$20 Off Orders Over $500: Code WELD20 | $40 Off Orders Over $1,000: Code WELD40 | $60 Off Orders Over $2,000: Code WELD60 | $200 Off Orders Over $7,000: Code WELD200

*excludes Hypertherm

Lincoln Tomahawk 375 Plasma Cutter (K2806-1)

4.55 / 5 stars with 11 reviews
In stock
$1,937.00 $1,765.00
+ Free Shipping! (Save $172.00)
Ultimate portability.
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The Tomahawk 375 Plasma Cutter from Lincoln arrives at your door ready to tackle the plasma jobs on your list. With the 375 Air, ditch the grinder and grab the torch! Thanks to the internal air compressor, the 375 is great for situations where external compressed air isn't available. Recommended cut of 5/16 inch. Maximum cut of 3/8 inch. Sever cut of 1/2 inch.

Continuous Output Control – Focus the arc for different material thickness.

Touch Start System – Reliable plasma arc initiation without high frequency.

Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.

Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.

Cool Operation, Long Consumable Life - New electrode and nozzle design save you money in the long run.

Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.

Engine Drive Compatible – Select a Lincoln Electric Ranger or Vantage to power your Tomahawk in remote locations.

Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is not available.

• Internal air compressor (external air connection also standard)
• Lincoln Electric LC25 Torch with 10 ft. (3 m) cable
• Air regulator and pressure gauge
• Internal water separator
• Work clamp and cable
• Spare consumables
• Shoulder strap
• Input power cord
More Information
Brand Lincoln
SKU ILIN00000071
MPN LINK2806-1
Mfgs MPN K2806-1
UPC 015082884851
Prop65 Yes
Manufacturer's Warranty 3 Years
Max Amperage Output 25
Usage Light Industrial
Input Voltage 208, 230
Duty Cycle 60%
Duty Cycle 100% at 13A, 85.2V
Rated Cut 5/16 inch
Rated Sever Cut 1/2 inch
Portability 40 lbs
Phase Single Phase
Skill Level Weekend Warrior, Career Welder
Process Plasma
Discontinued Product No

Nice Machine.....But... 4 After using this machine for almost a year, I feel like I can make an quality assessment. It looks great and performs as advertised. The onboard compressor is very handy. However, it is frustrating waiting on the machine to reset once you've pushed it's limits. I mostly cut car body thickness sheet metal and the machine constantly shuts down during long use(over 5 minutes I think). I cannot cut continuously even on low amp settings without some cool down time. Overall, a great machine with limits.
Great machine! 5 The tomahawk 375 does everything I need it to do and does it well. I find it works decent with the onboard air compressor but truly excels when attached to external air.
TOMAHAWK Plasma Cutter 5 Fantastic!
Tomahawk 375 5 This is a great machine for home use. And with the onboard compressor, it is very portable. I dont know how it would perform in production work, but serves my needs just fine!
Nice 4 Nice, very compact
Plasma cutter 4 Plasma cutter worked great but left slight slag when cutting maximum depth at 3/8's
works well 5 works well
Very nice unit and fast 5 Very nice unit and fast shipping
Great Machine 4 The machine has been great so far. It really shines using the external air compressor and doesn't get up against the duty cycle as quick. The portability afforded by the internal compressor is a very handy feature however I would recommend using an external compressor if available. It really does not take a large compressor to operate and works off of my 21 gallon compressor. The consumables seem to last a long time and I am still on the electrode and tip that came in the machine. I am very satisfied with this machine and would recommend it to anyone who needs a machine with a built in compressor. If the torch was easily removable to facilitate cleaner storage I would have given it 5 stars.
Great customer service 4 Bought a plasma cutter , but when it came in prongs on power chord were folded over, damaged during shipping I guess. Nathan offered to ship a replacement power chord, and when he realized they were back ordered, issued a return on the item and will be refunding my purchase. I think I will try to find one closer to avoid shipping issues.
Mr Jim 5 Great little machine works every bit as expected and described Very pleased

Got a Question?

Give us a call. We're glad to help

Copyright © 2023 WELDING SUPPLIES FROM IOC. All Rights Reserved.