{"title":"Titanium Machines","description":"","products":[{"product_id":"miller-dynasty-200-dx-tig-welder-907099011","title":"Miller Dynasty 200 DX TIG Welder (907099011)","description":"\u003cstrong\u003e This product is no longer available.  The suggested replacement is the Dynasty 210DX (907686)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\nThe Miller Dynasty 200 DX offers pulse on\/off, pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eWireless Remote Control Compatible \u003c\/b\u003e\u003cbr\u003e\nImprove productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime\/repair costs and extend the operator's welding range without adding cord extensions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eLift-Arc\u003c\/b\u003e\u003cbr\u003e\nLift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003e\nFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003e\nAllows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eAC Waveforms\u003c\/b\u003e\u003cbr\u003e\n• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e\n• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e\n• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e\n• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eAC and DC TIG Features\u003c\/b\u003e\u003cbr\u003e\n• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e\n• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e\n• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\n• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Dynasty 200 DX power source\u003cbr\u003e \n• Quick Reference Guide: English | Spanish\u003cbr\u003e  \n• 8 ft (2.4 m) primary cord (No Plug)\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e  \n• Air-cooled torch adapter (195378)\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439621296415,"sku":"IMIL00000119","price":3355.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/mil907099011_3.jpg?v=1724690571"},{"product_id":"miller-dynasty-800-tig-welder-and-water-cooled-package-with-wireless-foot-control-951000008","title":"Miller Dynasty 800 TIG Welder and Water-Cooled Package with Wireless Foot Control (951000008)","description":"\u003cp\u003eThe Miller Dynasty 800 TIG Welder with Water-Cooled Package and Wireless Foot Control is a powerful, compact power source capable of welding up to 1” aluminum. Total arc control provides maximum productivity and weld quality while conserving energy compared to traditional welding machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7 Inch LCD Display\u003c\/strong\u003e\u003cbr\u003eEnsures proper machine setup and parameter selection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003eFor more consistent non-contact starts and greater reliability compared to traditional HF arc starters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e120 V Auxiliary Power\u003c\/b\u003e\u003cbr\u003eThe Dynasty 800 has a 120 V auxiliary power receptacle for the cooling system or small tools.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003eFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003eAllows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProgram memory\u003c\/b\u003e\u003cbr\u003eProgram memory features 9 independent program memories that maintain\/save your parameters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMeter Calibration\u003c\/b\u003e\u003cbr\u003eAllows meters to be calibrated for certification.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAC Waveforms\u003c\/b\u003e\u003cbr\u003e• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAC and DC TIG Features\u003c\/b\u003e\u003cbr\u003e• Independent amplitude\/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.\u003cbr\u003e• Extended AC balance controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e• AC frequency (20-400 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e• High-speed DC TIG pulse controls - Pulse frequency capable of pulsing 5000 pulses per second. Pulsing adds arc stability, reduces heat input and warpage and can increase travel speeds. Other parameters include peak amperage, peak time and background amperage.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\u003cbr\u003e\u003cu\u003eCart with the following features:\u003c\/u\u003e\u003cbr\u003e• Single cylinder rack\u003cbr\u003e• Foot pedal holder\u003cbr\u003e• (3) Cable\/torch holders\u003cbr\u003e• (2) TIG electrode filler holders\u003cbr\u003e\u003cbr\u003e\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e• Dynasty 800 power source\u003cbr\u003e• 2) Thread lock adapters (225029)\u003cbr\u003e• (1) Water cooled thread lock torch adapter (225028) for #18 or #20 torches\u003cbr\u003e• Coolmate 3.5 Coolant System\u003cbr\u003e• Wireless remote foot control (301580)\u003cbr\u003e• 25ft (7.6 m) Weldcraft WP18SC water-cooled torch\u003cbr\u003e• Torch cable cover\u003cbr\u003e• AK18C torch accessory kit includes: shielding cups, collets, collet bodies, and 2% cerium tungsten electrodes (3\/32, 1\/8 and 5\/32 in)\u003cbr\u003e• Smith regulator\/flowmeter H1954D-580\u003cbr\u003e• Gas hose (regulator to machine)\u003cbr\u003e• 12 ft (3.7 m) 4\/0 weld lead with clamp (work or ground lead)\u003cbr\u003e• 4 gallons of pre-mixed low-conductivity coolant (043810)\u003cbr\u003e• Note - Primary cord must be ordered separately.\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439638860063,"sku":"IMIL00000319","price":31612.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951000008Lit.jpg?v=1724691138"},{"product_id":"miller-dynasty-800-tig-welder-and-water-cooled-package-with-foot-control-951696","title":"Miller Dynasty 800 TIG Welder and Water-Cooled Package with Foot Control (951696)","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/products\/miller-dynasty-800-tig-welder-and-water-cooled-package-with-wireless-foot-control-951000008?_pos=2\u0026amp;_sid=fbd9ce6e2\u0026amp;_ss=r\"\u003e\u003cstrong\u003eThis dynasty package has been replaced by the Dynasty 800 w\/wireless foot control (951000008).\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Miller Dynasty 800 TIG Welder is a powerful, compact power source capable of welding up to 1” aluminum. Total arc control provides maximum productivity and weld quality while conserving energy compared to traditional welding machines.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003eFor more consistent non-contact starts and greater reliability compared to traditional HF arc starters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e120 V Auxiliary Power\u003c\/b\u003e\u003cbr\u003eThe Dynasty 800 has a 120 V auxiliary power receptacle for the cooling system or small tools.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003eFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003eAllows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProgram memory\u003c\/b\u003e\u003cbr\u003eProgram memory features 9 independent program memories that maintain\/save your parameters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMeter Calibration\u003c\/b\u003e\u003cbr\u003eAllows meters to be calibrated for certification.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAC Waveforms\u003c\/b\u003e\u003cbr\u003e• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAC and DC TIG Features\u003c\/b\u003e\u003cbr\u003e• Independent amplitude\/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.\u003cbr\u003e• Extended AC balance controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e• AC frequency (20-400 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e• High-speed DC TIG pulse controls - Pulse frequency capable of pulsing 5000 pulses per second. Pulsing adds arc stability, reduces heat input and warpage and can increase travel speeds. Other parameters include peak amperage, peak time and background amperage.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\u003cbr\u003e\u003cu\u003eCart with the following features:\u003c\/u\u003e\u003cbr\u003e• Single cylinder rack\u003cbr\u003e• Foot pedal holder\u003cbr\u003e• (3) Cable\/torch holders\u003cbr\u003e• (2) TIG electrode filler holders\u003cbr\u003e\u003cbr\u003e\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e• Dynasty 800 power source\u003cbr\u003e• 2) Thread lock adapters (225029)\u003cbr\u003e• (1) Water cooled thread lock torch adapter (225028) for #18 or #20 torches\u003cbr\u003e• Coolmate 3.5 Coolant System\u003cbr\u003e• RFCS-14 HD Foot Control (194744)\u003cbr\u003e• 25ft (7.6 m) Weldcraft WP18SC water-cooled torch\u003cbr\u003e• Torch cable cover\u003cbr\u003e• AK18C torch accessory kit includes: shielding cups, collets, collet bodies, and 2% cerium tungsten electrodes (3\/32, 1\/8 and 5\/32 in)\u003cbr\u003e• Smith regulator\/flowmeter H1954D-580\u003cbr\u003e• Gas hose (regulator to machine)\u003cbr\u003e• 12 ft (3.7 m) 4\/0 weld lead with clamp (work or ground lead)\u003cbr\u003e• 4 gallons of pre-mixed low-conductivity coolant (043810)\u003cbr\u003e• Note - Primary cord must be ordered separately.\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439692206367,"sku":"IMIL20130133","price":28342.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951696.jpg?v=1692907951"},{"product_id":"miller-syncrowave-350-lx-tig-welder-907199","title":"Miller Syncrowave 350 LX TIG Welder (907199)","description":"\u003cstrong\u003eThe Syncrowave 350 is no longer available.  The suggested replacement is the Syncrowave 400 (907783).  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\nThe Miller Syncrowave 350 LX TIG Welder provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSquarewave technology\u003c\/b\u003e\u003cbr\u003e\nSquarewave technology was developed by Miller Electric in 1976 to improve your weld quality and make TIG welding easier. Miller Squarewave technology provides arc stability when welding aluminum, prevents arc rectification and eliminates tungsten erosion.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSyncro Start\u003c\/b\u003e\u003cbr\u003e\nThis allows the choice of Soft, Standard or Hot TIG starts based on the application, lead lengths and tungsten size.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eLast procedure recall\u003c\/b\u003e\u003cbr\u003e\nSimplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003ePulsed TIG control\u003c\/b\u003e\u003cbr\u003e\nThis control lowers the heat input into the part and reduces warping and distortion.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBalance control\u003c\/b\u003e\u003cbr\u003e\nThe balance control is adjustable to provide additional oxide removal (more cleaning) or less cleaning based on the condition of the material being welded.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eDigital welding meters\u003c\/b\u003e\u003cbr\u003e\nDisplay both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeat-ability in your welding procedure.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAdaptive Hot Start\u003c\/b\u003e\u003cbr\u003e\nStick welding features such as Adaptive Hot Start™ provide good arc strikes without sticking. Once welding, the DIG control makes dynamic adjustments to the welder to ensure smooth E7018 and deep penetration E6010.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Syncrowave 350 LX power source\u003cbr\u003e \n• (2) Dinse 50 mm connectors\u003cbr\u003e   \n• Note - Primary cord and TIG torch adapter sold separately.\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439692370207,"sku":"IMIL20130140","price":6495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907199.jpg?v=1692907952"},{"product_id":"miller-xmt-350-mpa-multiprocess-welder-with-tweco-907366014","title":"Miller XMT 350 MPa Multiprocess Welder with Tweco (907366014)","description":"\u003cp\u003e\u003cstrong\u003eThe XMT 350 MPa has been discontinued.  The suggested replacement is the XMT 400 (907865, 907881) or XMT 450 MPa (907479).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XMT 350 MPA multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 350 CC\/CV models are the most popular due to the flexibility of a 14-pin connection for spool guns, feeders, and remote controls. The MPA model has built-in pulse programs for manufacturing and fabrication applications that have benefits for standards steels, high-strength steels and aluminum. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis unit comes with Tweco Connections.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 5-425A\u003cbr\u003e• Duty Cycle: 60% @ 350A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 80 lbs\u003cbr\u003e• Dims: 17\" H x 12.5\" W x 24\" D\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439692534047,"sku":"IMIL20130172","price":10297.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907366014.jpg?v=1692907954"},{"product_id":"miller-xmt-350-mpa-multiprocess-welder-907366","title":"Miller XMT 350 MPa Multiprocess Welder (907366)","description":"\u003cp\u003e\u003cstrong\u003eThe XMT 350 MPa has been discontinued.  The suggested replacement is the XMT 400 (907865, 907881) or XMT 450 MPa (907479).\u003c\/strong\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439693320479,"sku":"IMIL20130170","price":9769.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907366.jpg?v=1692907957"},{"product_id":"miller-syncrowave-250-dx-tig-welder-907195","title":"Miller Syncrowave 250 DX TIG Welder (907195)","description":"\u003cstrong\u003eThe Syncrowave 250 is no longer available.  The suggested replacement is the Syncrowave 300 (907782). \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\nThe Miller Syncrowave 250 DX TIG Welder has proven itself time and time again in the most demanding applications. Its industrial design and construction ensure reliable operation for years to come.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSquarewave technology\u003c\/b\u003e\u003cbr\u003e\nSquarewave technology was developed by Miller Electric in 1976 to improve your weld quality and make TIG welding easier. Miller Squarewave technology provides arc stability when welding aluminum, prevents arc rectification and eliminates tungsten erosion.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSyncro Start\u003c\/b\u003e\u003cbr\u003e\nThis allows the choice of Soft, Standard or Hot TIG starts based on the application, lead lengths and tungsten size.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eLast procedure recall\u003c\/b\u003e\u003cbr\u003e\nSimplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBalance control\u003c\/b\u003e\u003cbr\u003e\nThe balance control is adjustable to provide additional oxide removal (more cleaning) or lesscleaning based on the condition of the material being welded.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eDigital welding meters\u003c\/b\u003e\u003cbr\u003e\nDisplay both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAdaptive Hot Start\u003c\/b\u003e\u003cbr\u003e\nStick welding features such as Adaptive Hot Start™ provide good arc strikes without sticking. Once welding, the DIG control makes dynamic adjustments to the welder to ensure smooth E7018 and deep penetration E6010.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Syncrowave 250 DX power source\u003cbr\u003e \n• (2) Dinse 50 mm connectors\u003cbr\u003e   \n• Note - Primary cord and TIG torch adapter sold separately.\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439693582623,"sku":"IMIL20130138","price":4295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907195_1.jpg?v=1692907960"},{"product_id":"miller-dynasty-200-sd-tig-welder-907099","title":"Miller Dynasty 200 SD TIG Welder (907099)","description":"The Miller Dynasty 200 SD Welder provides the basic features that are required for most AC\/DC TIG or Stick welding applications.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eWireless Remote Control Compatible \u003c\/b\u003e\u003cbr\u003e\nImprove productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime\/repair costs and extend the operator's welding range without adding cord extensions.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eLift-Arc\u003c\/b\u003e\u003cbr\u003e\nLift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003e\nFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003e\nAllows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eAC Waveforms\u003c\/b\u003e\u003cbr\u003e\n• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e\n• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e\n• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e\n• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eAC and DC TIG Features\u003c\/b\u003e\u003cbr\u003e\n• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e\n• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e\n• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\n• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Dynasty 200 SD power source\u003cbr\u003e \n• Quick Reference Guide: English | Spanish\u003cbr\u003e  \n• 8 ft (2.4 m) primary cord\u003cbr\u003e  \n• DVD set-up video\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e  \n• Air-cooled torch adapter (195378)\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439694008607,"sku":"IMIL20130122","price":3131.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907099.jpg?v=1692907966"},{"product_id":"miller-syncrowave-250-dx-tig-welder-package-951118","title":"Miller Syncrowave 250 DX TIG Welder Package (951118)","description":"\u003cstrong\u003eThe Syncrowave 250 is no longer available.  The suggested replacement is the Syncrowave 300 (951829). \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\nThe Miller Syncrowave 250 DX TIG Welder Package has proven itself time and time again in the most demanding applications. Its industrial design and construction ensure reliable operation for years to come. This package includes Running Gear, a Coolmate 3X Cooler, remote foot control, and a whole lot of other accessories.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSquarewave technology\u003c\/b\u003e\u003cbr\u003e\nSquarewave technology was developed by Miller Electric in 1976 to improve your weld quality and make TIG welding easier. Miller Squarewave technology provides arc stability when welding aluminum, prevents arc rectification and eliminates tungsten erosion.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSyncro Start\u003c\/b\u003e\u003cbr\u003e\nThis allows the choice of Soft, Standard or Hot TIG starts based on the application, lead lengths and tungsten size.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eLast procedure recall\u003c\/b\u003e\u003cbr\u003e\nSimplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBalance control\u003c\/b\u003e\u003cbr\u003e\nThe balance control is adjustable to provide additional oxide removal (more cleaning) or lesscleaning based on the condition of the material being welded.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eDigital welding meters\u003c\/b\u003e\u003cbr\u003e\nDisplay both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAdaptive Hot Start\u003c\/b\u003e\u003cbr\u003e\nStick welding features such as Adaptive Hot Start™ provide good arc strikes without sticking. Once welding, the DIG control makes dynamic adjustments to the welder to ensure smooth E7018 and deep penetration E6010.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Syncrowave 250 DX power source\u003cbr\u003e \n• No. 37 Running Gear\u003cbr\u003e  \n• Coolmate 3X Cooler\u003cbr\u003e  \n• Coolant (4 gallons)\u003cbr\u003e  \n• RFCS-14 remote foot control\u003cbr\u003e  \n• 15 ft (4.6 m) work lead with clamp and Dinse connector\u003cbr\u003e  \n• Gas hose\u003cbr\u003e  \n• Regulator\/flowmeter\u003cbr\u003e  \n• Cable cover\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003e25 ft (7.6 m) 250 A Weldcraft WP20 water-cooled torch Torch accesory kit with tungsten\u003c\/u\u003e\u003cbr\u003e   \n• Sheilding cups\u003cbr\u003e  \n• Collets-1\/16, 3\/32, 1\/8\u003cbr\u003e  \n• Collet Bodies-1\/16, 3\/32, 1\/8\u003cbr\u003e  \n• 2% Cerium Tungsten-1\/16, 3\/32, 1\/8\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439694106911,"sku":"IMIL20130139","price":7095.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951118.jpg?v=1692907967"},{"product_id":"miller-xmt-350-cc-cv-multiprocess-welder-907161","title":"Miller XMT 350 CC\/CV Multiprocess Welder (907161)","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/products\/miller-xmt-400-arcreach-welder-w-dinse-connectors-907865004?_pos=2\u0026amp;_psq=907865\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003e\u003cstrong\u003eThe XMT 350 has been replaced by the XMT 400 (907865004).\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 350 CC\/CV models are the most popular due to the flexibility of a 14-pin connection for spool guns, feeders, and remote controls. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle. \u003cbr\u003e\u003cbr\u003eThe \u003cstrong\u003eDinse or Tweco-style Disconnects\u003c\/strong\u003e provide high-quality weld cable connections. (Two dinse connectors are supplied with each Dinse machine)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 5-425A\u003cbr\u003e• Duty Cycle: 60% @ 350A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 80 lbs\u003cbr\u003e• Dims: 17\" H x 12.5\" W x 24\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439694369055,"sku":"IMIL20130162","price":8026.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907161.jpg?v=1719838318"},{"product_id":"miller-xmt-450-cc-cv-575-v-multiprocess-welder-907482","title":"Miller XMT 450 CC\/CV (575 V) Multiprocess Welder (907482)","description":"The XMT multi-process welders offer portability, auto-line technology,  and excellent arc performance.  The XMT 450 CC\/CV models are the most popular due to the flexibility of a 14-pin connection for spool guns, feeders, and remote controls.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• \u003cstrong\u003e575 Volt, 3-Phase Only\u003c\/strong\u003e\u003cbr\u003e\n• Adaptive Hot Start\u003cbr\u003e\n• Infinite Arc Control\u003cbr\u003e\n• Lift-Arc\u003cbr\u003e\n• Fan-on-Demand\u003cbr\u003e\n• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e\n• Large, Dual Digital Meters\u003cbr\u003e\n• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\n\nThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eThe XMT 450 units come with 1\/2\" stud connectors. \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Voltage Capability: \u003cstrong\u003e575V 3-Phase Only\u003c\/strong\u003e\u003cbr\u003e\n• Voltage Range: 10-38V\u003cbr\u003e\n• Amperage Range: 15-600A\u003cbr\u003e\n• Duty Cycle: 100% @ 450A 3-Phase\u003cbr\u003e\n• Weight: 122 lbs\u003cbr\u003e\n• Dims: 17.25\" H x 14.5\" W x 27.125\" D\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439694467359,"sku":"IMIL20130169","price":7843.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907482.jpg?v=1692907973"},{"product_id":"miller-diversion-180-tig-welder-package-907460","title":"Miller Diversion 180 TIG Welder Package (907460)","description":"\u003cstrong\u003eThis item is no longer available from Miller. The Miller Diversion 180 TIG Welder Package (907460) has now been replaced by the \u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/products\/miller-diversion-180-ac-dc-tig-welder-complete-907627\" miller-diversion-180-ac-dc-tig-welder-complete-907627=\"\"\u003ethe new Diversion 180 TIG Welder Package\u003c\/a\u003e. If you'd prefer to view all our Miller Welding Equipment, click \u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/collections\/miller\" brand=\"\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e The Miller Diversion 180 TIG Welder Package is perfect for the personal user. This AC\/DC TIG machine sports both 115V and 230 V input power.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEasy-to-Understand Operator Interface\u003c\/b\u003e\u003cbr\u003e It's as easy as \"1, 2, 3\" to set your machine and start welding! 1. Power-up. 2. Select material type. 3. Set material thickness range. Miller has also added a digital display so you know exactly what your settings are.\u003cbr\u003e\u003cbr\u003e \u003cb\u003ePortable\u003c\/b\u003e\u003cbr\u003e Whether it's in the shop, garage or at the race track, at 50 lbs it can be taken anywhere. You can't do that with those heavy transformer machines!\u003cbr\u003e\u003cbr\u003e \u003cb\u003eReduce Noise, Maintenance and Operating Costs.\u003c\/b\u003e\u003cbr\u003e Our Fan-On-Demand cooling system only operates when needed. This cuts down on fan noise and reduces power consumption and contaminants drawn into the machine.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eUse It On 115 AND 230 Volt Input Power\u003c\/b\u003e\u003cbr\u003e Miller's Multi Voltage Plug (MVP) allows you to connect to common 115 or 230 V power receptacles without the use of any tools. Simply chose the plug that fits the receptacle and connect it to the power cord.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eUtilizes Latest Inverter Technology\u003c\/b\u003e\u003cbr\u003e By utilizing an inverter-based AC\/DC power source, a more efficient (less energy is used) and consistent welding arc are provided compared to older transformer based TIG machines.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eDependable Arc Starts\u003c\/b\u003e\u003cbr\u003e Provides HF, non-contact arc starting to eliminate tungsten and material contamination time after time.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEliminate Waste of Expensive Shielding Gas\u003c\/b\u003e\u003cbr\u003e Our Auto-Postflow feature optimizes postflow time based on welding amperage. This allows for proper shielding of both the weld end zone and electrode every time without waste of gas or need for adjustment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eTwo Options to Control the Amperage\u003c\/b\u003e\u003cbr\u003e In every package we provide a Diversion Series foot control AND the Weldcraft LS17 TIG torch with its amperage adjustment controls built right into the handle. You have the option of using the foot control while welding at a bench and the ability to switch over to the hand control when doing those out-of-position weld jobs where it's just not comfortable to operate a foot control.\u003cbr\u003e\u003cbr\u003e \u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e •Diversion 180 power source\u003cbr\u003e • 8 ft (2.4 m) primary cord with (2) MVP plugs (219261 \u0026amp; 219258)\u003cbr\u003e • RFCS-RJ45 remote foot control (300432)\u003cbr\u003e • 12 ft (3.7 m) work lead with clamp\u003cbr\u003e • Smith Argon regulator\/flow guage with hose\u003cbr\u003e • TIG Welding for Dummies book with content written by Miller\u003cbr\u003e • Set-up and operation DVD\u003cbr\u003e • Welding project blueprint for a machine cart\/cylinder rack\u003cbr\u003e\u003cbr\u003e \u003cu\u003e12.5 ft (3.8 m) Weldcraft LS17 TIG torch with:\u003c\/u\u003e\u003cbr\u003e • Backcap\u003cbr\u003e • Ceramic gas cup\u003cbr\u003e • 3\/32 in (2.4 mm) collet and collet body\u003cbr\u003e • 2% ceriated tungsten\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439695024415,"sku":"IMIL20130136","price":1825.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907460.jpg?v=1692907980"},{"product_id":"miller-dynasty-800-tig-welder-907859","title":"Miller Dynasty 800 TIG Welder (907859)","description":"\u003cp\u003eThe Miller Dynasty 800 TIG Welder is a powerful, compact power source capable of welding up to 1” aluminum. Total arc control provides maximum productivity and weld quality while conserving energy compared to traditional welding machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7 Inch LCD Display\u003c\/strong\u003e\u003cbr\u003eEnsures proper machine setup and parameter selection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003eFor more consistent non-contact starts and greater reliability compared to traditional HF arc starters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e120 V Auxiliary Power\u003c\/b\u003e\u003cbr\u003eThe Dynasty 800 has a 120 V auxiliary power receptacle for the cooling system or small tools.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBlue Lightning - High Frequency Arc Starter\u003c\/b\u003e\u003cbr\u003eFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003eAllows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProgram memory\u003c\/b\u003e\u003cbr\u003eProgram memory features 9 independent program memories that maintain\/save your parameters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMeter Calibration\u003c\/b\u003e\u003cbr\u003eAllows meters to be calibrated for certification.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAC Waveforms\u003c\/b\u003e\u003cbr\u003e• Advanced Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAC and DC TIG Features\u003c\/b\u003e\u003cbr\u003e• Independent amplitude\/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.\u003cbr\u003e• Extended AC balance controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e• AC frequency (20-400 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e• High-speed DC TIG pulse controls - Pulse frequency capable of pulsing 5000 pulses per second. Pulsing adds arc stability, reduces heat input and warpage and can increase travel speeds. Other parameters include peak amperage, peak time and background amperage.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\u003cbr\u003e\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e• Dynasty 800 power source\u003cbr\u003e• (2) Thread lock adapters (225029)\u003cbr\u003e• (1) Water cooled thread lock torch adapter (225028) for #18 or #20 torches \u003cbr\u003e• Note - Primary cord and TIG torch must be ordered separately.\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439695810847,"sku":"IMIL20130132","price":24888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907859Dynasty800LFLit.jpg?v=1724692248"},{"product_id":"miller-xmt-450-cc-cv-multiprocess-welder-907481","title":"Miller XMT 450 CC\/CV Multiprocess Welder (907481)","description":"The XMT multi-process welders offer portability, auto-line technology,  and excellent arc performance.  The XMT 450 CC\/CV models are the most popular due to the flexibility of a 14-pin connection for spool guns, feeders, and remote controls.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Line voltage hookup (208-460V)\u003cbr\u003e\n• 3-Phase Only\u003cbr\u003e\n• Adaptive Hot Start\u003cbr\u003e\n• Infinite Arc Control\u003cbr\u003e\n• Lift-Arc\u003cbr\u003e\n• Fan-on-Demand\u003cbr\u003e\n• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e\n• Large, Dual Digital Meters\u003cbr\u003e\n• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\n\nThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eThe XMT 450 units come with 1\/2\" stud connectors. \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Voltage Capability: \u003cstrong\u003e230\/460V 3-Phase Only\u003c\/strong\u003e\u003cbr\u003e\n• Voltage Range: 10-38V\u003cbr\u003e\n• Amperage Range: 15-600A\u003cbr\u003e\n• Duty Cycle: 100% @ 450A 3-Phase\u003cbr\u003e\n• Weight: 122 lbs\u003cbr\u003e\n• Dims: 17.25\" H x 14.5\" W x 27.125\" D\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439696105759,"sku":"IMIL20130168","price":7842.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907481.jpg?v=1692907993"},{"product_id":"miller-syncrowave-350-lx-tig-welder-package-951623","title":"Miller Syncrowave 350 LX TIG Welder Package (951623)","description":"\u003cstrong\u003eThe Syncrowave 350 is no longer available.  The suggested replacement is the Syncrowave 400 (951831).  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\nThe Miller Syncrowave 350 LX TIG Welder Package provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSquarewave technology\u003c\/b\u003e\u003cbr\u003e\nSquarewave technology was developed by Miller Electric in 1976 to improve your weld quality and make TIG welding easier. Miller Squarewave technology provides arc stability when welding aluminum, prevents arc rectification and eliminates tungsten erosion.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSyncro Start\u003c\/b\u003e\u003cbr\u003e\nThis allows the choice of Soft, Standard or Hot TIG starts based on the application, lead lengths and tungsten size.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eLast procedure recall\u003c\/b\u003e\u003cbr\u003e\nSimplifies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003ePulsed TIG control\u003c\/b\u003e\u003cbr\u003e\nThis control lowers the heat input into the part and reduces warping and distortion.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBalance control\u003c\/b\u003e\u003cbr\u003e\nThe balance control is adjustable to provide additional oxide removal (more cleaning) or lesscleaning based on the condition of the material being welded.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eDigital welding meters\u003c\/b\u003e\u003cbr\u003e\nDisplay both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAdaptive Hot Start\u003c\/b\u003e\u003cbr\u003e\nStick welding features such as Adaptive Hot Start™ provide good arc strikes without sticking. Once welding, the DIG control makes dynamic adjustments to the welder to ensure smooth E7018 and deep penetration E6010.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Syncrowave 350 LX power source\u003cbr\u003e \n• No. 37 Running Gear\u003cbr\u003e  \n• Coolmate 3X Cooler\u003cbr\u003e  \n• Coolant (4 gallons)\u003cbr\u003e  \n• RFCS-14 remote foot control\u003cbr\u003e  \n• 15 ft (4.6 m) work lead with clamp and Dinse connector\u003cbr\u003e  \n• Gas hose\u003cbr\u003e  \n• Regulator\/flowmeter\u003cbr\u003e  \n• Cable cover\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003e25 ft (7.6 m) W-375 Weldcraft Super Cool TIG Torch (water-cooled)\u003c\/u\u003e\u003cbr\u003e   \n• Sheilding cups\u003cbr\u003e  \n• Collets-1\/16, 3\/32, 1\/8\u003cbr\u003e  \n• Collet Bodies-1\/16, 3\/32, 1\/8\u003cbr\u003e  \n• 2% Cerium Tungsten-1\/16, 3\/32, 1\/8\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439696236831,"sku":"IMIL20130141","price":9895.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951120.jpg?v=1692907995"},{"product_id":"miller-xmt-350-mpa-multiprocess-welder-with-auxiliary-power-907366011","title":"Miller XMT 350 MPa Multiprocess Welder with Auxiliary Power (907366011)","description":"\u003cp\u003e\u003cstrong\u003eThe XMT 350 MPa has been discontinued.  The suggested replacement is the XMT 400 (907865, 907881) or XMT 450 MPa (907479001).\u003c\/strong\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439696859423,"sku":"IMIL20130171","price":11009.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907366011.jpg?v=1692908003"},{"product_id":"miller-dynasty-300-tig-welder-with-cps-907818","title":"Miller Dynasty 300 TIG Welder with CPS (907818)","description":"The Miller Dynasty 300 TIG Welder with CPS offers full AC features, including advanced waveforms and wide range of balance and frequency. The 300 is a powerful combination of capability and portability. Welding up to 3\/8 inch material, the AC\/DC TIG and Stick power source is a powerful, energy efficient inverter.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eUpgradeable and Expandable\u003c\/b\u003e\u003cbr\u003e\nFront panel memory card data port provides the ability to easily upgrade software and expand product features.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eCooler Power Supply (CPS)\u003c\/b\u003e\u003cbr\u003e\nAn integrated 120-volt dedicated-use receptacle to power the Coolmate  1.3. The power switch on the Dynasty also activates the receptacle to help prevent torch failure. Available on select models.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003e\nAllows hookup to either single-phase or three-phase electrical input from 208-600 V with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003ePortable with adjustable shoulder strap\u003c\/b\u003e\u003cbr\u003e\nWeighing in at just 55 pounds, the Dynasty 300 is extremely portable and easy to transport featuring dual carry handles and a carrying strap.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003ePro-Set Feature (professional settings)\u003c\/b\u003e\u003cbr\u003e\nThis feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. \u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Dynasty 300 power source with CPS\u003cbr\u003e \n• Quick Reference Guide: English\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e  \n• 8 ft(2.4m) Primary cord\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439697383711,"sku":"IMIL201400002","price":10816.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907818_1.jpg?v=1692908013"},{"product_id":"miller-xmt-350-mpa-multiprocess-welder-with-suitcase-x-treme-8vs-951308","title":"Miller XMT 350 MPa Multiprocess Welder with SuitCase X-Treme 8VS (951308)","description":"\u003cp\u003ePlease see our Manufacturer's Specs tab for more information on the Miller XMT 350 MPa Multiprocess Welder with SuitCase X-Treme 8VS (951308).\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439698137375,"sku":"IMIL20130173","price":6867.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951308.jpg?v=1692908021"},{"product_id":"miller-dynasty-280-dx-tig-welder-907551","title":"Miller Dynasty 280 DX TIG Welder (907551)","description":"\u003cstrong\u003eThe 907551 has been discontinued by Miller.  The suggested replacement is the Dynasty 300 (907818). \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\nThe Miller Dynasty 280 DX TIG Welder offers full AC features, including advanced waveforms and wide range of balance and frequency. The 280 DX is a powerful combination of capability and portability. Welding up to 3\/8 inch material, the AC\/DC TIG and Stick power source is a powerful, energy efficient inverter.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eUpgradeable and Expandable\u003c\/b\u003e\u003cbr\u003e\nFront panel memory card data port provides the ability to easily upgrade software and expand product features.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eAuto-Line Power Management Technology\u003c\/b\u003e\u003cbr\u003e\nAllows hookup to either single-phase or three-phase electrical input from 208-575 V with no manual linking, providing convenience in any job setting. An ideal solution for dirty or unreliable input power.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003ePortable with adjustable shoulder strap\u003c\/b\u003e\u003cbr\u003e\nWeighing in at just 52 pounds, the Dynasty 280 is extremely portable and easy to transport featuring dual carry handles and a carrying strap.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003ePro-Set Feature (professional settings)\u003c\/b\u003e\u003cbr\u003e\nThis feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eStick Features (AC\/DC)\u003c\/b\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristic to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. \u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n• Dynasty 280 DX power source\u003cbr\u003e \n• Quick Reference Guide: English\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e  \n• 8 ft(2.4m) Primary cord\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439698858271,"sku":"IMIL201400001","price":10276.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907514.jpg?v=1692908030"},{"product_id":"miller-diversion-165-tig-welder-package-907626","title":"Miller Diversion 165 TIG Welder Package (907626)","description":"The Miller Diversion 165 TIG Welder Package is Miller's most affordable and easy-to-use AC\/DC TIG machine that was designed specifically for the personal user.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eEasy-to-Understand Operator Interface\u003c\/strong\u003e\u003cbr\u003e\nIt's as easy as \"1, 2, 3\" to set your machine and start welding! 1. Power-up. 2. Select material type. 3. Set material thickness range.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003ePortable\u003c\/strong\u003e\u003cbr\u003e\nWhether it's in the shop, garage or at the race track, at 50 lbs it can be taken anywhere.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eReduce Noise, Maintenance and Operating Costs.\u003c\/strong\u003e\u003cbr\u003e\nOur Fan-On-Demand cooling system only operates when needed. This cuts down on fan noise and reduces power consumption and contaminants drawn into the machine.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFully Adjustable Amperage Setting\u003c\/strong\u003e\u003cbr\u003e\nThe full amperage range is available from 10-165 amps on both DC and AC output.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eUtilizes Latest Inverter Technology\u003c\/strong\u003e\u003cbr\u003e\nBy utilizing an inverter-based AC\/DC power source, a more efficient (less energy is used) and consistent welding arc are provided compared to older transformer based TIG machines.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eDependable Arc Starts\u003c\/strong\u003e\u003cbr\u003e\nProvides HF, non-contact arc starting to eliminate tungsten and material contamination time after time.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eEliminate Waste of Expensive Shielding Gas\u003c\/strong\u003e\u003cbr\u003e\nOur Auto-Postflow feature optimizes postflow time based on welding amperage. This allows for proper shielding of both the weld end zone and electrode every time without waste of gas or need for adjustment.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eBetter Control of Amperage When Welding Out-of Position\u003c\/strong\u003e\u003cbr\u003e\nThe package comes standard with the Weldcraft WP17 TIG Torch. \u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes complete with:\u003c\/u\u003e\u003cbr\u003e\n•Diversion 165 power source\u003cbr\u003e \n• 6 ft (1.8 m) primary cord (50 A, 230 V plug)\u003cbr\u003e \n• RFCS-RJ45 Remote Foot Control (Miller part number 300432)\u003cbr\u003e  \n• 12 ft (3.7 m) work lead with clamp\u003cbr\u003e   \n• Smith Argon regulator\/flow guage with hose\u003cbr\u003e\u003cbr\u003e   \n\n\u003cu\u003e12.5 ft (3.8 m) Weldcraft WP17 TIG torch with:\u003c\/u\u003e\u003cbr\u003e  \n• Back cap\u003cbr\u003e  \n• Ceramic gas cup\u003cbr\u003e  \n• 3\/32 in (2.4 mm) collet and collet body\u003cbr\u003e  \n• 2% ceriated tungsten\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439701512479,"sku":"IMIL20130135","price":1615.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907626.jpg?v=1692908037"},{"product_id":"hobart-ez-tig-165i-tig-welder-500551","title":"Hobart EZ-TIG 165i TIG Welder (500551)","description":"The Hobart EZ-TIG 165i TIG Welder (500551) is a complete 230 volt AC\/DC welding package that offers a unique single-knob control making it the quickest and easiest AC\/DC TIG Welder to set up and use. Just plug it into 230 VAC, connect the gas, select the material and thickness, and you are ready to weld. It has superior weld performance from 22 gauge to 3\/16 inch (.81mm to 4.8mm) in both AC (aluminum) and DC (steel\/stainless\/chromoly). The EZ-TIG 165i is a lightweight inverter\/based design that includes a foot control.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003cbr\u003e\n• EZ to use interface with one knob and one switch control\u003cbr\u003e\n• AC output for superior aluminum welding, DC output for mild and stainless steel\u003cbr\u003e\n• Fan-On-Demand to only have the fan run when needed reducing dust\/debris being pulled into the unit\u003cbr\u003e\n• Infinite amperage control for broader operating range with finer control\u003cbr\u003e\n• Inverter-based power source provides a more consistent welding arc while using less power\u003cbr\u003e\n• Weighs only 50 lb. (23 kg) so it's EZ to take anywhere\u003cbr\u003e\n• HF start to allow for a non-contact arc start to eliminate tungsten and material contamination\u003cbr\u003e\n• Auto-postflow to provide optimum shielding based on welding amperage without waste or need for adjustment\u003cbr\u003e\n• Automatic high temperature shutdown\u003cbr\u003e\u003cbr\u003e\n\n\u003cu\u003eComes Complete With:\u003c\/u\u003e\u003cbr\u003e\n• Inverter based power source with primary cord and plug attached\u003cbr\u003e\n• 12.5 ft (3.8 m) Legacy 17 Weldcraft TIG torch\u003cbr\u003e\n• Foot-operated control using the RFCS-RJ45 Remote Foot Control\u003cbr\u003e\n• 12 ft. (3.7 m) work cable with clamp\u003cbr\u003e\n• Gas regulator, flowmeter and shielding gas hose\u003cbr\u003e\n• 5\/3\/1 Industrial Warranty. Five year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); one year on guns (MIG and plasma torches)\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439707574559,"sku":"IHOB20140016","price":1325.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/500551_1.jpg?v=1692908078"},{"product_id":"miller-dynasty-210-tig-welder-auto-line-120-480v-with-cps-907816001","title":"Miller Dynasty 210 TIG Welder Auto-Line 120-480V with CPS (907816001)","description":"The Miller Dynasty 210 offers pulse on\/off, pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eNew Features\u003c\/strong\u003e\u003cbr\u003e\n• Memory Card Port - Easily update software \u0026amp; expand product features\u003cbr\u003e\n• Cooler Power Supply (CPS) - Integrated 120-volt dedicated use receptacle for the coolmate 1.3\u003cbr\u003e\n• Cooler-On-Demand - Feature operates the auxiliary cooling system only when needed\u003cbr\u003e\n• Pro-Set - Eliminates the guesswork when setting weld parameters\u003cbr\u003e\n• Standby \/ Power Switch \/ Sleep Time - Programmable feature will power down the machine if is sits idle for a specified time\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Process: AC\/DC TIG\/Stick\u003cbr\u003e\n• Input Power: 1 or 3 Phase (120-480V)\u003cbr\u003e\n• Amperage Range: 1-210 A\u003cbr\u003e\n• Material Thickness: .002 - 1\/4\" Steel  |  .012 - 1\/4\" Aluminum\u003cbr\u003e\n• Dimensions: 22.4\"L X 8.6\"W X 13.6\"H\u003cbr\u003e\n• Weight: 47 lbs\u003cbr\u003e\n• AC Balance: 50-99%\u003cbr\u003e\n• AC Frequency: 20-400 Hz\u003cbr\u003e\n• Pulse: Off - 500 PPS\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eWireless Remote Control Compatible\u003c\/strong\u003e\u003cbr\u003e\nImprove productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime\/repair costs and extend the operator's welding range without adding cord extensions.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eLift-Arc\u003c\/strong\u003e\u003cbr\u003e\nLift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eBlue Lightning - High Frequency Arc Starter\u003c\/strong\u003e\u003cbr\u003e\nFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eAuto-Line Power Management Technology\u003c\/strong\u003e\u003cbr\u003e\nAllows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eAC Waveforms\u003c\/strong\u003e\u003cbr\u003e\n• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e\n• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e\n• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e\n• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eAC and DC TIG Features\u003c\/strong\u003e\u003cbr\u003e\n• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e\n• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e\n• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eStick Features (AC\/DC)\u003c\/strong\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\n• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eComes Complete With:\u003c\/strong\u003e\u003cbr\u003e\n• Dynasty 210 power source with CPS\u003cbr\u003e \n• Quick Reference Guide: English | Spanish\u003cbr\u003e  \n• 8 ft (2.4 m) primary cord (No Plug)\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439726907679,"sku":"IMIL20150276","price":7223.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907816001.jpg?v=1692908252"},{"product_id":"miller-dynasty-210-tig-welder-auto-line-120-480v-907816","title":"Miller Dynasty 210 TIG Welder Auto Line 120-480V (907816)","description":"The Miller Dynasty 210 offers pulse on\/off, pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eNew Features\u003c\/strong\u003e\u003cbr\u003e\n• Memory Card Port - Easily update software \u0026amp; expand product features\u003cbr\u003e\n• \u003cstrong\u003eOptional\u003c\/strong\u003e Cooler Power Supply (CPS) - Integrated 120-volt dedicated use receptacle for the coolmate 1.3\u003cbr\u003e\n• Cooler-On-Demand - Feature operates the auxiliary cooling system only when needed\u003cbr\u003e\n• Pro-Set - Eliminates the guesswork when setting weld parameters\u003cbr\u003e\n• Standby \/ Power Switch \/ Sleep Time - Programmable feature will power down the machine if is sits idle for a specified time\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Process: AC\/DC TIG\/Stick\u003cbr\u003e\n• Input Power: 1 or 3 Phase (120-480V)\u003cbr\u003e\n• Amperage Range: 1-210 A\u003cbr\u003e\n• Material Thickness: .002 - 1\/4\" Steel  |  .012 - 1\/4\" Aluminum\u003cbr\u003e\n• Dimensions: 22.4\"L X 8.6\"W X 13.6\"H\u003cbr\u003e\n• Weight: 47 lbs\u003cbr\u003e\n• AC Balance: 50-99%\u003cbr\u003e\n• AC Frequency: 20-400 Hz\u003cbr\u003e\n• Pulse: Off - 500 PPS\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eWireless Remote Control Compatible\u003c\/strong\u003e\u003cbr\u003e\nImprove productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime\/repair costs and extend the operator's welding range without adding cord extensions.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eLift-Arc\u003c\/strong\u003e\u003cbr\u003e\nLift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eBlue Lightning - High Frequency Arc Starter\u003c\/strong\u003e\u003cbr\u003e\nFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eAuto-Line Power Management Technology\u003c\/strong\u003e\u003cbr\u003e\nAllows for any input voltage hookup (115-480 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eAC Waveforms\u003c\/strong\u003e\u003cbr\u003e\n• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e\n• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e\n• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e\n• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eAC and DC TIG Features\u003c\/strong\u003e\u003cbr\u003e\n• Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e\n• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e\n• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eStick Features (AC\/DC)\u003c\/strong\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e\n• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eComes Complete With:\u003c\/strong\u003e\u003cbr\u003e\n• Dynasty 210 power source\u003cbr\u003e \n• Quick Reference Guide: English | Spanish\u003cbr\u003e  \n• 8 ft (2.4 m) primary cord (No Plug)\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439743914271,"sku":"IMIL20150275","price":6936.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907816001_1.jpg?v=1692908373"},{"product_id":"miller-dynasty-300-cv-multiprocess-welder-w-cps-907819","title":"Miller Dynasty 300 CV Multiprocess Welder w\/CPS (907819)","description":"The Dynasty 300  with CV and CPS welder offers multiprocess capabilities and features like Auto-Line, AC TIG, pulse and high-frequency arc starts.  The Dynasty 300 weighs just 55 pounds making it the most versatile, portable machine in its class. \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eThe primary purpose of the Dynasty 300 with CV is so that the unit may be paired up with a Suitcase Feeder such as the ArcReach 8 or 12 and used for high-output wire feeding (MIG).\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e  \n\n\u003cstrong\u003eProcesses\u003c\/strong\u003e\u003cbr\u003e\n• AC\/DC TIG\u003cbr\u003e\n• Pulsed TIG\u003cbr\u003e\n• Stick\u003cbr\u003e\n• Air Carbon Arc\u003cbr\u003e\n• MIG \u003cstrong\u003e(With Paired Suitcase Feeder, Not Included)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Line (208-600V Hookup)\u003cbr\u003e\n• Software Updates through USB Port\u003cbr\u003e\n• Blue-Lightning High Frequency Arc Start\u003cbr\u003e\n• Digital Meters\u003cbr\u003e\n• Fan-On-Demand\u003cbr\u003e\n• Cooler-On-Demand\u003cbr\u003e\n• Wind Tunnel Technology\u003cbr\u003e\n• Pro-Set Parameters\u003cbr\u003e\n• Sleep Timer Conserves Power\u003cbr\u003e\n• Cooler Power Supply (CPS) 120V Receptacle\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Voltage: 208-600V | 1 or 3 Phase\u003cbr\u003e\n• Amperage Range: 2-300A AC | 1-300A DC\u003cbr\u003e\n• Duty Cycle (3-Phase): 60% @ 250A \u003cbr\u003e\n• AC Material Thickness: 0.012-3\/8\"\u003cbr\u003e\n• Weight: 55lbs \u003cbr\u003e\n• Max Stick Electrode Size: 1\/4\" 6010 | 7\/32\" 7018 | 3\/16\" 7024\u003cbr\u003e\n• Generator Requirement: 12.5 KW\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003e\n• Dynasty 300 Power Source\u003cbr\u003e\n• (2) 50mm Dinse Connectors\u003cbr\u003e\n• 8 Foot Power Cord (No Plug)\u003cbr\u003e\n• User Manual\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439769702687,"sku":"IMIL20180009","price":12080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907819.jpg?v=1692908594"},{"product_id":"miller-dynasty-210-tig-welder-120-480v-907685","title":"Miller Dynasty 210 Tig Welder 120-480V (907685)","description":"The Miller Dynasty 210 base model offers essential TIG and stick functions while providing an operator-friendly menu.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eNew Features\u003c\/strong\u003e\u003cbr\u003e\n• Memory Card Port - Easily update software \u0026amp; expand product features\u003cbr\u003e\n• Pro-Set - Eliminates the guesswork when setting weld parameters\u003cbr\u003e\n• Standby \/ Power Switch \/ Sleep Time - Programmable feature will power down the machine if is sits idle for a specified time\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Process: AC\/DC TIG\/Stick\u003cbr\u003e\n• Input Power: 1 or 3 Phase (120-480V)\u003cbr\u003e\n• Amperage Range: 1-210 A\u003cbr\u003e\n• Material Thickness: .002 - 1\/4\" Steel  |  .012 - 1\/4\" Aluminum\u003cbr\u003e\n• Dimensions: 22.4\"L X 8.6\"W X 13.6\"H\u003cbr\u003e\n• Weight: 47 lbs\u003cbr\u003e\n• AC Tig Parameters: 60-80% Balance | 70-150 Hz | \u003cbr\u003e\n• DC Tig Parameters: 0-250 PPS Pulse \u003cbr\u003e\n• Stick Parameters: 5-210A | 0-100% Dig\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eWireless Remote Control Compatible\u003c\/strong\u003e\u003cbr\u003e\nImprove productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime\/repair costs and extend the operator's welding range without adding cord extensions.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eLift-Arc\u003c\/strong\u003e\u003cbr\u003e\nLift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eBlue Lightning - High Frequency Arc Starter\u003c\/strong\u003e\u003cbr\u003e\nFor TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eAuto-Line Power Management Technology\u003c\/strong\u003e\u003cbr\u003e\nAllows for any input voltage hookup (115-480 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eAC Waveforms\u003c\/strong\u003e\u003cbr\u003e\n• Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e\n• Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e\n• Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e\n• Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eAC and DC TIG Features\u003c\/strong\u003e\u003cbr\u003e\n• AC balance (60-80%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e\n• AC frequency (70-150 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e\n• DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eStick Features (AC\/DC)\u003c\/strong\u003e\u003cbr\u003e\n• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e\n• Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e\n• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eComes Complete With:\u003c\/strong\u003e\u003cbr\u003e\n• Dynasty 210 Power Source\u003cbr\u003e \n• Quick Reference Guide: English | Spanish\u003cbr\u003e  \n• 8 ft (2.4 m) primary cord (No Plug)\u003cbr\u003e  \n• (2) Dinse 50 mm connectors\u003cbr\u003e  \n• Adjustable shoulder strap\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439771439391,"sku":"IMIL20180015","price":7573.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907685.jpg?v=1692908615"},{"product_id":"miller-syncrowave-400-ac-dc-tig-and-stick-welder-complete-w-wired-foot-control-951831","title":"Miller Syncrowave 400 AC\/DC TIG and Stick Welder Complete w\/Wired Foot Control (951831)","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/products\/miller-syncrowave-400-ac-dc-tig-and-stick-welder-complete-w-wireless-foot-control-951873?_pos=3\u0026amp;_sid=196951917\u0026amp;_ss=r\"\u003e\u003cstrong\u003eThis package has been replaced by the Syncrowave 400 w\/wireless foot control (951873).\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Miller Syncrowave 400 offers single or three phase power and features a 30% duty cycle at 400 amps. This machine comes with Auto-Link technology that automatically links the power source to primary voltage being applied (208\/240\/480). The AC squarewave welding current of the Syncrowave 400 automatically removes the layer of oxide which is necessary for producing high-quality aluminum welds. The Syncrowave 400 compensates for power fluctuation without changing your welding parameters - line voltage compensation works on fluctuating power +-10 percent. Miller's fan-on-demand technology operates the power source only when needed, reducing noise and energy use. The Syncrowave 400 comes with an Arc Timer\/Cycle Counter that records actual welding time and number of arc starts, which is great for estimating job costs. \u003cbr\u003e\u003cbr\u003eThe Syncrowave 400 is easy to use - the intuitive user interface is simple to understand, making it easy to adjust parameters, and means less time training new employees. The Pro-Set button gets to factory preset parameters with one touch of a button. The AC balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds, the AC balance can be adjusted from 60-80%, and the Pro-Set is defaulted to 68%.. The Syncrowave 400 comes with Pulsed TIG, which can increase puddle agitation, arc stability, and travel speeds while reducing heat input and distortion. This welder comes with DIG control that allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like 7018, and increase the DIG setting for stiffer, more penetrating electrodes like 6010. The Syncrowave 400 also offers Hot Start which is an adaptive control that provides positive arc starts without sticking. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Auto-Link\u003cbr\u003e• AC Balance Control\u003cbr\u003e• Blue Lightning HF Arc Starts\u003cbr\u003e• Lift-Arc Start\u003cbr\u003e• Auto-Postflow\u003cbr\u003e• Pro-Set\u003cbr\u003e• Arc Timer\/Cycle Counter\u003cbr\u003e• Line Voltage Compensation\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e• Input Power: 208\/240\/480 V | 1 or 3-Phase Power\u003cbr\u003e• Amperage Range: 5-400 Amps\u003cbr\u003e• Thickness Capability: 1\/2\" Steel | 3\/8\" Aluminum\u003cbr\u003e• Duty Cycle: 30% @ 300A | 60% @ 210A\u003cbr\u003e• Weight: 131 lbs (Power Source) | 211 lbs (With Cooler\/Cart)\u003cbr\u003e• Dimensions: 29.4\" H x 15\" W x 24.6\" D (Power Source) | 43.9\" H x 20.5\" W x 36.3\" D (With Cooler\/Cart)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eComes Complete With\u003c\/strong\u003e\u003cbr\u003e• Syncrowave 400 Power Source\u003cbr\u003e• 8 Foot Power Cord (No Plug)\u003cbr\u003e• Running Gear\u003cbr\u003e• Coolmate 3S Cooler\u003cbr\u003e• Weldcraft W-375 TIG Torch Kit\u003cbr\u003e• 20 Ft Wired Foot Control\u003cbr\u003e• Flowmeter\/Regulator | Gas Hose | TIG Torch Connector\u003cbr\u003e• Work Clamp with Cable and Dinse Connector\u003cbr\u003e• 4 Gallons of Coolant\u003cbr\u003e• Owner's Manual\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439800733983,"sku":"IMIL20200032","price":14823.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951831_1.jpg?v=1692908871"},{"product_id":"miller-syncrowave-400-ac-dc-tig-and-stick-welder-complete-w-wireless-foot-control-951873","title":"Miller Syncrowave 400 AC\/DC TIG and Stick Welder Complete w\/Wireless Foot Control (951873)","description":"The Miller Syncrowave 400 offers single or three phase power and features a 30% duty cycle at 400 amps.  This machine comes with Auto-Link technology that automatically links the power source to primary voltage being applied (208\/240\/480).  The AC squarewave welding current of the Syncrowave 400 automatically removes the layer of oxide which is necessary for producing high-quality aluminum welds.  The Syncrowave 400 compensates for power fluctuation without changing your welding parameters - line voltage compensation works on fluctuating power +-10 percent.  Miller's fan-on-demand technology operates the power source only when needed, reducing noise and energy use.  The Syncrowave 400 comes with an Arc Timer\/Cycle Counter that records actual welding time and number of arc starts, which is great for estimating job costs.  \u003cbr\u003e\u003cbr\u003e\n\nThe Syncrowave 400 is easy to use - the intuitive user interface is simple to understand, making it easy to adjust parameters, and means less time training new employees.  The Pro-Set button gets to factory preset parameters with one touch of a button.  The AC balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds, the AC balance can be adjusted from 60-80%, and the Pro-Set is defaulted to 68%..  The Syncrowave 400 comes with Pulsed TIG, which can increase puddle agitation, arc stability, and travel speeds while reducing heat input and distortion.   This welder comes with DIG control that allows the arc characteristics to be changed for specific applications and electrodes.  Lower the DIG setting for smooth running electrodes like 7018, and increase the DIG setting for stiffer, more penetrating electrodes like 6010.  The Syncrowave 400 also offers Hot Start which is an adaptive control that provides positive arc starts without sticking.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Link\u003cbr\u003e\n• AC Balance Control\u003cbr\u003e\n• Blue Lightning HF Arc Starts\u003cbr\u003e\n• Lift-Arc Start\u003cbr\u003e\n• Auto-Postflow\u003cbr\u003e\n• Pro-Set\u003cbr\u003e\n• Arc Timer\/Cycle Counter\u003cbr\u003e\n• Line Voltage Compensation\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Input Power:  208\/240\/480 V | 1 or 3-Phase Power\u003cbr\u003e\n• Amperage Range:  5-400 Amps\u003cbr\u003e\n• Thickness Capability:  1\/2\" Steel | 3\/8\" Aluminum\u003cbr\u003e\n• Duty Cycle:  30% @ 300A | 60% @ 210A\u003cbr\u003e\n• Weight:  131 lbs (Power Source) | 211 lbs (With Cooler\/Cart)\u003cbr\u003e\n• Dimensions:  29.4\" H x 15\" W x 24.6\" D (Power Source) | 43.9\" H x 20.5\" W x 36.3\" D (With Cooler\/Cart)\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eComes Complete With\u003c\/strong\u003e\u003cbr\u003e\n• Syncrowave 400 Power Source\u003cbr\u003e\n• 8 Foot Power Cord (No Plug)\u003cbr\u003e\n• Running Gear\u003cbr\u003e\n• Coolmate 3S Cooler\u003cbr\u003e\n• Weldcraft W-375 TIG Torch Kit\u003cbr\u003e\n• Wireless Foot Control\u003cbr\u003e\n• Flowmeter\/Regulator | Gas Hose | TIG Torch Connector\u003cbr\u003e\n• Work Clamp with Cable and Dinse Connector\u003cbr\u003e\n• 4 Gallons of Coolant\u003cbr\u003e\n• Owner's Manual\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439806370079,"sku":"IMIL20200033","price":18168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951873.jpg?v=1692908926"},{"product_id":"miller-dynasty-300-cv-multiprocess-welder-w-cps-tigrunner-907819001","title":"Miller Dynasty 300 CV Multiprocess Welder w\/CPS TIGRunner (907819001)","description":"The Dynasty 300  with CV and CPS welder offers multiprocess capabilities and features like Auto-Line, AC TIG, pulse and high-frequency arc starts.  The Dynasty 300 weighs just 55 pounds making it the most versatile, portable machine in its class. \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eThe primary purpose of the Dynasty 300 with CV is so that the unit may be paired up with a Suitcase Feeder such as the ArcReach 8 or 12 and used for high-output wire feeding (MIG).\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e  \n\n\u003cstrong\u003eProcesses\u003c\/strong\u003e\u003cbr\u003e\n• AC\/DC TIG\u003cbr\u003e\n• Pulsed TIG\u003cbr\u003e\n• Stick\u003cbr\u003e\n• Air Carbon Arc\u003cbr\u003e\n• MIG \u003cstrong\u003e(With Paired Suitcase Feeder, Not Included)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Line (208-600V Hookup)\u003cbr\u003e\n• Software Updates through USB Port\u003cbr\u003e\n• Blue-Lightning High Frequency Arc Start\u003cbr\u003e\n• Digital Meters\u003cbr\u003e\n• Fan-On-Demand\u003cbr\u003e\n• Cooler-On-Demand\u003cbr\u003e\n• Wind Tunnel Technology\u003cbr\u003e\n• Pro-Set Parameters\u003cbr\u003e\n• Sleep Timer Conserves Power\u003cbr\u003e\n• Cooler Power Supply (CPS) 120V Receptacle\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Voltage: 208-600V | 1 or 3 Phase\u003cbr\u003e\n• Amperage Range: 2-300A AC | 1-300A DC\u003cbr\u003e\n• Duty Cycle (3-Phase): 60% @ 250A \u003cbr\u003e\n• AC Material Thickness: 0.012-3\/8\"\u003cbr\u003e\n• Weight: 55lbs \u003cbr\u003e\n• Max Stick Electrode Size: 1\/4\" 6010 | 7\/32\" 7018 | 3\/16\" 7024\u003cbr\u003e\n• Generator Requirement: 12.5 KW\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003e\n• Dynasty 300 Power Source\u003cbr\u003e\n• Coolmate 1.3 Cooler\u003cbr\u003e\n• Small Runner Cart\u003cbr\u003e\n• (2) 50mm Dinse Connectors\u003cbr\u003e\n• 8 Foot Power Cord (No Plug)\u003cbr\u003e\n• User Manual\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439812989215,"sku":"IMIL20220040","price":14314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907819001.jpg?v=1692908989"},{"product_id":"miller-dynasty-300-cv-multiprocess-welder-fully-loaded-wireless-pkg-951000100","title":"Miller Dynasty 300 CV Multiprocess Welder Fully Loaded Wireless Pkg (951000100)","description":"The Dynasty 300  with CV and CPS welder offers multiprocess capabilities and features like Auto-Line, AC TIG, pulse and high-frequency arc starts.  The Dynasty 300 weighs just 55 pounds making it the most versatile, portable machine in its class. \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eThe primary purpose of the Dynasty 300 with CV is so that the unit may be paired up with a Suitcase Feeder such as the ArcReach 8 or 12 and used for high-output wire feeding (MIG).\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e  \n\n\u003cstrong\u003eProcesses\u003c\/strong\u003e\u003cbr\u003e\n• AC\/DC TIG\u003cbr\u003e\n• Pulsed TIG\u003cbr\u003e\n• Stick\u003cbr\u003e\n• Air Carbon Arc\u003cbr\u003e\n• MIG \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Line (208-600V Hookup)\u003cbr\u003e\n• Software Updates through USB Port\u003cbr\u003e\n• Blue-Lightning High Frequency Arc Start\u003cbr\u003e\n• Digital Meters\u003cbr\u003e\n• Fan-On-Demand\u003cbr\u003e\n• Cooler-On-Demand\u003cbr\u003e\n• Wind Tunnel Technology\u003cbr\u003e\n• Pro-Set Parameters\u003cbr\u003e\n• Sleep Timer Conserves Power\u003cbr\u003e\n• Cooler Power Supply (CPS) 120V Receptacle\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Voltage: 208-600V | 1 or 3 Phase\u003cbr\u003e\n• Amperage Range: 2-300A AC | 1-300A DC\u003cbr\u003e\n• Duty Cycle (3-Phase): 60% @ 250A \u003cbr\u003e\n• AC Material Thickness: 0.012-3\/8\"\u003cbr\u003e\n• Weight: 55lbs \u003cbr\u003e\n• Max Stick Electrode Size: 1\/4\" 6010 | 7\/32\" 7018 | 3\/16\" 7024\u003cbr\u003e\n• Generator Requirement: 12.5 KW\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003e\n• Dynasty 300 Power Source\u003cbr\u003e\n• Coolmate 1.3 Cooler\u003cbr\u003e\n• Small Runner Cart\u003cbr\u003e\n• ArcReach 12 Feeder w\/Bernard Gun\u003cbr\u003e\n• (2) 50mm Dinse Connectors\u003cbr\u003e\n• 8 Foot Power Cord (No Plug)\u003cbr\u003e\n• User Manual\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439813021983,"sku":"IMIL20220041","price":22053.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951940.jpg?v=1692908990"},{"product_id":"miller-syncrowave-400-ac-dc-tig-and-stick-welder-tigrunner-pkg-907783001","title":"Miller Syncrowave 400 AC\/DC TIG and Stick Welder Tigrunner Pkg (907783001)","description":"The Miller Syncrowave 400 offers single or three phase power and features a 30% duty cycle at 400 amps.  This machine comes with Auto-Link technology that automatically links the power source to primary voltage being applied (208\/240\/480).  The AC squarewave welding current of the Syncrowave 400 automatically removes the layer of oxide which is necessary for producing high-quality aluminum welds.  The Syncrowave 400 compensates for power fluctuation without changing your welding parameters - line voltage compensation works on fluctuating power +-10 percent.  Miller's fan-on-demand technology operates the power source only when needed, reducing noise and energy use.  The Syncrowave 400 comes with an Arc Timer\/Cycle Counter that records actual welding time and number of arc starts, which is great for estimating job costs.  \u003cbr\u003e\u003cbr\u003e\n\nThe Syncrowave 400 is easy to use - the intuitive user interface is simple to understand, making it easy to adjust parameters, and means less time training new employees.  The Pro-Set button gets to factory preset parameters with one touch of a button.  The AC balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds, the AC balance can be adjusted from 60-80%, and the Pro-Set is defaulted to 68%..  The Syncrowave 400 comes with Pulsed TIG, which can increase puddle agitation, arc stability, and travel speeds while reducing heat input and distortion.   This welder comes with DIG control that allows the arc characteristics to be changed for specific applications and electrodes.  Lower the DIG setting for smooth running electrodes like 7018, and increase the DIG setting for stiffer, more penetrating electrodes like 6010.  The Syncrowave 400 also offers Hot Start which is an adaptive control that provides positive arc starts without sticking.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Link\u003cbr\u003e\n• AC Balance Control\u003cbr\u003e\n• Blue Lightning HF Arc Starts\u003cbr\u003e\n• Lift-Arc Start\u003cbr\u003e\n• Auto-Postflow\u003cbr\u003e\n• Pro-Set\u003cbr\u003e\n• Arc Timer\/Cycle Counter\u003cbr\u003e\n• Line Voltage Compensation\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Input Power:  208\/240\/480 V | 1 or 3-Phase Power\u003cbr\u003e\n• Amperage Range:  5-400 Amps\u003cbr\u003e\n• Thickness Capability:  1\/2\" Steel | 3\/8\" Aluminum\u003cbr\u003e\n• Duty Cycle:  30% @ 300A | 60% @ 210A\u003cbr\u003e\n• Weight:  131 lbs (Power Source) | 211 lbs (With Cooler\/Cart)\u003cbr\u003e\n• Dimensions:  29.4\" H x 15\" W x 24.6\" D (Power Source) | 43.9\" H x 20.5\" W x 36.3\" D (With Cooler\/Cart)\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eComes Complete With\u003c\/strong\u003e\u003cbr\u003e\n• Syncrowave 400 Power Source\u003cbr\u003e\n• 8 Foot Power Cord (No Plug)\u003cbr\u003e\n• Running Gear\u003cbr\u003e\n• Coolmate 3S Cooler\u003cbr\u003e\n• 2 Dinse Connectors\u003cbr\u003e\n• Owner's Manual\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439813218591,"sku":"IMIL20200031","price":16218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907783001_1.jpg?v=1692908991"},{"product_id":"miller-syncrowave-400-ac-dc-tig-and-stick-welder-complete-w-wired-foot-control-951000004","title":"Miller Syncrowave 400 AC\/DC TIG and Stick Welder Complete w\/Wired Foot Control (951000004)","description":"The Miller Syncrowave 400 offers single or three phase power and features a 30% duty cycle at 400 amps.  This machine comes with Auto-Link technology that automatically links the power source to primary voltage being applied (208\/240\/480).  The AC squarewave welding current of the Syncrowave 400 automatically removes the layer of oxide which is necessary for producing high-quality aluminum welds.  The Syncrowave 400 compensates for power fluctuation without changing your welding parameters - line voltage compensation works on fluctuating power +-10 percent.  Miller's fan-on-demand technology operates the power source only when needed, reducing noise and energy use.  The Syncrowave 400 comes with an Arc Timer\/Cycle Counter that records actual welding time and number of arc starts, which is great for estimating job costs.  \u003cbr\u003e\u003cbr\u003e\n\nThe Syncrowave 400 is easy to use - the intuitive user interface is simple to understand, making it easy to adjust parameters, and means less time training new employees.  The Pro-Set button gets to factory preset parameters with one touch of a button.  The AC balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds, the AC balance can be adjusted from 60-80%, and the Pro-Set is defaulted to 68%..  The Syncrowave 400 comes with Pulsed TIG, which can increase puddle agitation, arc stability, and travel speeds while reducing heat input and distortion.   This welder comes with DIG control that allows the arc characteristics to be changed for specific applications and electrodes.  Lower the DIG setting for smooth running electrodes like 7018, and increase the DIG setting for stiffer, more penetrating electrodes like 6010.  The Syncrowave 400 also offers Hot Start which is an adaptive control that provides positive arc starts without sticking.  \u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n• Auto-Link\u003cbr\u003e\n• AC Balance Control\u003cbr\u003e\n• Blue Lightning HF Arc Starts\u003cbr\u003e\n• Lift-Arc Start\u003cbr\u003e\n• Auto-Postflow\u003cbr\u003e\n• Pro-Set\u003cbr\u003e\n• Arc Timer\/Cycle Counter\u003cbr\u003e\n• Line Voltage Compensation\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e\n• Input Power:  208\/240\/480 V | 1 or 3-Phase Power\u003cbr\u003e\n• Amperage Range:  5-400 Amps\u003cbr\u003e\n• Thickness Capability:  1\/2\" Steel | 3\/8\" Aluminum\u003cbr\u003e\n• Duty Cycle:  30% @ 300A | 60% @ 210A\u003cbr\u003e\n• Weight:  131 lbs (Power Source) | 211 lbs (With Cooler\/Cart)\u003cbr\u003e\n• Dimensions:  29.4\" H x 15\" W x 24.6\" D (Power Source) | 43.9\" H x 20.5\" W x 36.3\" D (With Cooler\/Cart)\u003cbr\u003e\u003cbr\u003e\n\n\u003cstrong\u003eComes Complete With\u003c\/strong\u003e\u003cbr\u003e\n• Syncrowave 400 Power Source\u003cbr\u003e\n• 8 Foot Power Cord (No Plug)\u003cbr\u003e\n• Running Gear\u003cbr\u003e\n• Coolmate 3S Cooler\u003cbr\u003e\n• Weldcraft W-375 TIG Torch Kit\u003cbr\u003e\n• 20 Ft Wired Foot Control\u003cbr\u003e\n• Flowmeter\/Regulator | Gas Hose | TIG Torch Connector\u003cbr\u003e\n• Work Clamp with Cable and Dinse Connector\u003cbr\u003e\n• 4 Gallons of Coolant\u003cbr\u003e\n• Owner's Manual\u003cbr\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439830487327,"sku":"IMIL20200032","price":17519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951831_1_cd6206a5-9ec8-4ff4-b764-46016f6983ec.jpg?v=1692909125"},{"product_id":"miller-dynasty-210-tigrunner-907816002","title":"Miller Dynasty 210 TigRunner (907816002)","description":"\u003cp\u003eThe Miller Dynasty 210 offers pulse on\/off, pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNew Features\u003c\/strong\u003e\u003cbr\u003e • Memory Card Port - Easily update software \u0026amp; expand product features\u003cbr\u003e • Cooler Power Supply (CPS) - Integrated 120-volt dedicated use receptacle for the coolmate 1.3\u003cbr\u003e • Cooler-On-Demand - Feature operates the auxiliary cooling system only when needed\u003cbr\u003e • Pro-Set - Eliminates the guesswork when setting weld parameters\u003cbr\u003e • Standby \/ Power Switch \/ Sleep Time - Programmable feature will power down the machine if is sits idle for a specified time\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e • Process: AC\/DC TIG\/Stick\u003cbr\u003e • Input Power: 1 or 3 Phase (120-480V)\u003cbr\u003e • Amperage Range: 1-210 A\u003cbr\u003e • Material Thickness: .002 - 1\/4\" Steel | .012 - 1\/4\" Aluminum\u003cbr\u003e • Dimensions: 22.4\"L X 8.6\"W X 13.6\"H\u003cbr\u003e • Weight: 47 lbs\u003cbr\u003e • AC Balance: 50-99%\u003cbr\u003e • AC Frequency: 20-400 Hz\u003cbr\u003e • Pulse: Off - 500 PPS\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eWireless Remote Control Compatible\u003c\/strong\u003e\u003cbr\u003e Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime\/repair costs and extend the operator's welding range without adding cord extensions.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eLift-Arc\u003c\/strong\u003e\u003cbr\u003e Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eBlue Lightning - High Frequency Arc Starter\u003c\/strong\u003e\u003cbr\u003e For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAuto-Line Power Management Technology\u003c\/strong\u003e\u003cbr\u003e Allows for any input voltage hookup (115-480 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAC Waveforms\u003c\/strong\u003e\u003cbr\u003e • Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.\u003cbr\u003e • Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.\u003cbr\u003e • Sine wave is for customers that like a traditional arc. It is quiet with good wetting.\u003cbr\u003e • Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAC and DC TIG Features\u003c\/strong\u003e\u003cbr\u003e • Extended AC balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.\u003cbr\u003e • AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.\u003cbr\u003e • DC TIG provides exceptionally smooth and precise arc for welding exotic materials.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStick Features (AC\/DC)\u003c\/strong\u003e\u003cbr\u003e • Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.\u003cbr\u003e • Hot Start adaptive control provides positive arc starts without sticking.\u003cbr\u003e • AC frequency control adds additional stability when Stick welding in AC for smoother welds.\u003cbr\u003e • Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eComes Complete With\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDynasty 210 power source with CPS \u003cbr data-mce-fragment=\"1\"\u003eCoolmate 1.3 \u003cbr data-mce-fragment=\"1\"\u003eSmall Runner Cart (301318)\u003cbr data-mce-fragment=\"1\"\u003e8 ft (2.4 m) primary cord (No Plug)\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":46439834812703,"sku":"IMIL20230039","price":8906.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907816002.jpg?v=1724698665"},{"product_id":"miller-xmt-400-arcreach-multiprocess-welder-907865","title":"Miller XMT 400 ArcReach Multiprocess Welder (907865)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 400 models come equipped with ArcReach technology which eliminates time spent tracing cables back to the power source to make adjustments. These welders are the most popular due to the flexibility with multiple ArcReach capable accessories.  These units come with Tweco Style connections, but can also be field changed over to dinse connections.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Cable Length Compensation (CLC)\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCable Length Compensation\u003c\/strong\u003e automatically adjusts output at the power source to account for voltage drop due to long weld cables.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":49348648239391,"sku":"IMIL20240047","price":7729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907865XMT400ArcReach.jpg?v=1734543111"},{"product_id":"miller-xmt-400-arcreach-multiprocess-welder-w-stick-tig-remote-951000114","title":"Miller XMT 400 ArcReach Multiprocess Welder w\/Stick\/Tig Remote (951000114)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 400 models come equipped with ArcReach technology which eliminates time spent tracing cables back to the power source to make adjustments.  These welders are the most popular due to the flexibility with multiple ArcReach capable accessories.  These units come with Tweco Style connections, but can also be field changed over to dinse connections.\u003c\/p\u003e\n\u003cp\u003eThe Stick\/TIG remote allows you to change weld settings at your work area, saving a trip to the power supply.  No extra control cord to purchase, maintain, string or unstring.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Cable Length Compensation (CLC)\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCable Length Compensation\u003c\/strong\u003e automatically adjusts output at the power source to account for voltage drop due to long weld cables.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":49350339133727,"sku":"IMIL20240048","price":9787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951000114_XMT_400_ArcReach_with_ArcReach_Stick-TIG_Remote.jpg?v=1726589220"},{"product_id":"miller-xmt-400-arcreach-multiprocess-welder-rmd-pulse-system-951000112","title":"Miller XMT 400 ArcReach Multiprocess Welder RMD\/Pulse System (951000112)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 400 models come equipped with ArcReach technology which eliminates time spent tracing cables back to the power source to make adjustments.  These welders are the most popular due to the flexibility with multiple ArcReach capable accessories.  These units come with Tweco Style connections, but can also be field changed over to dinse connections.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRMD\/Pulse system\u003c\/strong\u003e includes an ArcReach Smart Feeder with drive rolls and Bernard PipeWorx 300-15 MIG gun.  This package offers traditional MIG and flux-cored processes, as well as advanced RMD and pulse programs.  Allows operators to weld up to 200 feet away from the power source without any additional cables.  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Cable Length Compensation (CLC)\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCable Length Compensation\u003c\/strong\u003e automatically adjusts output at the power source to account for voltage drop due to long weld cables.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":49350572736799,"sku":"IMIL20240049","price":18083.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951000112_XMT_400_ArcReach_and_ArcReach_Smart_Feeder_with_PipeWorx_Gun.jpg?v=1726589201"},{"product_id":"miller-xmt-400-arcreach-multiprocess-welder-mig-flux-cored-system-951000113","title":"Miller XMT 400 ArcReach Multiprocess Welder MIG\/Flux-Cored System (951000113)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 400 models come equipped with ArcReach technology which eliminates time spent tracing cables back to the power source to make adjustments.  These welders are the most popular due to the flexibility with multiple ArcReach capable accessories.  These units come with Tweco Style connections, but can also be field changed over to dinse connections.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e MIG\/Flux-Cored system\u003c\/strong\u003e includes an ArcReach Suitcase 12 Feeder with drive rolls and Bernard BTB 300A MIG gun.  This package offers traditional MIG and flux-cored processes without any control cords necessary.   The XMT automatically changes to CV output when feeder is connected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Cable Length Compensation (CLC)\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCable Length Compensation\u003c\/strong\u003e automatically adjusts output at the power source to account for voltage drop due to long weld cables.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":49350781862175,"sku":"IMIL20240050","price":12717.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951000113_XMT_400_ArcReach_and_ArcReach_SuitCase_12_with_BTB_Gun.jpg?v=1726591404"},{"product_id":"miller-xmt-400-arcreach-multiprocess-welder-4-pack-fused-460-575v-907882","title":"Miller XMT 400 ArcReach Multiprocess Welder 4-Pack Fused 460\/575V (907882)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 400 models come equipped with ArcReach technology which eliminates time spent tracing cables back to the power source to make adjustments.  These welders are the most popular due to the flexibility with multiple ArcReach capable accessories.  These units come with Tweco Style connections, but can also be field changed over to dinse connections.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e 4-Pack Fused system\u003c\/strong\u003e includes 4 XMT units fused into 1 rack for larger industrial needs.  All weld cables or ArcReach accessories sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Cable Length Compensation (CLC)\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCable Length Compensation\u003c\/strong\u003e automatically adjusts output at the power source to account for voltage drop due to long weld cables.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":49350872006943,"sku":"IMIL20240051","price":39657.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907882_XMT_400_ArcReach_4-Pack_Rack.jpg?v=1726591927"},{"product_id":"miller-xmt-400-arcreach-multiprocess-welder-6-pack-fused-460-575v-907883","title":"Miller XMT 400 ArcReach Multiprocess Welder 6-Pack Fused 460\/575V (907883)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. The XMT 400 models come equipped with ArcReach technology which eliminates time spent tracing cables back to the power source to make adjustments.  These welders are the most popular due to the flexibility with multiple ArcReach capable accessories.  These units come with Tweco Style connections, but can also be field changed over to dinse connections.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e 6-Pack Fused system\u003c\/strong\u003e includes 6 XMT units fused into 1 rack for larger industrial needs.  All weld cables or ArcReach accessories sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Cable Length Compensation (CLC)\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCable Length Compensation\u003c\/strong\u003e automatically adjusts output at the power source to account for voltage drop due to long weld cables.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":49350959989023,"sku":"IMIL20240052","price":57363.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907883_XMT_400_ArcReach_6-pack_Rack.jpg?v=1726592207"},{"product_id":"miller-xmt-400-migrunner-w-intellx-basic-feeder-951971","title":"Miller XMT 400 MIGRunner w\/Intellx Basic Feeder (951971)","description":"\u003cp\u003eThe XMT 400 with Intellx feeders offer scalable solutions with dedicated wire feeder options.  The Intellx basic feeder with arc control means welders can produce better welds with minimal parameter adjustments.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese XMT 400 systems do not have ArcReach technology, rather they use ArcConnect cables so these systems are designed for fab shops and manufacturing.  If you need an XMT 400 with ArcReach for field work using an ArcReach feeder, you can view those machines \u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/search?q=xmt+400+arcreach\u0026amp;type=product\"\u003ehere\u003c\/a\u003e.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Auto Remote Sense\u003cbr\u003e• Dinse Style Weld Disconnects\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntellx Basic Features\u003c\/strong\u003e\u003cbr\u003e• Digital Meters\u003cbr\u003e• Remote Voltage \u003cbr\u003e• Wire Feed Speed\u003cbr\u003e• Arc Control\u003cbr\u003e• Trigger Hold\u003cbr\u003e• Wire Jog and Purge\u003cbr\u003e• Wire Feed Speed Feedback\u003cbr\u003e• Four Drive Rolls\u003cbr\u003e• Rotatable Drive\u003cbr\u003e• Up to 60lb Spool\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Power Source Weight: 75 lbs\u003cbr\u003e• Power Source Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003cbr\u003e\u003c\/strong\u003e• XMT 400 with Dinse Connectors (907881)\u003cbr\u003e• Intellx Basic Single Feeder (951783001)\u003cbr\u003e• 15 ft 400A Bernard MIG Gun\u003cbr\u003e• MIGRunner Cart (195445)\u003cbr\u003e• .035\/.045 V-Groove Drive Rolls (227061)\u003cbr\u003e• Regulator and 3 ft Gas Hose\u003cbr\u003e• 10 ft 4\/0 Work Cable and Clamp\u003cbr\u003e• 5 ft ArcConnect Control Cable\u003cbr\u003e• 6 ft 4\/0 Weld Cable from Feeder to Power Source\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":51219728204063,"sku":"IMIL20250089","price":13574.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951971.jpg?v=1757605232"},{"product_id":"miller-xmt-400-migrunner-w-intellx-pro-feeder-951000212","title":"Miller XMT 400 MIGRunner w\/Intellx Pro Feeder (951000212)","description":"\u003cp\u003eThe XMT 400 with Intellx feeders offer scalable solutions with dedicated wire feeder options.  The Intellx pro feeder provides extra benefits over the basic feeder such as EZ-Set MIG, Accu-Pulse, memory buttons and steel\/stainless weld programs.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese XMT 400 systems do not have ArcReach technology, rather they use ArcConnect cables so these systems are designed for fab shops and manufacturing.  If you need an XMT 400 with ArcReach for field work using an ArcReach feeder, you can view those machines \u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/search?q=xmt+400+arcreach\u0026amp;type=product\"\u003ehere\u003c\/a\u003e.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEZ-Set\u003c\/strong\u003e - simplifies parameter setup based on material thickness, removing complexity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccu-Pulse\u003c\/strong\u003e - offers a more forgiving arc and compensates for variations in operator technique, providing a wider operating window.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Auto Remote Sense\u003cbr\u003e• Dinse Style Weld Disconnects\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntellx Pro Features\u003c\/strong\u003e\u003cbr\u003e• EZ-Set MIG\u003cbr\u003e• EZ-Set Accu-Pulse\u003cbr\u003e• Trigger Select\u003cbr\u003e• Preflow and Postflow\u003cbr\u003e• 2 Memory Slots\u003cbr\u003e• Steel\/Stainless Programs\u003cbr\u003e• Digital Meters\u003cbr\u003e• Remote Voltage \u003cbr\u003e• Wire Feed Speed\u003cbr\u003e• Arc Control\u003cbr\u003e• Trigger Hold\u003cbr\u003e• Wire Jog and Purge\u003cbr\u003e• Wire Feed Speed Feedback\u003cbr\u003e• Four Drive Rolls\u003cbr\u003e• Rotatable Drive\u003cbr\u003e• Up to 60lb Spool\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Power Source Weight: 75 lbs\u003cbr\u003e• Power Source Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003cbr\u003e\u003c\/strong\u003e• XMT 400 with Dinse Connectors (907881)\u003cbr\u003e• Intellx Pro Single Feeder (951784001)\u003cbr\u003e• 15 ft 400A Bernard MIG Gun\u003cbr\u003e• MIGRunner Cart (195445)\u003cbr\u003e• .035\/.045 V-Groove Drive Rolls (227061)\u003cbr\u003e• Regulator and 10 ft Gas Hose\u003cbr\u003e• 15 ft Work Cable and Clamp\u003cbr\u003e• ArcConnect Control Cable\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":51220203995423,"sku":"IMIL20250090","price":14749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951000212.jpg?v=1757611004"},{"product_id":"miller-xmt-400-migrunner-w-intellx-elite-feeder-951972","title":"Miller XMT 400 MIGRunner w\/Intellx Elite Feeder (951972)","description":"\u003cp\u003eThe XMT 400 with Intellx feeders offer scalable solutions with dedicated wire feeder options.  The Intellx elite feeder provides extra benefits over the pro feeder such as EZ-Set Versa-Pulse, EZ-Set High-deposition MIG, and EZ-Set RMD.  The Intellx Elite feeder also includes out-of-box programs for aluminum, nickel, and titanium.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese XMT 400 systems do not have ArcReach technology, rather they use ArcConnect cables so these systems are designed for fab shops and manufacturing.  If you need an XMT 400 with ArcReach for field work using an ArcReach feeder, you can view those machines \u003ca href=\"https:\/\/www.weldingsuppliesfromioc.com\/search?q=xmt+400+arcreach\u0026amp;type=product\"\u003ehere\u003c\/a\u003e.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEZ-Set\u003c\/strong\u003e - simplifies parameter setup based on material thickness, removing complexity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccu-Pulse\u003c\/strong\u003e - offers a more forgiving arc and compensates for variations in operator technique, providing a wider operating window.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEZ-Set Versa-Pulse\u003c\/strong\u003e - fast, low heat, low spatter process for 1\/4 inch and thinner material.  Great for gap filling and provides shortest arc length\/lowest puls voltage for lower heat and spatter at higher speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Deposition MIG - \u003c\/strong\u003ehigher deposition rater than standard spray transfer on thicker materials.  Designed for welding applications in which spray transfer is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRMD - \u003c\/strong\u003elowest heat process, best for gap handling and limited travel speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Features\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Auto Remote Sense\u003cbr\u003e• Dinse Style Weld Disconnects\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntellx Elite Features\u003c\/strong\u003e\u003cbr\u003e• EZ-Set MIG\u003cbr\u003e• EZ-Set Accu-Pulse\u003cbr\u003e• Trigger Select\u003cbr\u003e• Preflow and Postflow\u003cbr\u003e• 8 Memory Slots\u003cbr\u003e• Steel\/Stainless Programs\u003cbr\u003e• Digital Meters\u003cbr\u003e• Remote Voltage \u003cbr\u003e• Wire Feed Speed\u003cbr\u003e• Arc Control\u003cbr\u003e• Trigger Hold\u003cbr\u003e• Wire Jog and Purge\u003cbr\u003e• Wire Feed Speed Feedback\u003cbr\u003e• Four Drive Rolls\u003cbr\u003e• Rotatable Drive\u003cbr\u003e• Up to 60lb Spool\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXMT Quick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Power Source Weight: 75 lbs\u003cbr\u003e• Power Source Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003cbr\u003e\u003c\/strong\u003e• XMT 400 with Dinse Connectors (907881)\u003cbr\u003e• Intellx Elite Single Feeder (951941001)\u003cbr\u003e• 15 ft 400A Bernard MIG Gun\u003cbr\u003e• MIGRunner Cart (195445)\u003cbr\u003e• .035\/.045 V-Groove Drive Rolls (227061)\u003cbr\u003e• Regulator and 3 ft Gas Hose\u003cbr\u003e• 10 ft 4\/0 Work Cable and Clamp\u003cbr\u003e• 5 ft ArcConnect Control Cable\u003cbr\u003e• 6 ft 4\/0 Weld Cable from Feeder to Power Source\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":51220239450399,"sku":"IMIL20250091","price":17785.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/951972.jpg?v=1757612441"},{"product_id":"miller-xmt-400-multiprocess-welder-w-dinse-connectors-907881","title":"Miller XMT 400 Multiprocess Welder w\/Dinse Connectors (907881)","description":"\u003cp\u003eThe XMT multi-process welders offer portability, auto-line technology, and excellent arc performance. This model XMT 400 does \u003cstrong\u003enot \u003c\/strong\u003ehave ArcReach technology, but does have ArcConnect and 14-Pin receptacles.  These units come with Dinse Style connections, but can also be field changed over to Tweco connections.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Auto-Line voltage hookup (208-575V)\u003cbr\u003e• 1 or 3-Phase Capable\u003cbr\u003e• 14-Pin Receptacle\u003cbr\u003e• Adaptive Hot Start\u003cbr\u003e• RMD and Pulsed MIG\u003cbr\u003e• Infinite Arc Control\u003cbr\u003e• Lift-Arc\u003cbr\u003e• Fan-on-Demand\u003cbr\u003e• Lightweight, Aerospace-Grade Aluminum Case\u003cbr\u003e• Large, Dual Digital Meters\u003cbr\u003e• Process Selector Switch\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eArcConnect\u003c\/strong\u003e is a next generation communication that utilizes high speed signals to improve weld performance and allow point-of-use controls to be located at the feeder.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegulated Metal Deposition and Pulsed MIG\u003c\/strong\u003e are fully supported, enabling operators to use these advanced processes in the field for faster, more efficient welds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAuto Remote Sense\u003c\/strong\u003e enables the unit to automatically use remote control if connected to remote control receptacle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuick Specs\u003c\/strong\u003e\u003cbr\u003e• Voltage Range: 10-38V\u003cbr\u003e• Amperage Range: 15-425A\u003cbr\u003e• Duty Cycle: 60% @ 400A 3-Phase | 60% @ 300A 1-Phase\u003cbr\u003e• Weight: 75 lbs\u003cbr\u003e• Dims: 17.25\" H x 12.75\" W x 20.25\" D\u003cbr\u003e\u003c\/p\u003e","brand":"Miller","offers":[{"title":"Default Title","offer_id":52623620276511,"sku":null,"price":8007.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1865\/0911\/files\/907881Placeholder.jpg?v=1781800845"}],"url":"https:\/\/www.weldingsuppliesfromioc.com\/collections\/titanium-machines.oembed?page=2","provider":"Welding Supplies from IOC","version":"1.0","type":"link"}