Lincoln Flextec 500X Pulsed MIG Multi Process Welder (K3607-1)
Download Product Spec Sheet
The Lincoln Flextec 500X multi process welder is easy to setup and simple to operate, yet rugged enough to withstand temperatures up to 131 degrees fahrenheit. The 500X features Lincoln's CrossLinc technology that enables the user to change weld parameters at the feeder rather than traveling back to the power source. CrossLinc capable power sources may be used with standard feeders, however the full benefits are only achieved when pairing two CrossLinc devices together.
The Flextec 500X is equipped with pulsed MIG technology, including weld modes for carbon, stainless, and aluminum metalcore electrodes. In order to gain the full potential of the pulsed capabilities, simply connect an ArcLink technology feeder. This gives you access to multiple synergic pulse modes. Just pick your mode and wire speed, and the machine will do the rest.
Processes
• Stick
• Flux-Cored
• MIG
• Pulsed MIG
• TIG
• Gouging
Features
• Easy process selection
• Fully encapsulated and environmentally protected electronics
• Compatible with across-the-arc, analog, digital, or Crosslinc feeders
• Full functionality without control cables
• Enables remote procedure setting at the feeder
• Voltage reduction device reduces open circuit voltage for added safety
• Capable of arc gouging with 3/8 inch carbons
Quick Specs
• 380-600 Volt 3 phase power
• Weight - 120lbs
• Duty Cycle - 100% at 450 amps | 60% at 500 amps
• Output Range - 5-500 amps
• Dims - 19 in H x 14 in W x 27 L
Includes
• Flextec 500 power source
No Power Cord Included
The Flextec 500X is equipped with pulsed MIG technology, including weld modes for carbon, stainless, and aluminum metalcore electrodes. In order to gain the full potential of the pulsed capabilities, simply connect an ArcLink technology feeder. This gives you access to multiple synergic pulse modes. Just pick your mode and wire speed, and the machine will do the rest.
Processes
• Stick
• Flux-Cored
• MIG
• Pulsed MIG
• TIG
• Gouging
Features
• Easy process selection
• Fully encapsulated and environmentally protected electronics
• Compatible with across-the-arc, analog, digital, or Crosslinc feeders
• Full functionality without control cables
• Enables remote procedure setting at the feeder
• Voltage reduction device reduces open circuit voltage for added safety
• Capable of arc gouging with 3/8 inch carbons
Quick Specs
• 380-600 Volt 3 phase power
• Weight - 120lbs
• Duty Cycle - 100% at 450 amps | 60% at 500 amps
• Output Range - 5-500 amps
• Dims - 19 in H x 14 in W x 27 L
Includes
• Flextec 500 power source
No Power Cord Included
| MPN: | LINK3607-1 |
|---|---|
| Processes | SMAW, GTAW, GMAW, GMAW-P, FCAW, Arc Gouging |
| Designed For | Fabrication, Shipbuilding, Construction |
| Amperage | 5-500A |
| Input Voltage | 380/460/575/3/50/60 |
| Input Phase | CC/CV - DC |
| Weight | 136 (62) |
MPN: LINK3607-1
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Millermatic 211 Cost, Availability and Accessories
The Millermatic 211 might quite possibly be the best-selling MIG machine of all time. It’s essentially the fine wine of welding equipment: It was revolutionary when it first came out about a decade...
Guide
How to Set Up a Lincoln MIG Welder
Thinking about getting yourself a Lincoln MIG welder? Or maybe you’ve already purchased one and are stoked to lay some beads. Knowing the right way to set up your machine can save you a massive amo...
MIG
Setting up Your Millermatic 211
So, the big Miller box you've been waiting for has finally arrived at your doorstep. Now that the Millermatic 211 is in your hands, how do you set it up? Don't worry; we're here to help you get eve...