foot Control (Miller part number 300432)
• 12 ft (3.7 m) work lead with clamp
• Smith Argon regulator/flow guage with hose
12.5 ft (3.8 m) Weldcraft WP17 TIG torch with:
• Back cap
• Ceramic gas cup
• 3/32 in (2.4 mm) collet and collet body
• 2% ceriated tungsten
Easy-to-Understand Operator Interface
It's as easy as "1, 2, 3" to set your machine and start welding! 1. Power-up. 2. Select material type. 3. Set material thickness range.
Portable
Whether it's in the shop, garage or at the race track, at 50 lbs it can be taken anywhere.
Reduce Noise, Maintenance and Operating Costs.
Our Fan-On-Demand cooling system only operates when needed. This cuts down on fan noise and reduces power consumption and contaminants drawn into the machine.
Fully Adjustable Amperage Setting
The full amperage range is available from 10-165 amps on both DC and AC output.
Utilizes Latest Inverter Technology
By utilizing an inverter-based AC/DC power source, a more efficient (less energy is used) and consistent welding arc are provided compared to older transformer based TIG machines.
Dependable Arc Starts
Provides HF, non-contact arc starting to eliminate tungsten and material contamination time after time.
Eliminate Waste of Expensive Shielding Gas
Our Auto-Postflow feature optimizes postflow time based on welding amperage. This allows for proper shielding of both the weld end zone and electrode every time without waste of gas or need for adjustment.
Better Control of Amperage When Welding Out-of Position
The package comes standard with the Weldcraft WP17 TIG Torch.
Comes complete with:
•Diversion 165 power source
• 6 ft (1.8 m) primary cord (50 A, 230 V plug)
• RFCS-RJ45 Remote Foot Control (Miller part number 300432)
• 12 ft (3.7 m) work lead with clamp
• Smith Argon regulator/flow guage with hose
12.5 ft (3.8 m) Weldcraft WP17 TIG torch with:
• Back cap
• Ceramic gas cup
• 3/32 in (2.4 mm) collet and collet body
• 2% ceriated tungsten
| MPN: | MIL907626 |
|---|---|
| UPC: | 715959600965 |
MPN: MIL907626
UPC: 715959600965
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...
TIG
The Ultimate Review of the Square Wave TIG 200
Flagships: Some people think they’re just cursed. The Titanic was the flagship meant to change how we traveled the seas. The Hindenberg was a flagship meant to change how we traveled the skies.
So ...
Projects
Sparking Inspiration: Spring Welding Projects To Brighten Your Space
As the flowers bloom and the weather warms up, it's the perfect time to get creative with your welding projects. Whether you're a seasoned welder or just starting out, there are plenty of exciting ...