Motor Guard Plasma Air Filter for Miller, Thermal, and Lincoln

FREE SHIPPING TO ANY OF 48 CONTINENTAL STATES. 

ALASKA AND HAWAII BUYERS PLEASE SEND EMAIL WITH COMPLETE ADDRESS BEFORE BUYING, SO WE CAN QUOTE THE ADDITIONAL SHIPPING.

WE DO NOT SHIP INTERNATIONALLY

If your air isn't spray paint quality, then your eating up your tips and electrodes with dirty or wet air. This filter sold with case of 4 replacement elements should save you it's cost in no time.  SAME FILTER AND REPLACEMENT ELEMENTS SOLD BY MILLER FOR $230.00.

MOTM-26 AND MOTM-723

We accept Paypal, ALL major credit cards, cashiers checks and money orders. 

You can call me at 866-854-7380 from 8AM to 9PM EST, 7 days a week with questions.  

Plasma Cutting Systems: Compressed Air Filter
M-26
	A Sub-Micronic Compressed Air Filter that effectively removes oil aerosols and condensed moisture...and will: Eliminate Arc "Sputter" Restore the Plasma System to Maximum Cutting Efficiency Reduce Corrosive wear of the Electrode and Tip The installation of a Motor Guard Filter on the Plasma Cutting system downstream of the air regulator will effectively remove the contamination from the compressed air line. This eliminates the "sputter" from the arc, restoring the plasma system to maximum cutting efficiency, and dramatically reducing the corrosive wear on the tip and electrode. Designed to remove the smallest contaminant, oil-aerosol or drop of moisture to supply Clean, Dry, Oil-Free air to the point of use. Users of the filters report contaminant free air with higher flow rates and minimal pressure drops.

Compressed Air Filter - Plasma Cutting Systems
Model No.	Pipe Size	Max Flow @ 80psi	Maximum Pressure	Maximum Temperature	Removal Rating (NOM.)	Size	Replacement Element
M-26	1/4 NPT	2700 SCFH	125 psi	175 F	.01 Micron	5" x 7"	M-723
							M-723