Power source
6 ft (1.8 m) power cord and MVP™ plugs
10 ft (3 m) M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith® Argon and AR/CO2 mix regulator/flow gauge with hose
Spool of Hobart® .030 in (0.8 mm) solid wire
Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) wire
Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
Factory-installed gas solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge (#229 895)
770187 HEAVY DUTY CART

FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES.

YOU CAN CALL US AT 866-854-7380 FROM 5:00AM-7:00PM PACIFIC TIME 7 DAYS A WEEK

MILLER BUILD WITH BLUE CASH BACK PROMOTION--Note the price paid here on Ebay does NOT include the rebate.

This listing qualifies for the 5% rebate all buy itself , Purchase $3.00 of additional Miller or Hobart product. because the cart in this listing got you $147.00 of the required $150.00, read below how you can get a total of 15% rebate So you only need $3.00 more in Miller or Hobart items to get the 15% Rebate.

Here's How It Works

Save 15%

Purchase any eligible Miller® equipment. Purchases must be made during the promotion period, which begins on March 1, 2013, and ends on May 31, 2013.
Purchase additional Miller or Hobart® products with a value equaling or exceeding $150 on the same invoice.
Correctly complete and submit the official rebate form, along with all required receipts and documentation. Rebate requests must be postmarked before June 15, 2013. See terms and conditions for complete details.

Save 5%

Purchase any eligible Miller equipment. Purchases must be made during the promotion period, which begins on March 1, 2013, and ends on May 31, 2013.
Correctly complete and submit the official rebate form, along with all required receipts and documentation. Rebate requests must be postmarked before June 15, 2013. See terms and conditions for complete details

Frequently Asked Questions

What products are eligible for the Rebate Promotion?

Only the equipment listed here is eligible for the rebate.

Millermatic® 140 Auto-Set™ MIG Welder
Millermatic® 180 Auto-Set™ MIG Welder
Millermatic® 211 Auto-Set™ with MVP™ MIG Welder
Multimatic™ 200 MIG/TIG/Stick Welder
Diversion™ 165 AC/DC TIG Welder
Diversion™ 180 AC/DC TIG Welder
Spectrum® 375 X-TREME™ Plasma Cutter
Spectrum® 625 X-TREME™ Plasma Cutter
Can I purchase any additional Miller or Hobart® products to get the 15% rebate?

Yes — you may purchase any Miller or Hobart branded products as long as the total amount of the products is valued at $150 or more. Bundled purchases must be made on the same invoice on the same day. Only the Eligible Equipment listed above will receive the rebate.
How long will it take to process my rebate?

Please allow 2–4 weeks after mailing to receive your rebate via mail.

We strongly suggest you use the Ebay Shopping Cart instead of Buy it Now so items you add for the 15% rebate can all be on one invoice.

Millermatic 211 Auto-Set with MVP

Welds material from 24 gauge to 3/8 in thick in a single pass

Pricing

Base Model
Starting at:

List Price (US$)

Process

MIG (GMAW)
Flux Cored (FCAW)

Applications

Light Industrial Applications

Light Fabrication
Maintenance and Repair
Garage/ Body Shop
Farm/Home

Specifications

Input Power

230 V, 25 A, 60 Hz, 1-Phase
120 V, 20 A, 60 Hz, 1-Phase

Rated Output

150 A at 23.5 VDC, 30% duty cycle (230V)
90 A at 20 VDC, 20% duty cycle (120V)

Welding Amperage Range

30 - 210 Amps

Wire Speed

60 - 460 IPM (1.5 - 11.7 m/min)

Net Weight

74lb (33.6 kg)

Comes Complete With

Power source
6 ft (1.8 m) power cord and MVP™ plugs
10 ft (3 m) M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith® Argon and AR/CO2 mix regulator/flow gauge with hose
Spool of Hobart® .030 in (0.8 mm) solid wire
Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) wire
Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
Factory-installed gas solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge (#229 895)
770187 HEAVY DUTY CART

Product Information

Product Literature (PDF)

SmartSelector™ - Product Selection Made Easy

MIG Resources

Mild Steel Welding Capability
Not to scale.

Min. — 24 ga (.8 mm)

Max. — 3/8 in (9.5 mm)

Auto-Set: The right settings automatically -

Set the wire diameter, a blue light shows that Auto-Set is activated
Dial in the thickness of what you're welding
Start welding with the exact parameters you need!

Infinite voltage control gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or anytime you want to set your own parameters on mild steel.

Welds thickest material in its class! The Millermatic 211 Auto-Set with MVP has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 V.

Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set™ with MVP™, the new Spoolmate™ 100 Series spoolgun allows you to weld from 18 ga - 3/8 in aluminum.

Smooth-Start™ patented technology provides a smooth, spatter-free start. It's the best-starting machine in the small MIG machine category. No pop gun starts and virtually no spatter to clean up.

Miller Exclusive! Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle and connect it to the power cord.

Durable cast aluminum drive system incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.

Miller's exclusive "Tip Saver" short circuit protection™ shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than at the machine.

Cable management built into the handle.

Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.

Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored.

THE FOLLOWING CONSUMABLES AND ACCESSORIES MAY BE ORDERED WITH WELDER AT NO ADDITIONAL SHIPPING CHARGE.

087299 .023/025 CONTACT TIPS PKG OF 10

000067 .030 CONTACT TIPS PKG OF 10

000068 .035 CONTACT TIPS PKF OF 10

000069 .045 CONTACT TIPS PKG OF 10

169716 TIP ADAPTOR PKG OF 2

194010 .023/.025 LINER

194011 .030/.035 LINER

194012 .035/.045 LINER

169715 NOZZLE

226190 NOZZLE FOR FLUX CORE WIRE

202926 .030/.035/.045 DR ROLL

FOR FLUX CORE WIRE

234607 .023 CONSUMABLES KIT

234608 .030 CONSUMABLES KIT

234609 .035 CONSUMABLES KIT

CS15 FLUX CORE WIRE .030 X 10#

NR211 FLUX CORE WIRE .035X10#

CS15 FLUX CORE WIRE .045X10#

195149 PROTECTIVE COVER

ER70S6 .023 X 11# SPOOL

ER70S6 .030 X 11# SPOOL

ER70S6 .035 X 11# SPOOL

20CF CYLINDER

40CF CYLINDER

80CF CYLINDER

ALL THESE ITEMS AVAILABLE FOR PURCHASE IN OUR EBAY STORE. CLICK LINK BELOW.

PayPal: Paypal is preferred payment method.

Credit Cards: Now right here in checkout, select Credit Card Option and enter information exactly as on credit card statement and card. You may change ship to address during check-out. Call 866-854-7380, 8AM to 9PM Eastern Time (EST) 7 days a week with questions or concerns

We expect payment within 3 days of purchase. We must charge sales tax as follows; Indiana (7%), Ohio (6.5%), Illinois (6.25%) and Michigan (6%).

WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR EMAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SEPARATE EMAIL.

FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES.

All items are covered by Manufacturer warranties.. We will help you with any warranty issues.

Small items shipped by Economy mail, with Priority mail option, or UPS ,each listing shows the standard way it will ship, with options for faster shipping. , , unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door.

Additional charges for lift gates or special delivery are at your cost.

Some welders are not stock items and will be ordered from manufacturer when paid for. This is stated clearly in the listings that are non-stock items. It usually takes only a few days to ship to you. Some are shipped direct from manufacturer.

WE INSURE ALL SHIPMENTS . NO RETURNS UNLESS DAMAGED BEYOND REASONABLE REPAIR IN SHIPMENT OR AGREED UPON RE-STOCKING AND SHIPPING CHARGES PRIOR TO RETURN.. EXCHANGES ONLY WHEN AGREED BEFORE RETURNING. EXCHANGES AND RETURNS SUBJECT TO 20% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRANTIES BY MFG'S. NO INTERNATIONAL SHIPMENTS

ALASKA AND HAWAII BUYERS PLEASE SEND EMAIL FROM "ASK SELLER A QUESTION" above with complete address so we can email you your shipping cost BEFORE CLICKING BUY IT NOW..

Indiana Oxygen Co. has been under same ownership since 1915, making us the Oldest Welding Supply under same ownership in the USA.

We take pride is selling quality Products at fair prices. We ship quickly and insure all shipments at our cost.

PesaMember

Visit Our for more great deals!

Add us to your list!

Return to Catalog

Miller Millermatic 211 MIG Welder Pkg with HD Cart (907422)

MILLER MILLERMATIC 211 W/AUTOSET MIG WELDER 907422 AND HEAVY DUTY CART 770187

Comes Complete With

Here's How It Works

Frequently Asked Questions

What products are eligible for the Rebate Promotion?

Can I purchase any additional Miller or Hobart® products to get the 15% rebate?

How long will it take to process my rebate?

Millermatic 211 Auto-Set with MVP

Pricing

Process

Applications

Specifications

Comes Complete With

Product Information

MIG Resources