Hobart Champion Elite 225 Welder/Generator (500580)
Designed to be a job site workhorse, the Hobart Champion Elite 225 DC Welder/10,000 Watt AC Generator - combines a 10,000 watt generator with a DC welder for general construction and emergency power applications. The Elite 225 features a rugged, fully enclosed case which provides a protective barrier and lowers noise. All receptacles on the ELITE feature push-button reset circuit breakers. Auxiliary power while welding gives you the capability to run other equipment (lights, grinders) at the same time you are welding. With the quick set current control, it is easy to set up, provides smooth arc starts and maintains optimum arc characteristics. Cables sold separately.
Highlights:
• DC weld output for smooth arc performance and easy starts
• Four 120 volt GFCI (20 amp), one 240V (50 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers
• Auxiliary power while welding gives you the capability to run other equipment (lights, grinder) at the same time you are welding
• Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections and wiring
• 11-Gallon fuel tank with low oil pressure shutdown
• Just over 3 ft long and weighs less than competitive units
• "No tools" oil change and standard hour meter to help maintain routine scheduled oil servicing
• Quick set current control for easy set up and start welding.
• Auto-idle for greater fuel savings and reduced noise.
Comes Complete With:
• Vanguard 23 HP gasoline engine, 3600 RPM
• Fuel-efficient, low-maintenance, twin-cylinder, 4-cycle, overhead-valve
• 11 gallon fuel tank for extended run time
• 5/3/1 Industrial Warranty. Five year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); one year on guns (MIG and plasma torches)
Highlights:
• DC weld output for smooth arc performance and easy starts
• Four 120 volt GFCI (20 amp), one 240V (50 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers
• Auxiliary power while welding gives you the capability to run other equipment (lights, grinder) at the same time you are welding
• Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections and wiring
• 11-Gallon fuel tank with low oil pressure shutdown
• Just over 3 ft long and weighs less than competitive units
• "No tools" oil change and standard hour meter to help maintain routine scheduled oil servicing
• Quick set current control for easy set up and start welding.
• Auto-idle for greater fuel savings and reduced noise.
Comes Complete With:
• Vanguard 23 HP gasoline engine, 3600 RPM
• Fuel-efficient, low-maintenance, twin-cylinder, 4-cycle, overhead-valve
• 11 gallon fuel tank for extended run time
• 5/3/1 Industrial Warranty. Five year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); one year on guns (MIG and plasma torches)
| MPN: | HOB500580 |
|---|---|
| UPC: | 715959703048 |
MPN: HOB500580
UPC: 715959703048
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...
TIG
The Ultimate Review of the Square Wave TIG 200
Flagships: Some people think they’re just cursed. The Titanic was the flagship meant to change how we traveled the seas. The Hindenberg was a flagship meant to change how we traveled the skies.
So ...
Projects
Sparking Inspiration: Spring Welding Projects To Brighten Your Space
As the flowers bloom and the weather warms up, it's the perfect time to get creative with your welding projects. Whether you're a seasoned welder or just starting out, there are plenty of exciting ...