Lincoln Magnum Pro Curve 200 Ready Pak (K2950-2-10-45)
The Magnum Pro Curve 200 series MIG guns feature a lightweight curved handle along with a rotating gun tube for those tight spaces. These guns are suitable for MIG, Flux-Cored (FCAW), and Pulsed MIG operations.
The ready pak comes with the Pro 200 Mig gun, .035-.045 liner, and K466-10 connector kit. The K466-10 connector kit works with LF-72, LF-74, LN-25 PRO, Power Feed 10 and 25 Series.
Features
• Duty Cycle: 60% @ 150A (Mixed Gas) | 60% @ 200A (CO2)
• Wire Diameter: .025 - 3/64
• High Quality Copper Parts
• Curve Handle Design
• Rotating Gun Tube
• Gun Hanger Clip
Includes
• Magnum Pro Curve 200 Gun
• Liner (.035-.045)
• Connector Kit (K466-10)
• (1) KP2744-045 Contact Tip
• (1) .0625 Thread On Nozzle with 1/8" Recess (KP2742-1-62R)
• (1) Thread-On-Diffuser (KP2746-1)
The ready pak comes with the Pro 200 Mig gun, .035-.045 liner, and K466-10 connector kit. The K466-10 connector kit works with LF-72, LF-74, LN-25 PRO, Power Feed 10 and 25 Series.
Features
• Duty Cycle: 60% @ 150A (Mixed Gas) | 60% @ 200A (CO2)
• Wire Diameter: .025 - 3/64
• High Quality Copper Parts
• Curve Handle Design
• Rotating Gun Tube
• Gun Hanger Clip
Includes
• Magnum Pro Curve 200 Gun
• Liner (.035-.045)
• Connector Kit (K466-10)
• (1) KP2744-045 Contact Tip
• (1) .0625 Thread On Nozzle with 1/8" Recess (KP2742-1-62R)
• (1) Thread-On-Diffuser (KP2746-1)
| MPN: | LINK2950-2-10-45 |
|---|
MPN: LINK2950-2-10-45
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
A Complete Review of Miller’s PipeWorx 400
Sometimes, you can just tell a product was made by someone who didn’t actually think about using the item. The infamous example is scissors that come in a package that requires scissors to open.
Mi...
Guide
The Welding Hazards No One Talks About
Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...