Skip to content
Miller Millermatic 212 MIG Welder with Auto-Set (907405)
The 212 is no longer available. The suggested replacement is the Multimatic 235 (951846).
The Miller Millermatic 212 MIG Welder with Auto-Set can handle material from 22 gauge to 3/8 in. thick in a single pass.
Auto-Set
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the guesswork! Simply set the wire diameter, set the material thickness and start welding!
Manual Mode
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Standard Built-In Solid-State Contactor Circuit
Makes wire electrically "cold" until trigger is pulled. This makes unit safer and torch easier to position before starting to weld.
EZ-Change Low Cylinder Rack
Allows users to easily roll cylinders on and off of rack - no need to lift cylinders.
Compatible with Spoolmate 200 Series Spool Gun!
The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wire feed speed.
Line Voltage Compensation
Keeps welding output constant even if power input varies by +/- 10%.
Reduce Maintenance and Operating Costs
Fan-On-Demand cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine.
Larger Work Area
Now with longer 15-ft MDX 250 MIG gun means you can reach more of your work without having to stop and move the machine.
Comes complete with:
• Millermatic 212 power source
• 15 ft (4.5 m), 250 amp MDX 250 MIG Gun (This takes Miller MDX Consumables)
• 10 ft (3 m) work cable with clamp
• Smith Argon and AR/CO2 mix regulator/flowgauge with hose
• 7 ft (2.1 m) power cord and plug
• Factory-installed running gear/cylinder rack
• .030/.035 in reversible dual groove drive rolls
• Extra contact tips, set-up/operation CD
The Miller Millermatic 212 MIG Welder with Auto-Set can handle material from 22 gauge to 3/8 in. thick in a single pass.
Auto-Set
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the guesswork! Simply set the wire diameter, set the material thickness and start welding!
Manual Mode
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Standard Built-In Solid-State Contactor Circuit
Makes wire electrically "cold" until trigger is pulled. This makes unit safer and torch easier to position before starting to weld.
EZ-Change Low Cylinder Rack
Allows users to easily roll cylinders on and off of rack - no need to lift cylinders.
Compatible with Spoolmate 200 Series Spool Gun!
The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wire feed speed.
Line Voltage Compensation
Keeps welding output constant even if power input varies by +/- 10%.
Reduce Maintenance and Operating Costs
Fan-On-Demand cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine.
Larger Work Area
Now with longer 15-ft MDX 250 MIG gun means you can reach more of your work without having to stop and move the machine.
Comes complete with:
• Millermatic 212 power source
• 15 ft (4.5 m), 250 amp MDX 250 MIG Gun (This takes Miller MDX Consumables)
• 10 ft (3 m) work cable with clamp
• Smith Argon and AR/CO2 mix regulator/flowgauge with hose
• 7 ft (2.1 m) power cord and plug
• Factory-installed running gear/cylinder rack
• .030/.035 in reversible dual groove drive rolls
• Extra contact tips, set-up/operation CD
| MPN: | MIL907405 |
|---|---|
| UPC: | 715959393812 |
MPN: MIL907405
UPC: 715959393812
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
General
Miller’s Top Multi-Process Machines
More and more welders are replacing their old machines with multi-process welders each year. The cost- and space-saving benefits make them the ideal choice for anyone who uses more than one process...
Stick
Venture 150 S: Miller’s Battery-Powered Revolution
Portable welding has always been limited by one thing: A plug. Up until now, if you wanted to lay a bead in a remote place, you’d either need a really long extension cord or some type of generator....
MIG
Millermatic 252 vs. Its Competitors: Which Is Right for You?
Investing in a quality, high-powered MIG machine can drastically improve your welding capabilities. While the Millermatic 252 is a well-known favorite, a savvy customer knows it’s always best to ex...