Skip to content
Miller Maxstar 200 DX TIG Welder and Air-Cooled Contractor Kit with Foot Control (951172)
This package has been discontinued by Miller. Suggested replacement is the Maxstar 210DX (907684) Power Source
When the job demands greater control, pick the Miller MaxStar 200 DX TIG Welder with Foot Control and Air-Cooled Contractor Kit. The 200 DX provides pulse on/off, pulse frequency, a higher duty cycle, background amps, initial amps, initial slope time, final slope time, and final amperage control.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to tr+C97aditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 DX power source
• Quick Reference Guide: English | Spanish
• Adjustable shoulder strap
• 8 ft (2.4 m) primary cord
• (2) international (Dinse 50 mm) connectors
Contractor Kit (195055) includes:
• RFCS-14HD foot control (194744)
• Protective carrying case
• 150 amp Weldcraft 25 ft (7.6 m) WP17 TIG torch with adapter
• Smith flow gauge regulator with gas hose
• AK2C accessory kit (.040", 1/16" and 3/32" cerium tungsten, collets and cups)
• 200 amp, 15 ft (4.6 m) stick electrode holder
• Work clamp with 15 ft (4.6 m) #4 cable and Dinse connector
When the job demands greater control, pick the Miller MaxStar 200 DX TIG Welder with Foot Control and Air-Cooled Contractor Kit. The 200 DX provides pulse on/off, pulse frequency, a higher duty cycle, background amps, initial amps, initial slope time, final slope time, and final amperage control.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to tr+C97aditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 DX power source
• Quick Reference Guide: English | Spanish
• Adjustable shoulder strap
• 8 ft (2.4 m) primary cord
• (2) international (Dinse 50 mm) connectors
Contractor Kit (195055) includes:
• RFCS-14HD foot control (194744)
• Protective carrying case
• 150 amp Weldcraft 25 ft (7.6 m) WP17 TIG torch with adapter
• Smith flow gauge regulator with gas hose
• AK2C accessory kit (.040", 1/16" and 3/32" cerium tungsten, collets and cups)
• 200 amp, 15 ft (4.6 m) stick electrode holder
• Work clamp with 15 ft (4.6 m) #4 cable and Dinse connector
| MPN: | MIL951172 |
|---|---|
| UPC: | 715959420365 |
MPN: MIL951172
UPC: 715959420365
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Stick
ESAB HandyArc 1/8 – The Smallest Welder You’ve Ever Seen
ESAB’s newest stick welder, the HandyArc 1/8, proves that size doesn’t matter – at least when used correctly. While this machine won’t be perfect for every situation, it’s one of the most portable ...
Helmets
The Ultimate Guide to Lincoln Welding Helmets
It’s a good feeling: Walking up to a job site with your Lincoln Viking helmet while the other welders eyeball you like “Oh dang, wish I had a hood like that!” With their reliability, comfort and pr...
MIG
How to Get the Best Price on the Millermatic 252
As one of Miller’s most beloved MIG machines, the Millermatic 252 is a beast with the highest output in its class. This workhorse of a welder should be considered an investment in your capabilities...