Hypertherm Smart SYNC 85A FlushCut Cartridge (428953)
Hypertherm's SYNC technology allows the power source to communicate with the SmartSync torch and cartridge, thus increasing productivity. The one piece Sync cartridge replaces Hypertherm's traditional five piece setup, thus reducing consumable confusion and optimizing consumable life. Sync systems contain an end-of-life consumable detection on the torch and the power source, letting the user know when to properly change the cartridge. The cartridge also retains its end-of-life status so it can not be re-used improperly.
Sync cartridges can be used on Duramax torches with the proper adapter (428951). Sync cartridges are NOT recommended for Duramax Retrofit torches.
End-of-Life detection is disabled when one of the following occur
• A Fine Cut hand cutting cartridge is installed
• The amperage is set below 40 amps for any type of cartridge
• The output amperage is set below 55 amps and no communication between the cartridge and system
SYNC Features
• Color Coded Single-Piece Cartridge Consumable (Hand, Mechanized/Stand Off, Gouging, and FlushCut/HyAccess)
• Radio Frequency Identification (RFID)
• Consumable Life Data Tracking
Sync cartridges can be used on Duramax torches with the proper adapter (428951). Sync cartridges are NOT recommended for Duramax Retrofit torches.
End-of-Life detection is disabled when one of the following occur
• A Fine Cut hand cutting cartridge is installed
• The amperage is set below 40 amps for any type of cartridge
• The output amperage is set below 55 amps and no communication between the cartridge and system
SYNC Features
• Color Coded Single-Piece Cartridge Consumable (Hand, Mechanized/Stand Off, Gouging, and FlushCut/HyAccess)
• Radio Frequency Identification (RFID)
• Consumable Life Data Tracking
MPN: HYP428953
UPC: 00662310498900
From The Blog
grinding
Grinding: Techniques, Tools and Tips
It might come as news to those just getting started in the industry, but the welding process doesn't end once you've fused two pieces of metal together. It also starts long before firing up your ma...
Stick
NEW Lincoln Sprinter 180Si Review
Published November 2023.
There’s “brand new” and then there’s “just born, still has the umbilical cord, right out of the oven” brand new. Lincoln’s newest machine is definitely the latter. It’s so ...
Guide
The Welder’s 2023 Holiday Buying Guide
There’s no doubt about it: We saw a couple of reindeer carb-loading the other day, Santa ordering a bunch of coal, and some of the best deals of the year on welding equipment; the holidays are offi...