Miller Maxstar 200 DX TIG Welder and Air-Cooled Contractor Kit with Fingertip Control (951173)
When the job demands greater control, pick the Miller MaxStar 200 DX TIG Welder with Fingertip Control and Air-Cooled Contractor Kit. The 200 DX provides pulse on/off, pulse frequency, a higher duty cycle, background amps, initial amps, initial slope time, final slope time, and final amperage control.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 DX power source
• Quick Reference Guide: English | Spanish
• Adjustable shoulder strap
• 8 ft (2.4 m) primary cord
• (2) international (Dinse 50 mm) connectors
Contractor Kit (195055) includes:
• RCCS-14 fingertip control (043688)
• Protective carrying case
• 150 amp Weldcraft 25 ft (7.6 m) WP17 TIG torch with adapter
• Smith flow gauge regulator with gas hose
• AK2C accessory kit (.040", 1/16" and 3/32" cerium tungsten, collets and cups)
• 200 amp, 15 ft (4.6 m) stick electrode holder
• Work clamp with 15 ft (4.6 m) #4 cable and Dinse connector
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 DX power source
• Quick Reference Guide: English | Spanish
• Adjustable shoulder strap
• 8 ft (2.4 m) primary cord
• (2) international (Dinse 50 mm) connectors
Contractor Kit (195055) includes:
• RCCS-14 fingertip control (043688)
• Protective carrying case
• 150 amp Weldcraft 25 ft (7.6 m) WP17 TIG torch with adapter
• Smith flow gauge regulator with gas hose
• AK2C accessory kit (.040", 1/16" and 3/32" cerium tungsten, collets and cups)
• 200 amp, 15 ft (4.6 m) stick electrode holder
• Work clamp with 15 ft (4.6 m) #4 cable and Dinse connector
MPN: | MIL951173 |
---|---|
UPC: | 715959420372 |
MPN: MIL951173
UPC: 715959420372
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Millermatic 211 Cost, Availability and Accessories
The Millermatic 211 might quite possibly be the best-selling MIG machine of all time. It’s essentially the fine wine of welding equipment: It was revolutionary when it first came out about a decade...
Guide
How to Set Up a Lincoln MIG Welder
Thinking about getting yourself a Lincoln MIG welder? Or maybe you’ve already purchased one and are stoked to lay some beads. Knowing the right way to set up your machine can save you a massive amo...
MIG
Setting up Your Millermatic 211
So, the big Miller box you've been waiting for has finally arrived at your doorstep. Now that the Millermatic 211 is in your hands, how do you set it up? Don't worry; we're here to help you get eve...