Miller Supplied Air Respirator (SAR) C50 Air Regulator (270412)
The Miller SAR C50 air regulator is designed for Miller's supplied air respiratory systems that utilize 1/4 inch interchange fittings. This regulator can be mounted vertically or horizontally and cools the incoming air to the helmet up to 50 degrees F.
The nut/washer (272740) that secure the valve plug onto the C50 regulator is not included.
The black muffler (270417) nor the incoming supplied air hose connector (272735) are included and must be purchased separately.
Quick Specs
• 360-Degree Swivel Air Hose Connection
• Cools Incoming Air up to 50 Degrees F
• Flow Rate: Low - At Least 199 LPM | High - At Least 366 LPM (liters per minute)
• Suspension: Belt
• Certification: NIOSH 42 CFR Part 84
• Dimensions: 2.75" H x 11.75" W x 4.13" D
• Weight: 0.9 lbs
The nut/washer (272740) that secure the valve plug onto the C50 regulator is not included.
The black muffler (270417) nor the incoming supplied air hose connector (272735) are included and must be purchased separately.
Quick Specs
• 360-Degree Swivel Air Hose Connection
• Cools Incoming Air up to 50 Degrees F
• Flow Rate: Low - At Least 199 LPM | High - At Least 366 LPM (liters per minute)
• Suspension: Belt
• Certification: NIOSH 42 CFR Part 84
• Dimensions: 2.75" H x 11.75" W x 4.13" D
• Weight: 0.9 lbs
| MPN: | MIL270412 |
|---|---|
| UPC: | 715959619004 |
MPN: MIL270412
UPC: 715959619004
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
The Welding Hazards No One Talks About
Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...
TIG
The Ultimate Review of the Square Wave TIG 200
Flagships: Some people think they’re just cursed. The Titanic was the flagship meant to change how we traveled the seas. The Hindenberg was a flagship meant to change how we traveled the skies.
So ...