Every component in a Miller industrial engine drive is engineered and built to assure ultimate reliability in the most punishing conditions. What makes Miller Industrial Engine Drives so Tough?
• Engine hours
• Hours left before an oil change is due
• Fuel gauge & low fuel shutdown indicator
• High coolant temperature and low oil pressure shutdown indicators
Deutz turbocharged four-cylinder diesel engine provides ample power at high altitudes.
Ingersoll-Rand ultra-reliable industrial rotary screw air compressor. Belt-driven with automatic belt tensioner with a life expectancy of 30,000 hours.
The Vault-ultimate control board reliability. Hardened solid-state control technology, housed in a sealed vault. The vault's sealed connections are made through watertight plugs that make these components impenetrable to dust and moisture.
Independent compressor controls include an on/off switch for applications not requiring compressed air. At idle speed, the Air Pak will produce 100 PSI at 60 CFM.
Quiet - at only 70 db (95 Lwa) when idle, 79 db (104 Lwa) at maximum output. Improves work site communications.
Hot Start provides positive stick electrode starts to make it easy to start all types of electrodes.
Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out.
Optional AC/DC/battery charge/jump-start for AC TIG welding and 12 or 24 volt batteries. Simply select the battery voltage and connect cables to the separate battery output studs. Note: High-frequency control required for AC TIG welding.
Meets NEMA and IEC output ratings.
Recommended Accessory (#195 117)
Eliminates moisture in the air stream & prevents air line freeze-ups in cold climates.