Miller Multimatic 200 Multiprocess Welder with TIG Contractor Kit (951649)
Miller has discontinued the Multimatic 200. The suggested replacement is the Multimatic 215 (907693 / 951674).
The Miller Millermatic 200 is the only all-in-one, portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds and running on either 120 or 230 V, the Multimatic 200 can go anywhere.
Auto-Set Elite
Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
Excellent arc characteristics!
Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.
Simple Aluminum Solution
Spoolmate 100 direct-connect spool gun offers a reliable and economical solution for welding aluminum up to 1/4 inch with 4043 aluminum wire.
Fan-On-Demand
Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.
Ultimate Durability
The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.
Plugs in Anywhere!
Multi-voltage plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools-choose the plug that fits the receptacle and connect it to the power cord.
Miller's Auto-Line Technology
Provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source.
TIG Contractor Kit
The Multimatic 200 TIG Contractor Kit (301287) gives you everything you need for remote TIG welding with the Multimatic 200.
Comes complete with:
• Multimatic 200 power source
• Power cord and MVP plugs for 120 and 230 V
• 10-ft. (3 m) Miller MDX 250 MIG gun (Accepts Miller MDX Consumables)
• 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector
• 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
• Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
• Dual-groove quick-change drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) wire
• Smith Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
• Information/settings chart and quick setup guide
• Material thickness gauge
TIG Kit Includes:
• Weldcraft 150Amp WP-17 TIG Torch with 25mm Dinse
• AK-2 Accessory Kit
• Remote Foot Control
• Smith Regulator & Gas Hose
The Miller Millermatic 200 is the only all-in-one, portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds and running on either 120 or 230 V, the Multimatic 200 can go anywhere.
Auto-Set Elite
Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
Excellent arc characteristics!
Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.
Simple Aluminum Solution
Spoolmate 100 direct-connect spool gun offers a reliable and economical solution for welding aluminum up to 1/4 inch with 4043 aluminum wire.
Fan-On-Demand
Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.
Ultimate Durability
The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.
Plugs in Anywhere!
Multi-voltage plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools-choose the plug that fits the receptacle and connect it to the power cord.
Miller's Auto-Line Technology
Provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source.
TIG Contractor Kit
The Multimatic 200 TIG Contractor Kit (301287) gives you everything you need for remote TIG welding with the Multimatic 200.
Comes complete with:
• Multimatic 200 power source
• Power cord and MVP plugs for 120 and 230 V
• 10-ft. (3 m) Miller MDX 250 MIG gun (Accepts Miller MDX Consumables)
• 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector
• 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
• Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
• Dual-groove quick-change drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) wire
• Smith Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
• Information/settings chart and quick setup guide
• Material thickness gauge
TIG Kit Includes:
• Weldcraft 150Amp WP-17 TIG Torch with 25mm Dinse
• AK-2 Accessory Kit
• Remote Foot Control
• Smith Regulator & Gas Hose
| MPN: | MIL951649 |
|---|---|
| UPC: | 715959598514 |
MPN: MIL951649
UPC: 715959598514
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Millermatic 211 Cost, Availability and Accessories
The Millermatic 211 might quite possibly be the best-selling MIG machine of all time. It’s essentially the fine wine of welding equipment: It was revolutionary when it first came out about a decade...
Guide
How to Set Up a Lincoln MIG Welder
Thinking about getting yourself a Lincoln MIG welder? Or maybe you’ve already purchased one and are stoked to lay some beads. Knowing the right way to set up your machine can save you a massive amo...
MIG
Setting up Your Millermatic 211
So, the big Miller box you've been waiting for has finally arrived at your doorstep. Now that the Millermatic 211 is in your hands, how do you set it up? Don't worry; we're here to help you get eve...