Miller Intellx Wire Feeder w/15 Ft Bernard MIG Gun (951783001)
The Miller Intellx wire feeder is designed to be used with the Deltaweld 350 power source. The Intellx feeders come with digital meters, remote voltage, arc control, and jog/purge control. The drive system comes with a balanced-pressure drive roll design that feeds wire in its truest and straightest form for consistent performance. The accu-mate connection aligns gun perfectly in the drive-roll carrier, preventing the gun from being pulled loose and providing consistent wire feeding.
Features
• Digital Display
• Arc Control for fine tuning
• Jog and Purge Button
• Balanced-pressure drive roll design and tensioners
• Rotatable drive assembly
Quick Specs
• Duty Cycle: 60% @ 600A
• Wire Feed Speed: 50-780 IPM
• Wire Diameter: .023-5/64
• Max Spool Size: 18 inches | 60 lbs
• Weight: 44.8 lbs
• Dimensions: 16.25"H x 12.38"W x 27.88"L
Includes
• Intellx Wire Feeder
• 15' 300A Bernard BTB Gun
• .035/.045 V-Groove Drive Rolls
• Centerfire Contact Tips (3) .035 | (2) .045
Features
• Digital Display
• Arc Control for fine tuning
• Jog and Purge Button
• Balanced-pressure drive roll design and tensioners
• Rotatable drive assembly
Quick Specs
• Duty Cycle: 60% @ 600A
• Wire Feed Speed: 50-780 IPM
• Wire Diameter: .023-5/64
• Max Spool Size: 18 inches | 60 lbs
• Weight: 44.8 lbs
• Dimensions: 16.25"H x 12.38"W x 27.88"L
Includes
• Intellx Wire Feeder
• 15' 300A Bernard BTB Gun
• .035/.045 V-Groove Drive Rolls
• Centerfire Contact Tips (3) .035 | (2) .045
MPN: | MIL951783 |
---|---|
UPC: | 715959669443 |
MPN: MIL951783
UPC: 715959669443
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
The Welding Hazards No One Talks About
Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...
TIG
The Ultimate Review of the Square Wave TIG 200
Flagships: Some people think they’re just cursed. The Titanic was the flagship meant to change how we traveled the seas. The Hindenberg was a flagship meant to change how we traveled the skies.
So ...