Tweco Fabricator 252I MIG, TIG, Stick Welder Pkg. with Cart (W1004402)
4.00 / 5 stars with
1 reviews
Out of stock
$2,774.00
$1,955.00
+ Free Shipping!
(Save $819.00)
Single cylinder cart included. Cylinder is not.
The Tweco Fabricator 3-in-1 252i Welding System (W1004402) features MIG, Stick, and TIG welding capabilities; all in a portable package. Weighing in at only 66 lbs, this integrated platform has automatic input voltage selection from 208-230 VAC and an operating range of 187 - 276 VAC.
MIG:
• Infinite Voltage Control with optimized starting performance.
• Inductance Control for arc stability and spatter control.
• Tweco MIG Gun w/15 ft. cable and industry standard Tweco #4 connection.
• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• 4", 8", or 12" Spool capacity allows easy installation of wire spool sizes.
• Spool Gun ready
STICK:
• Adjustable Arc Force Control for optimum STICK electrode performance.
• Excellent 6010 welding electrode performance.
TIG:
• Lift TIG Start: Provides TIG arc starting without use of high frequency.
Other Features:
• PFC Power Factor Correction: Up to 40% more electrically efficient than conventional MIG Welders.
• Digital Meters: Voltage and Amperage; Preview and Hold capability.
• Excellent Portability: Lightweight, less than 66 lbs.
• Comprehensive Setup Chart: Weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates operator fatigue.
• Remote Receptacle: Enables connection of remote control devices and Spool Gun.
• Quick Change Polarity: Simple quick change polarity (no tools required) from the front of the power source.
• Overload Protection: Shuts down the power source to protect the internal electrical components from overheating.
• IP23S: Suitable for outdoor use.
• Advanced Features: Includes Pre & Post Flow, Down Slope, Hot Start, Spot, Stitch, Burn Back, Wire Sharp, Arc Hour
Includes:
• Fabricator 252i Power Supply
• Tweco WeldSkill 200 Amp Ground Clamp with 10 ft (3 m) Lead
• Victor EDGE Argon Flow Gauge
• Tweco WeldSkill 200 Amp Electrode
• Outlet Guide, .023" (0.6mm)
• 15 ft (4.6 m) Tweco Fusion 250 Amp MIG Gun
• Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
• 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
• Operator’s Manual
• Single Cylinder Professional Cart
• Holder with 13 ft (4 m) Lead
Drive Rolls:
• .035" / .045" V Groove Lower & Flat Upper (Fitted)
• .023" / .030" / .035" V Groove
• .045" Flux Cored Roll
Contact Tips (1 each):
• .030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
MIG:
• Infinite Voltage Control with optimized starting performance.
• Inductance Control for arc stability and spatter control.
• Tweco MIG Gun w/15 ft. cable and industry standard Tweco #4 connection.
• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• 4", 8", or 12" Spool capacity allows easy installation of wire spool sizes.
• Spool Gun ready
STICK:
• Adjustable Arc Force Control for optimum STICK electrode performance.
• Excellent 6010 welding electrode performance.
TIG:
• Lift TIG Start: Provides TIG arc starting without use of high frequency.
Other Features:
• PFC Power Factor Correction: Up to 40% more electrically efficient than conventional MIG Welders.
• Digital Meters: Voltage and Amperage; Preview and Hold capability.
• Excellent Portability: Lightweight, less than 66 lbs.
• Comprehensive Setup Chart: Weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates operator fatigue.
• Remote Receptacle: Enables connection of remote control devices and Spool Gun.
• Quick Change Polarity: Simple quick change polarity (no tools required) from the front of the power source.
• Overload Protection: Shuts down the power source to protect the internal electrical components from overheating.
• IP23S: Suitable for outdoor use.
• Advanced Features: Includes Pre & Post Flow, Down Slope, Hot Start, Spot, Stitch, Burn Back, Wire Sharp, Arc Hour
Includes:
• Fabricator 252i Power Supply
• Tweco WeldSkill 200 Amp Ground Clamp with 10 ft (3 m) Lead
• Victor EDGE Argon Flow Gauge
• Tweco WeldSkill 200 Amp Electrode
• Outlet Guide, .023" (0.6mm)
• 15 ft (4.6 m) Tweco Fusion 250 Amp MIG Gun
• Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
• 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
• Operator’s Manual
• Single Cylinder Professional Cart
• Holder with 13 ft (4 m) Lead
Drive Rolls:
• .035" / .045" V Groove Lower & Flat Upper (Fitted)
• .023" / .030" / .035" V Groove
• .045" Flux Cored Roll
Contact Tips (1 each):
• .030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
CUSTOMERS ALSO BOUGHT:
| Brand | Tweco |
|---|---|
| SKU | ITHE00000073 |
| MPN | THAW1004402 |
| Mfgs MPN | W1004402 |
| UPC | 822635021393 |
| Prop65 | Yes |
| Material | Mild Steel, Stainless Steel |
| Process | Flux-Cored, MIG, Stick, TIG |
| Max Amperage Output | 300 |
| Usage | Industrial |
| Phase | Single Phase |
| Manufacturer's Warranty | 3 Years |
| Polarity | DC |
| Duty Cycle | 100% |
| Duty Cycle | 100% at 150A, 60% at 200A, 40% at 250A |
| Portability | 65.3 lbs |
| Skill Level | Weekend Warrior, Career Welder |
| Input Voltage | 208, 230 |
| Discontinued Product | No |
