Skip to content
Tweco Fabricator 252I MIG, TIG, Stick Welder Pkg. with Cart (W1004402)
The Tweco Fabricator 3-in-1 252i Welding System (W1004402) features MIG, Stick, and TIG welding capabilities; all in a portable package. Weighing in at only 66 lbs, this integrated platform has automatic input voltage selection from 208-230 VAC and an operating range of 187 - 276 VAC.
MIG:
• Infinite Voltage Control with optimized starting performance.
• Inductance Control for arc stability and spatter control.
• Tweco MIG Gun w/15 ft. cable and industry standard Tweco #4 connection.
• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• 4", 8", or 12" Spool capacity allows easy installation of wire spool sizes.
• Spool Gun ready
STICK:
• Adjustable Arc Force Control for optimum STICK electrode performance.
• Excellent 6010 welding electrode performance.
TIG:
• Lift TIG Start: Provides TIG arc starting without use of high frequency.
Other Features:
• PFC Power Factor Correction: Up to 40% more electrically efficient than conventional MIG Welders.
• Digital Meters: Voltage and Amperage; Preview and Hold capability.
• Excellent Portability: Lightweight, less than 66 lbs.
• Comprehensive Setup Chart: Weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates operator fatigue.
• Remote Receptacle: Enables connection of remote control devices and Spool Gun.
• Quick Change Polarity: Simple quick change polarity (no tools required) from the front of the power source.
• Overload Protection: Shuts down the power source to protect the internal electrical components from overheating.
• IP23S: Suitable for outdoor use.
• Advanced Features: Includes Pre & Post Flow, Down Slope, Hot Start, Spot, Stitch, Burn Back, Wire Sharp, Arc Hour
Includes:
• Fabricator 252i Power Supply
• Tweco WeldSkill 200 Amp Ground Clamp with 10 ft (3 m) Lead
• Victor EDGE Argon Flow Gauge
• Tweco WeldSkill 200 Amp Electrode
• Outlet Guide, .023" (0.6mm)
• 15 ft (4.6 m) Tweco Fusion 250 Amp MIG Gun
• Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
• 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
• Operator’s Manual
• Single Cylinder Professional Cart
• Holder with 13 ft (4 m) Lead
Drive Rolls:
• .035" / .045" V Groove Lower & Flat Upper (Fitted)
• .023" / .030" / .035" V Groove
• .045" Flux Cored Roll
Contact Tips (1 each):
• .030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
MIG:
• Infinite Voltage Control with optimized starting performance.
• Inductance Control for arc stability and spatter control.
• Tweco MIG Gun w/15 ft. cable and industry standard Tweco #4 connection.
• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• 4", 8", or 12" Spool capacity allows easy installation of wire spool sizes.
• Spool Gun ready
STICK:
• Adjustable Arc Force Control for optimum STICK electrode performance.
• Excellent 6010 welding electrode performance.
TIG:
• Lift TIG Start: Provides TIG arc starting without use of high frequency.
Other Features:
• PFC Power Factor Correction: Up to 40% more electrically efficient than conventional MIG Welders.
• Digital Meters: Voltage and Amperage; Preview and Hold capability.
• Excellent Portability: Lightweight, less than 66 lbs.
• Comprehensive Setup Chart: Weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Trigger Control: 4T (Latch) eliminates operator fatigue.
• Remote Receptacle: Enables connection of remote control devices and Spool Gun.
• Quick Change Polarity: Simple quick change polarity (no tools required) from the front of the power source.
• Overload Protection: Shuts down the power source to protect the internal electrical components from overheating.
• IP23S: Suitable for outdoor use.
• Advanced Features: Includes Pre & Post Flow, Down Slope, Hot Start, Spot, Stitch, Burn Back, Wire Sharp, Arc Hour
Includes:
• Fabricator 252i Power Supply
• Tweco WeldSkill 200 Amp Ground Clamp with 10 ft (3 m) Lead
• Victor EDGE Argon Flow Gauge
• Tweco WeldSkill 200 Amp Electrode
• Outlet Guide, .023" (0.6mm)
• 15 ft (4.6 m) Tweco Fusion 250 Amp MIG Gun
• Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
• 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
• Operator’s Manual
• Single Cylinder Professional Cart
• Holder with 13 ft (4 m) Lead
Drive Rolls:
• .035" / .045" V Groove Lower & Flat Upper (Fitted)
• .023" / .030" / .035" V Groove
• .045" Flux Cored Roll
Contact Tips (1 each):
• .030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
| MPN: | THAW1004402 |
|---|---|
| UPC: | 822635021393 |
MPN: THAW1004402
UPC: 822635021393
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
TIG
Syncrowave 212: Is It a Worthy Successor to Miller’s Beloved TIG welder?
TIG welding is like patting your head while rubbing your belly, while also doing a Rubik's cube with your feet and whistling Yankee Doodle. Simply put, you’ve got a lot going on while TIG welding (...
Helmets
Is the Miller T94i-R PAPR System Worth It?
Let’s drop a hard truth: In the welding world, an experienced welder is worth more than 20 beginner welders. This is often directly reflected in the pay for welders. Some highly skilled welders can...
MIG
Everything You Should Know About the New Millermatic 211 PRO
The Millermatic 211 is dead; long live the Millermatic 211 PRO. That’s right, possibly the best-selling MIG machine in history now has a successor. In this article, we’ll cover everything you need ...