Crown Alloy 3/32 x 36" CROWN 8 - 10# Steel (ER 80S-D2) TIG 10 lb BOX (MTCR8/TN-10)

Crown Alloy 3/32 x 36" CROWN 8 - 10# Steel (ER 80S-D2) TIG 10 lb BOX (MTCR8/TN-10)

$135.00

Quantity:
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Crown 8 (ER 80S-D2) is a premium low-alloy cut length TIG filler metal that contains ½ percent molybdenum (for increased strength) and high levels of manganese and silicon to provide good wetting and good rust and scale tolerance. The higher level of deoxidizers (Mn and Si) help to control porosity. Crown 8 (ER 80S-D2) will yield radiographic quality welds with excellent bead appearance in both ordinary and difficult-to-weld carbon and low alloy steels. Crown 8 is THE recommended TIG alloy for welding 4130 tubing up to .120" wall thickness. The combination of weld soundness and strength makes the Crown 8 suitable for single and multiple-pass welding of a variety of carbon and low-alloy, higher strength steels in both the as welded and postweld heat-treated conditions. Maximum mechanical properties are achieved when using a preheat and interpass temperature of 275OF minimum.

From The Blog

Is the Multimatic 215 PRO Worth It?
MIG

Is the Multimatic 215 PRO Worth It?

When all of us here at IOC were kids, ol’ Grandpa Miller would gather us around and read to us the story of The Little Welder That Could. Despite its small size, the little welder could handle almo...
lincoln power mig 220
MIG

Lincoln’s NEW Power MIG 220: the Ultimate All-in-One Machine

For TIG welders, most multiprocess machines have always had a critical flaw: They cannot TIG weld aluminum. When working with that type of material, AC TIG must be used in almost all cases. But for...
miller syncrowave 212 review
TIG

Syncrowave 212: Is It a Worthy Successor to Miller’s Beloved TIG welder?

TIG welding is like patting your head while rubbing your belly, while also doing a Rubik's cube with your feet and whistling Yankee Doodle. Simply put, you’ve got a lot going on while TIG welding (...