Steelmax M2AL HSS Annular Cutter 1" Depth (SM-AC-XXXXX-1)
Select Size (Parts & Accessories):
Select Size (Parts & Accessories)
Quantity:
Steelmax offers some of the best quality high speed steel (HSS) annular cutters for all of your hole-making needs. All Steelmax annular cutters have standard Weldon shanks of 3/4" for cutters up to 2-3/8" and 1-1/4" shank for cutter diameters above 2-3/8". As a result, Steelmax cutters will fit and improve the performance of any mag drill.
All Steelmax cutters ship with a pilot pin installed at no extra charge. Please see "specs" tab for all sizing and part number references.
Annular Cutter Advantages Over Twist Drills
• Eliminates costly and time consuming step-drilling
• Significantly less drilling time (3-4 times faster)
• Longer tool life (5-10 times more holes per cutter)
• More accurate and higher quality holes
• Easily drill on curved surfaces like pipe and tubing
• Create overlapping holes
Steelmax HSS cutters utilize an M2AL (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and is less brittle compared to those using a cobalt additive. HSS cutters are most cost effective for mild steel applications and holes up to 2-3/8" in diameter in material up to 1" thick. HSS cutters can also be re-sharpened to extend cutter life.
Steelmax high-performance cutting fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. The Steelmax brand cutting fluid is a water-based cutting fluid that is bio-degradeable and does not require time-consuming cleanup prior to welding or assembling parts.
All Steelmax cutters ship with a pilot pin installed at no extra charge. Please see "specs" tab for all sizing and part number references.
Annular Cutter Advantages Over Twist Drills
• Eliminates costly and time consuming step-drilling
• Significantly less drilling time (3-4 times faster)
• Longer tool life (5-10 times more holes per cutter)
• More accurate and higher quality holes
• Easily drill on curved surfaces like pipe and tubing
• Create overlapping holes
Steelmax HSS cutters utilize an M2AL (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and is less brittle compared to those using a cobalt additive. HSS cutters are most cost effective for mild steel applications and holes up to 2-3/8" in diameter in material up to 1" thick. HSS cutters can also be re-sharpened to extend cutter life.
Steelmax high-performance cutting fluid should be used with all annular cutters for optimal cutting performance and to extend cutter life. The Steelmax brand cutting fluid is a water-based cutting fluid that is bio-degradeable and does not require time-consuming cleanup prior to welding or assembling parts.
MPN: SMTSM-AC-
From The Blog
Engine-Driven Welders
Portable Power: Discover the Bobcat 230
All dressed up with nowhere to go. That’s a phrase you usually don’t hear in the welding world, despite how often it applies. You see, you might be decked out in top-of-the-line gear, with the skil...
MIG
The Exact Step-By-Step Guide to MIG Welding
You could read every single guide on the internet about MIG welding but still have no idea how to turn the machine on. That’s because very few articles cover the exact steps you should take. The un...
General
Will Smartphone Integration Drastically Affect Welding?
Nowadays, everything can be connected to your smartphone. It can run your Netflix, your AC, your house lights—heck, some smartphones can even talk to your mom on her birthday while you sit back and...