Skip to content
Crown Alloy .035 x 8" E 71T-GS Flux-Cored Steel MIG 10 lb SPOOL (MS71GS/2F)
Crown E 71T-GS is a self-shielded flux-cored electrode designed for the semi-automatic and automatic welding of thin-gauge galvanized and carbon steel. It is recommended for single pass welding only in all positions using no shielding gas. Crown E 71T-GS is not recommended for welding steel sections thicker than 3/16 inches. The arc action is smooth and stable, excellent at low welding currents. Good wetting action makes the Crown E 71T-GS well suited for the lap and butt joint welds encountered in body panel and sheet metal duct work. Bead geometry and appearance are excellent even when welding in the vertical down position. Spatter levels are very low. This alloy is very well suited for use in portable welding systems, as the smaller diameters perform well on portable 110 volt input welding machines. No external shielding gas is required either.
Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies from IOC recommends that you read and understand the Material Safety Data Sheets and product warning statements prior to using this product.
Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies from IOC recommends that you read and understand the Material Safety Data Sheets and product warning statements prior to using this product.
| MPN: | MS71GS/2F |
|---|---|
| UPC: | 412300730922 |
MPN: MS71GS/2F
UPC: 412300730922
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Stick
Venture 150 S: Miller’s Battery-Powered Revolution
Portable welding has always been limited by one thing: A plug. Up until now, if you wanted to lay a bead in a remote place, you’d either need a really long extension cord or some type of generator....
MIG
Millermatic 252 vs. Its Competitors: Which Is Right for You?
Investing in a quality, high-powered MIG machine can drastically improve your welding capabilities. While the Millermatic 252 is a well-known favorite, a savvy customer knows it’s always best to ex...
Stick
ESAB HandyArc 1/8 – The Smallest Welder You’ve Ever Seen
ESAB’s newest stick welder, the HandyArc 1/8, proves that size doesn’t matter – at least when used correctly. While this machine won’t be perfect for every situation, it’s one of the most portable ...