Miller Digital Titanium 9400I Series Auto Darkening Welding Helmet (256177)
Miller Digital Titanium 9400I Series Auto Darkening Welding Helmet (256177)

Miller Digital Titanium 9400I Series Auto Darkening Welding Helmet (256177)

$280.00 $398.00
Sold out

warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This helmet is no longer available. The suggested replacement is Miller's T94i (260483) helmet which can be found here.

Miller Digital Titanium 9400i Auto Darkening Welding Helmet with Infotrack (256177)
Welding Supplies from IOC carries only the best welding helmets around. The Miller Digital Titanium 9400I Series Auto Darkening Welding Helmet is a premium welding helmet that welders all aound are going to. It is packed with features like arc tracking technology, new digital controls, and redesigned headgear to give the user maximum comfort ad efficiency while welding. With an inegrated grind shield providing 180 degrees field of viewing along with a 9.22 sq. in viewing area; seeing your masterpiece while you work is no problem. Keeping cool while you work with its silver shell to reflect the heat. The Miller Digital Titanium 9400I Series has enhanced durability with a shock-absorbing gasket to protect the lens from drop impact. It has four operating modes of weld, cut, grind and X-Mode, along with auto-On/Off power control triggers lens at the strike of an arc. Finally, this versatile helmet has Auto-Sense and dash feature to set the sensitivity based on the environment.
Additional Features:
  • Viewing Area &ndash 9.22 sq. in. / 3.85 x 2.38 in (97 x 60 mm)
  • Four Arc Sensors - 1/20,000 sec lens speed
  • Four Operating Modes -
    • Weld Mode &ndash Shades #8 - 13
    • Cut Mode &ndash Shades #5 - 8
    • Grind Mode - Light State #3
    • X-Mode &ndash Can be used in Shades #8 - 13
      • Electromagnetic Arc Sensing eliminates: Sunlight interference - Outdoors, Low-Amperage Lens Opening - TIG, Lens Openings - Pipe/Curves, Obstructed Sensors - Hidden/Cavity Welds
  • Sensitivity and Delay Control - .10 &ndash 1.0 sec.
  • TIG Rating &ndash 5 amps and below
  • Lithium batteries (2) &ndash with solar assist up to 3,000 hours
  • Weight - 24 oz (680 g)
  • Meets Ansi Z87.1-2003 (High Impact) standard

What's Included: Bonus

  • 5 outside cover lenses
  • 2 inside cover lenses
  • Helmet bag

The Inside And Outside Cover (Protection) Lenses For No Additional Shipping At Time Of Helmet Purchase.

216326 Outside Lens Pkg Of 5

216327 Inside Lens Pkg Of 5

245818 Grinding Shield (Lens) Ea.

.

From The Blog

Portable Power: Discover the Bobcat 230
Engine-Driven Welders

Portable Power: Discover the Bobcat 230

All dressed up with nowhere to go. That’s a phrase you usually don’t hear in the welding world, despite how often it applies. You see, you might be decked out in top-of-the-line gear, with the skil...
The Exact Step-By-Step Guide to MIG Welding
MIG

The Exact Step-By-Step Guide to MIG Welding

You could read every single guide on the internet about MIG welding but still have no idea how to turn the machine on. That’s because very few articles cover the exact steps you should take. The un...
Will Smartphone Integration Drastically Affect Welding?
General

Will Smartphone Integration Drastically Affect Welding?

Nowadays, everything can be connected to your smartphone. It can run your Netflix, your AC, your house lights—heck, some smartphones can even talk to your mom on her birthday while you sit back and...