Skip to content
Crown Alloy .035 x 2# E 71T-GS Flux-Cored Steel MIG 2 lb SPOOL (MS71GS/1F)
Crown E 71T-GS is a self-shielded flux-cored electrode designed for the semi-automatic and automatic welding of thin-gauge galvanized and carbon steel. It is recommended for single pass welding only in all positions using no shielding gas. Crown E 71T-GS is not recommended for welding steel sections thicker than 3/16 inches. The arc action is smooth and stable, excellent at low welding currents. Good wetting action makes the Crown E 71T-GS well suited for the lap and butt joint welds encountered in body panel and sheet metal duct work. Bead geometry and appearance are excellent even when welding in the vertical down position. Spatter levels are very low. This alloy is very well suited for use in portable welding systems, as the smaller diameters perform well on portable 110 volt input welding machines. No external shielding gas is required either.
Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies from IOC recommends that you read and understand the Material Safety Data Sheets and product warning statements prior to using this product.
Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies from IOC recommends that you read and understand the Material Safety Data Sheets and product warning statements prior to using this product.
| MPN: | MS71GS/1F |
|---|---|
| UPC: | 412300730912 |
MPN: MS71GS/1F
UPC: 412300730912
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Lincoln’s NEW Power MIG 220: the Ultimate All-in-One Machine
For TIG welders, most multiprocess machines have always had a critical flaw: They cannot TIG weld aluminum. When working with that type of material, AC TIG must be used in almost all cases. But for...
TIG
Syncrowave 212: Is It a Worthy Successor to Miller’s Beloved TIG welder?
TIG welding is like patting your head while rubbing your belly, while also doing a Rubik's cube with your feet and whistling Yankee Doodle. Simply put, you’ve got a lot going on while TIG welding (...
Helmets
Is the Miller T94i-R PAPR System Worth It?
Let’s drop a hard truth: In the welding world, an experienced welder is worth more than 20 beginner welders. This is often directly reflected in the pay for welders. Some highly skilled welders can...