Miller Maxstar 200 SD TIG Welder (903701)
The Miller MaxStar 200 SD TIG Welder provides the basic featues that are required for most TIG or Stick welding applications.
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 SD power source
• Quick Reference Guide: English | Spanish
• 8 ft (2.4 m) primary cord
• DVD set-up video
• (2) Dinse 50 mm connectors
• Air-cooled torch adapter (195378)
• Adjustable shoulder strap
Wireless Remote Control Compatible
Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.
Lift-Arc
Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.
Stick Features (DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start
Adaptive control provides positive arc starts without sticking.
Low OCV Stick
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Blue Lightning High Frequency Arc Starter
For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
DC TIG Features
DC TIG provides exceptionally smooth and precise arc for welding exotic materials.
Comes complete with:
• Maxstar 200 SD power source
• Quick Reference Guide: English | Spanish
• 8 ft (2.4 m) primary cord
• DVD set-up video
• (2) Dinse 50 mm connectors
• Air-cooled torch adapter (195378)
• Adjustable shoulder strap
MPN: MIL903701
UPC: 715959236034
Phase: Both
From The Blog
Engine-Driven Welders
The Bobcat 265: The Next Generation of Welder/Generators
If the old Bobcat series was the best thing since sliced bread, then the next-generation Bobcat 265 is the best thing since happy hour. Miller’s Bobcat series has always been a legend—and now that ...
Projects
Fence Welding Ideas You Have To See
When it comes to welding a project yourself versus simply buying it pre-made, it’s often surprisingly cheaper to buy rather than DIY (check out our post on the topic here). However, fences and gate...
Engine-Driven Welders
Portable Power: Discover the Bobcat 230
All dressed up with nowhere to go. That’s a phrase you usually don’t hear in the welding world, despite how often it applies. You see, you might be decked out in top-of-the-line gear, with the skil...