Miller MDX 250 MIG Gun (177003X)
Lead time: 3-5 Days
Select Size (Consumables):
Select Size (Consumables)
Quantity:
The Miller MDX 250 MIG gun has been redesigned with a few new features. The new ergonomic handle features and overmolding for improved grip and a rear swivel strain relief. The gun’s AccuLock consumables with dual-locked, front-loading liner ensures smooth, consistent wire feeding for reliable operation. This particular MIG gun utilizes Miller's MDX Acculock consumables, not Bernard S Lock consumables. Bernard S Lock consumables may be used, however you would need to swap out the diffuser, contact tip, and nozzle.
MDX 250 Features
• AccuLock Consumables
• Pulse Welding Capable (With Pulse Machine)
• 100% Duty Cycle @ 250A CO2 | 60% With Mixed Gas
Compatible With
• Millermatic 212, 252, and 255
• Multimatic 200 and 255
Included
• MDX 250 Gun (Chosen Length)
• 1/2" Flush Nozzle (M-1200C)
• 4 Contact Tips (2 Each of the Liner Chosen e.g. 1770038 Comes With (2) .035 and (2) .045)
• Owners Manual
Miller AccuLock MDX series consumables are designed to maximize wire feedability and simplify consumables replacement.
AccuLock MDX Features
Superior Feeding - The front-loading liner is centered and locked at both ends of the gun (without the use of set screws) to ensure smooth wire delivery to the contact tip. Plus, error-proof liner trimming ensures accurate replacement every time for reduced burnbacks, birdnests and erratic arc/wire chatter.
Long-Life Consumables - Tapered mating surfaces between the AccuLock contact tip and gas diffuser lock tips in place for maximized electrical conductivity and longer tip life.
Threaded Nozzle - Stays tight during use and cleaning due to the steel retaining ring on the diffuser.
MDX 250 Features
• AccuLock Consumables
• Pulse Welding Capable (With Pulse Machine)
• 100% Duty Cycle @ 250A CO2 | 60% With Mixed Gas
Compatible With
• Millermatic 212, 252, and 255
• Multimatic 200 and 255
Included
• MDX 250 Gun (Chosen Length)
• 1/2" Flush Nozzle (M-1200C)
• 4 Contact Tips (2 Each of the Liner Chosen e.g. 1770038 Comes With (2) .035 and (2) .045)
• Owners Manual
Miller AccuLock MDX series consumables are designed to maximize wire feedability and simplify consumables replacement.
AccuLock MDX Features
Superior Feeding - The front-loading liner is centered and locked at both ends of the gun (without the use of set screws) to ensure smooth wire delivery to the contact tip. Plus, error-proof liner trimming ensures accurate replacement every time for reduced burnbacks, birdnests and erratic arc/wire chatter.
Long-Life Consumables - Tapered mating surfaces between the AccuLock contact tip and gas diffuser lock tips in place for maximized electrical conductivity and longer tip life.
Threaded Nozzle - Stays tight during use and cleaning due to the steel retaining ring on the diffuser.
From The Blog
Engine-Driven Welders
Portable Power: Discover the Bobcat 230
All dressed up with nowhere to go. That’s a phrase you usually don’t hear in the welding world, despite how often it applies. You see, you might be decked out in top-of-the-line gear, with the skil...
MIG
The Exact Step-By-Step Guide to MIG Welding
You could read every single guide on the internet about MIG welding but still have no idea how to turn the machine on. That’s because very few articles cover the exact steps you should take. The un...
General
Will Smartphone Integration Drastically Affect Welding?
Nowadays, everything can be connected to your smartphone. It can run your Netflix, your AC, your house lights—heck, some smartphones can even talk to your mom on her birthday while you sit back and...