Skip to content
Miller SuitCase X-Treme 12VS with Bernard Dura-Flux Gun and Meters (951544)
Download Product Spec Sheet
The 951544 12VS is no longer available. The suggested replacement is the 951731 12VS ArcReach Feeder.
You guessed it, the Miller SuitCase X-Treme 12VS with Bernard Dura-Flux Gun and Meters includes a Bernard Dura-Flux gun.
Features
• X-Treme 12VS provides wire feed speed that is accurate and consistent from the start of the weld to the finish, and from one weld to the next.
• Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates.
• New, wire delivery system bends wire over a large radius and applies just the right amount of force to ensure consistent feeding.
• Polypropylene case with built-in slide rails and the ability to open the door to change wire with feeder in vertical position.
• Dura-Flux gun - 350-amp, 60% duty cycle, air-cooled, 15 ft cable
• Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
• Improved contactor for high-amperage, high duty cycle applications (8VS: 330 A at 60%).
• Trigger hold, wire jog, and gas purge are all located on front panel
• Wider voltage range for small and large wires with no contactor chatter or arc outages.
• Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
• Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply.
• Digital meters with SunVision technology can display voltage and wire speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
• Weight - 35 lbs
Includes
• 12VS Feeder (300876)
• 15' Bernard Flux-core gun (FLX3515AM)
• Drive Rolls - .068/.072-5/64 V Knurled (301092)
You guessed it, the Miller SuitCase X-Treme 12VS with Bernard Dura-Flux Gun and Meters includes a Bernard Dura-Flux gun.
Features
• X-Treme 12VS provides wire feed speed that is accurate and consistent from the start of the weld to the finish, and from one weld to the next.
• Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates.
• New, wire delivery system bends wire over a large radius and applies just the right amount of force to ensure consistent feeding.
• Polypropylene case with built-in slide rails and the ability to open the door to change wire with feeder in vertical position.
• Dura-Flux gun - 350-amp, 60% duty cycle, air-cooled, 15 ft cable
• Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
• Improved contactor for high-amperage, high duty cycle applications (8VS: 330 A at 60%).
• Trigger hold, wire jog, and gas purge are all located on front panel
• Wider voltage range for small and large wires with no contactor chatter or arc outages.
• Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
• Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply.
• Digital meters with SunVision technology can display voltage and wire speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
• Weight - 35 lbs
Includes
• 12VS Feeder (300876)
• 15' Bernard Flux-core gun (FLX3515AM)
• Drive Rolls - .068/.072-5/64 V Knurled (301092)
| MPN: | MIL951544 |
|---|---|
| UPC: | 715959588591 |
Download Product Spec SheetBrands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Helmets
Is the Miller T94i-R PAPR System Worth It?
Let’s drop a hard truth: In the welding world, an experienced welder is worth more than 20 beginner welders. This is often directly reflected in the pay for welders. Some highly skilled welders can...
MIG
Everything You Should Know About the New Millermatic 211 PRO
The Millermatic 211 is dead; long live the Millermatic 211 PRO. That’s right, possibly the best-selling MIG machine in history now has a successor. In this article, we’ll cover everything you need ...
General
Miller’s Top Multi-Process Machines
More and more welders are replacing their old machines with multi-process welders each year. The cost- and space-saving benefits make them the ideal choice for anyone who uses more than one process...