Brand New Millermaxstar 150STH TIG Welding Package W/High Freq. And Pulser(907136017)
Dc Only Stick Welder (cannot TIG weld aluninum with this welder) .
All you need to TIG and stick weld,
just add a cylinder for gas and electrode for stick.
Add Options For, many of which are listed in other listings..
. Comes with full 3 year factory warranty.
Click Here FORfull spec sheetshttp://www.millerwelds.com/pdf/spec_sheets/DC27-2.pdf
Maxstar 150 Sth
Best of Class - provides maxium portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine.
Maxstar 150 Sth Stick/TIG package with X-case and remote shown (907136-017).
| || |
| || |
| || |
| | | |
Automatically "links" the machine to115v-230v input voltages without mannually linking. Also compensates for voltage spikes and drops within the entire range. Delivering consistent output - All done without removing the covers to relink.
Wind Tunnel Technology(Tm)
Internal air flow that protects electrical components and Pc boards from dirt, dust, debris... greatly improving reliability.
Lvc(Tm) Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power+ -10%.
Internal power source cooling system that only works when needed, keeping internal components cleaner.
Adaptive Hot Start(Tm) for Stick
Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
Low Ocv Stick
A built-in circuit that reduces the open-circuit voltage (Ocv) to 13 volts when the welding power source is not in use, therefore eliminating the need for add-on voltage reducers.
Simply touch the tungsten to the work piece ..lift ...and the arc is initiated instantly and automatically.
Portable in the shop or at the job site - at 13.7 lb the shoulder strap allows the operator to easily move from location to location.
Auto-Line(Tm) circuitry automatically connects to 115 - 230 Vac, single-phase power without removing the cover to relink the power source.
Low Ocv Stick returns Ocv to 13 volts when machine is not in use.
Adaptive Hot Start for stick arc starts prevents electrode sticking.
Single Amperage Range allows operator to accurately set amperage on both 115 V or 230 V primary power.
Lift-Arc(Tm) start provides TIG arc starting without the use of high frequency.
Built-in gas solenoid eliminates the need for bulky torch with a gas valve.
Thermal overload protection with indicator lights helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.
Hf (High Frequency) start for non-contact TIG arc starts (Sth model only).
Built-in pulsing -select from four fixed-pulse frequencies (Sth model only).
| || ||List Price$ 2280.00 (Us $) |
- TIG (Gtaw)
- Pulsed TIG (Gtaw-P)
- Stick (Smaw)
|Light Industrial Applications |
- Dairy Industry
- Food/Beverage Industry
- Restaurant/Kitchen Repair
- Experimental Aircraft
- Petro/Chem Fabrication
- Shipboard Installation/Repair
- Maintenance and Repair
- 70 A at 22.8 Vdc(Stick), 115 Vac
- 100 A at 14.0 Vdc(TIG), 115 Vac
- 100A at 24.0 Vdc(Stick), 230 Vac
- 100A at 14.0 Vdc(TIG), 230 Vac
- 100% Duty Cycle
Output Power Range
- 5 - 150 A (TIG), 115 Vac
- 20 - 100 A (Stick), 115 Vac
- 5 - 150 A (TIG), 230 Vac
- 20 - 150 A (Stick), 230 Vac
- 13.7 lb (6.2 kg) Welder only)
- Stick Pkgs Come Complete With:
- Power Source with cord
- 13 ft (4m) Stick electrode holder
- 10 ft (3 m) work clamp
- Shoulder strap
- Stick/TIG Pkgs Include Above Plus:
- DB1712RDI25 TIG torch with adapter
- Protective X-Case
- Gas Hose and Regulator
- Rccs-6M hand AmP Control
- Mvp 120V And 230V Adaptor Plug