Skip to content
Miller Maxstar 200 STR Low OCV Stick Welder (907036)
This product is no longer available *** Suggested replacement machine is Miller 907682 ***
Features:
• Auto-Line provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. • Low OCV Stick reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
• Superior Stick arc performance on all input voltages. Even on the difficult to run electrodes like E6010.
• Portable in shop or at job site - at 32lb the Maxstar 200 STR is easily moved from location to location.
• Adaptive Hot Start for Stick arc starts automatically increases output amperage at start of weld should the start require it. Prevents electrode from sticking and creating an inclusion.
• Lift Arc start for TIG arc starts without the use of high frequency.
• Fan-On-Demand operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
• Wind Tunnel Technology provides internal air flow that protects electrical components and PC boards from dirt, dust, debris; greatly improving reliability.
• Line Voltage Compensation (LVC) keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Comes complete with:
• 8 ft Power Cord and 2 Dinse Connectors
• Low OCV with StickStuck
Features:
• Auto-Line provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. • Low OCV Stick reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
• Superior Stick arc performance on all input voltages. Even on the difficult to run electrodes like E6010.
• Portable in shop or at job site - at 32lb the Maxstar 200 STR is easily moved from location to location.
• Adaptive Hot Start for Stick arc starts automatically increases output amperage at start of weld should the start require it. Prevents electrode from sticking and creating an inclusion.
• Lift Arc start for TIG arc starts without the use of high frequency.
• Fan-On-Demand operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
• Wind Tunnel Technology provides internal air flow that protects electrical components and PC boards from dirt, dust, debris; greatly improving reliability.
• Line Voltage Compensation (LVC) keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Comes complete with:
• 8 ft Power Cord and 2 Dinse Connectors
• Low OCV with StickStuck
| MPN: | MIL907036 |
|---|---|
| UPC: | 715959267427 |
MPN: MIL907036
UPC: 715959267427
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Lincoln’s NEW Power MIG 220: the Ultimate All-in-One Machine
For TIG welders, most multiprocess machines have always had a critical flaw: They cannot TIG weld aluminum. When working with that type of material, AC TIG must be used in almost all cases. But for...
TIG
Syncrowave 212: Is It a Worthy Successor to Miller’s Beloved TIG welder?
TIG welding is like patting your head while rubbing your belly, while also doing a Rubik's cube with your feet and whistling Yankee Doodle. Simply put, you’ve got a lot going on while TIG welding (...
Helmets
Is the Miller T94i-R PAPR System Worth It?
Let’s drop a hard truth: In the welding world, an experienced welder is worth more than 20 beginner welders. This is often directly reflected in the pay for welders. Some highly skilled welders can...