BRAND NEW 2012 MILLER 3-PHASE WITH KOHLER ENGINE. 907505.

Listing for WELDER/GENERATOR only. Capable of TIG, MIG and Stick with available options listed in our EBay store.

Not rebuilt, not reconditioned, brand new, Everything you need to weld, just add leads or other options, which are listed in our ebay store.

THIS WELDER IS USUALLY SHIPPED DIRECT FROM INDIANA OXYGEN CO. OR MAY BE SHIPPED DIRECT FROM NEAREST MILLER ELECTRIC WAREHOUSE ON A SEMI TRUCK, WE NEED GOOD DAYTIME PHONE NUMBER SO TRUCKING CO. CAN CALL AND SET DELIVERY APPOINTMENT AS SOMEONE MUST BE THERE TO UNLOAD. ARRANGEMENTS CAN BE MADE TO PICK UP AT NEAREST TERMINAL--HOWEVER WE CANNOT GUARANTEE HOW CLOSE THAT WILL BE. WE ALSO SHIP TO UNCONFIRMED ADDRESS'S IF YOU WANT TO SHIP TO A BUSINESS NEAR YOU WITH A DOCK OR FORKLIFT. WE DO NOT PROVIDE LIFT GATE SERVICE.

IMPROVED! Quieter and better sound

Significant improvements in sound level and quality offer better jobsite communication, which provides a safer, more efficient working environment for you and your crew. New Bobcat welder/generators have rotated the engine toward the front to create more efficient airflow, resulting in significantly quieter operation. Now you can start your job earlier in the day and end it later, as well as work around hospitals, businesses, and residential areas.

IMPROVED! Easier maintenance

With its intuitive design, the daily maintenance of our new Bobcat welder/ generators is faster and easier. With front panel maintenance displays, you know when your equipment needs to be serviced. And servicing is simple because of:

• Oil checks that can be performed from the top by the front panel
• Toolless panels that allow for quick access
• Single-side fuel fill and oil drain/filter

Accu-Rated™– Not Inflated Generator Power

Miller’s Accu-Rated™ 11,000 watts (12,000 with EFI) of usable peak power is delivered for a minimum of 30 seconds. Accu-Rated means peak power is usable for maximum generator loads such as plasma cutting, Millermatic® MIG welders and motor starting. Accu-Rated peak power beats the competition’s very shortduration peak or surge power. Use your peak power, it’s more than a number.

Reversed Generator Airflow

Exclusive engine and generator packaging design operates cooler and more efficiently. The engine is rotated towards the front to create more efficient airflow. More efficient airflow and exclusive engine location are significant contributors to reduced sound level and size reduction. Hot air recirculation is eliminated when machine is mounted in tight spots, and internal parts are kept cool for optimal performance.

IMPROVED! Smaller and lighter design

New Bobcat welder/generators take up less space on trucks and trailers— leaving more room on your truck for other equipment and tools. Plus, they’re easier to move safely around jobsites—even with weld cables and running gear attached.

Smooth Power – Not Spike Power

Revolutionary ten-degree skewed-rotor design optimizes generator performance for smoother power - not spiked power found with other brands. Better power— better performance.

Designed for Reliability

From Appleton, Wis. USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core:

• Copper windings and iron generator components for a quality-built machine
• Lugged — not soldered — heavy internal leads for better field durability
• Superior cooling technology for maximum performance and engine life
• Super-tough armor to protect the welder/generator from accidental impact
• Protective armor doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
• Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability
• Long runtimes provide many hours of use before refueling is necessary

rocesses	MIG (GMAW)
	Stick (SMAW)
	Flux Cored (FCAW)
	DC TIG (DC GTAW)
	Air Plasma Cutting and Gouging (PAC) with Optional Spectrum Models
General specifications	Rated Output	CC/AC Stick/TIG: 200 Amps at 25 Volts CC/DC Stick/TIG: 210 Amps at 25 Volts CV/DC MIG/FCAW: 200 Amps at 20 Volts
	Welding Amperage Range	Stick/TIG: 50 - 200 Amps CC/DC Stick/TIG: 50 - 225 Amps CV/DC MIG/FCAW: 19-28 Volts
	Net Weight	495 lb (225 kg)
	Generator Power 104DegF	Accu-Rated Power Three-Phase 11,000 Watts Peak, 10,000 Watts Continuous, 480 VAC   Single-Phase 11,000 Watts Peak, 9,500 Watts Continuous, 120/240 VAC
	Engine	Gas Kohler CH 23, 23 HP at 3,600 RPM - 3 year warranty Note: Engine warranted separately by engine manufacturer
	Fuel RunTime Capacity	Fuel Capacity 12 gal (45L)   Run Time Welding with an 1/8 inch Stick electrode, 20% Duty Cycle, expect about 20 hours of operation. Under a continuous 4,000 watt generator load, expect approximately 14 hours of run time.
Applications	Fabrication
	Farm and Ranch
	Field Maintenance and Repair
Product Literature	Spec Sheet (ENG)
Warranty		With the best coverage in the industry, Miller's True Blue® Warranty [PDF] delivers unparalleled peace-of-mind.

You can call me at 866-854-7380 FROM 5:00AM-7:00PM PT, 7 DAYS A WEEK

WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR EMAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SEPARATE EMAIL.

THIS WELDER IS USUALLY SHIPPED DIRECT FROM INDIANA OXYGEN CO. OR MAY BE SHIPPED DIRECT FROM NEAREST MILLER ELECTRIC WAREHOUSE ON A SEMI TRUCK, WE NEED GOOD DAYTIME PHONE NUMBER SO TRUCKING CO. CAN CALL AND SET DELIVERY APPOINTMENT AS SOMEONE MUST BE THERE TO UNLOAD. ARRANGEMENTS CAN BE MADE TO PICK UP AT NEAREST TERMINAL--HOWEVER WE CANNOT GUARANTEE HOW CLOSE THAT WILL BE. WE ALSO SHIP TO UNCONFIRMED ADDRESS'S IF YOU WANT TO SHIP TO A BUSINESS NEAR YOU WITH A DOCK OR FORKLIFT. WE DO NOT PROVIDE LIFT GATE SERVICE.

All items are covered by Manufacturer warranties.. We will help you with any warranty issues.

Small items shipped by Economy mail, with Priority mail option, or UPS ,each listing shows the standard way it will ship, with options for faster shipping. , , unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door.

Additional charges for lift gates or special delivery are at your cost.

We strive to always have stock available for shipping, but from time to time stock-outs may occur. You will be notified if that occurs. Some welders are not stock items and will be ordered from manufacturer when paid for. It usually takes only a few days to ship to you. Some are shipped direct from manufacturer.

WE INSURE ALL SHIPMENTS . NO RETURNS UNLESS DAMAGED BEYOND REASONABLE REPAIR IN SHIPMENT OR AGREED UPON RE-STOCKING AND SHIPPING CHARGES PRIOR TO RETURN.. EXCHANGES ONLY WHEN AGREED BEFORE RETURNING. EXCHANGES AND RETURNS SUBJECT TO 20% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRANTIES BY MFG'S. NO INTERNATIONAL SHIPMENTS

ALASKA AND HAWAII BUYERS PLEASE SEND EMAIL FROM "ASK SELLER A QUESTION" above with complete address so we can email you your shipping cost BEFORE CLICKING BUY IT NOW..

PesaMember