Skip to content
Thermal Arc 186 AC/DC TIG and Stick Welder Package with Foot Control (W1006301 & W4013200)
The Thermal Arc 186 AC/DC TIG and Stick Welder Package (W1006301) with Foot Control (W4013200) is a complete Stick and TIG solution that is ready for any application; aluminum fabrication, maintenance and repair, automotive, and any other setting where you need portable welding capabilities.
TIG
AC and DC output: for aluminum and non-ferrous alloys, stainless, mild steel and chrome molys.
AC Frequency: Adjustable frequency of the AC square wave when welding on aluminum for optimized set up (15 Hz - 150 Hz).
Wave Balance: Adjustable Adjustable for optimized penetration or cleaning action when welding on aluminum.
HF Arc Start: Provides non-contact arc starting that eliminates tungsten or material contamination.
Lift TIG Start: Provides optimized TIG arc starting without the use of high frequency.
Pulse: Changes the weld current from high to low at a specified frequency, reduces heat input on thin material.
Preflow & Postflow: Enables independent control over shielding gas before and after the weld.
Upslope/Downslope & Crater modes: Eliminates cracking at the end of the weld.
Hot Start: Ensures fusion at arc starts for both TIG and Stick processes.
Stick
Adjustable Arc Force and Hot Start Control: for optimum Stick electrode performance.
Comes complete with:
• Thermal Arc 186 AC/DC Power Supply
• Foot Control (W4013200)
• Tweco 200 Amp Ground Clamp with 10 ft (3m) lead
• Tweco 200 Amp Electrode Holder with 13 ft (4m) lead
• 4 general purpose stick electrodes (E6013)
• TIG Torch and Accessories, 26 style with integrated controls (3 control modules included), 13 ft (4m)
• Victor Argon Flow Gauge and 12.5 ft (3.8m) hose
• Operators Manual and CD
• Shoulder Strap
TIG
AC and DC output: for aluminum and non-ferrous alloys, stainless, mild steel and chrome molys.
AC Frequency: Adjustable frequency of the AC square wave when welding on aluminum for optimized set up (15 Hz - 150 Hz).
Wave Balance: Adjustable Adjustable for optimized penetration or cleaning action when welding on aluminum.
HF Arc Start: Provides non-contact arc starting that eliminates tungsten or material contamination.
Lift TIG Start: Provides optimized TIG arc starting without the use of high frequency.
Pulse: Changes the weld current from high to low at a specified frequency, reduces heat input on thin material.
Preflow & Postflow: Enables independent control over shielding gas before and after the weld.
Upslope/Downslope & Crater modes: Eliminates cracking at the end of the weld.
Hot Start: Ensures fusion at arc starts for both TIG and Stick processes.
Stick
Adjustable Arc Force and Hot Start Control: for optimum Stick electrode performance.
Comes complete with:
• Thermal Arc 186 AC/DC Power Supply
• Foot Control (W4013200)
• Tweco 200 Amp Ground Clamp with 10 ft (3m) lead
• Tweco 200 Amp Electrode Holder with 13 ft (4m) lead
• 4 general purpose stick electrodes (E6013)
• TIG Torch and Accessories, 26 style with integrated controls (3 control modules included), 13 ft (4m)
• Victor Argon Flow Gauge and 12.5 ft (3.8m) hose
• Operators Manual and CD
• Shoulder Strap
| MPN: | THAW1006301, THAW4013200 |
|---|
MPN: THAW1006301, THAW4013200
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Helmets
Is the Miller T94i-R PAPR System Worth It?
Let’s drop a hard truth: In the welding world, an experienced welder is worth more than 20 beginner welders. This is often directly reflected in the pay for welders. Some highly skilled welders can...
MIG
Everything You Should Know About the New Millermatic 211 PRO
The Millermatic 211 is dead; long live the Millermatic 211 PRO. That’s right, possibly the best-selling MIG machine in history now has a successor. In this article, we’ll cover everything you need ...
General
Miller’s Top Multi-Process Machines
More and more welders are replacing their old machines with multi-process welders each year. The cost- and space-saving benefits make them the ideal choice for anyone who uses more than one process...