$20 Off Orders Over $500: Code WELD20 | $40 Off Orders Over $1,000: Code WELD40 | $60 Off Orders Over $2,000: Code WELD60 | $200 Off Orders Over $7,000: Code WELD200

*excludes Hypertherm

Thermal Dynamics Cutmaster 58 Plasma Cutter (1-5830-1)

5.00 / 5 stars with 47 reviews
In stock
$2,799.00 $2,199.00
+ Free Shipping! (Save $600.00)
Light industrial jobs? This one's for you.
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Receive a $100 rebate from ESAB when you purchase this machine! Click the banner to download ESAB's latest rebate flyer for additional details!

The Thermal Dynamics Cutmaster 58 Plasma System (1-5830-1) has been designed with the idea that recommended cut capacity should also be the true cut capacity. Makes sense, doesn't it? This thinking eliminates the need to "buy up" or feeling like you have to buy a machine more powerful than you need. That means, when Thermal Dynamics says the Cutmaster 58 will cut one-half inch material, it will cut it all day, every day; no exceptions. The Cutmaster 58 is the most powerful and lightest weight 1/2 inch machine on the market today and the only system that offers the precision of the True Cut Drag Tip Series. The 60 Amp tip allows the system to drag cut up to 1/4 inch with ease, giving the absolute best cut quality possible on mild, stainless, or aluminum.

• TRUE GUARD roll bar provides easy transportation and protects the front and rear of the power supply for unmatched durability.
• Color Coded LED’s indicate pressure status and setup errors.
• All user controls are conveniently located on the front panel
• Lightweight design improves portability (Reduced nearly 50%).
• Trigger latch feature prevents hand fatigue during long cuts. Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
• Multiple Torch Capability (Hand, Mechanized, Automation)
• The Industry's only 60 Amp Drag Tip
• Convenient storage compartment for spare and consumable parts
• Universal selectable input power from 208 to 460 VAC + 10%, single or three phase, 50 or 60 Hz.
• Power Supply
• 20 ft. (6.1m) Lead
• 1Torch SL60QD, 75 deg. Head
• 10 ft. (3.0m) Input Power Cable 1Ph with 230V (NEMA 6-50P) plug
• Work Cable and Clamp
• Spare Parts Kit
• Operating Manual
Warranty: 4 years

Features and benefits:
• Front Panel LEDs indicate status conditions for maximum efficiency.
• Storage compartment for convenient access to spare parts and consumables.
• Versatile 1Torch with ATC disconnect makes it easy to add lead extensions or convert to a machine torch.
• True Guard roll bar provides easy transportation and protection for unmatched durability.
• Multi-voltage allows operation from 208 to 480 Volts in a single power supply.
• Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
• Lighter weight design for maximum portability

More Information
Brand Thermal Dynamics
SKU ITHE00000032
MPN ESB1-5830-1
Mfgs MPN 1-5830-1
UPC 699488025942
Prop65 Yes
Manufacturer's Warranty 4 Years
Max Amperage Output 60
Usage Light Industrial
Input Voltage 208, 230, 400, 600
Duty Cycle 100%
Duty Cycle 100% at 30A
Rated Cut 1/2 inch
Rated Sever Cut 1 1/8 inch
Portability 43 lbs
Phase Both
Skill Level Weekend Warrior, Career Welder
Process Plasma
Discontinued Product No
Awesome! 5 I'm very happy w/ this unit!
Outstanding Peice of Equipment 5 Worth every penny!
great price. fast delivery. 5 Very happy with the 52 plasma everything that was advertised. Best price. Quick delivery. What more can you ask for on a internet purchase?
I'm Totally Impressed with the Cutmaster 52 5 I've hardly used the unit that I recently purchased but I'm very familiar with the Cutmaster 52. I recently graduated from a two-year welding and fabrication program at a local community college and the '52 is the plasma cutter we students learned to cut with. It's tough! The unit that the school provided has survived use by about forty student learners per college quarter whose welding skills ranged from absolute beginner to certified welder. As you can probably imagine, any piece of equipment used in an academic environment has got to be tough to survive the unintentional abuse and mistreatment it'll be subjected to. The '52 in use at the school has been in place for several years and has never failed. It cuts like a champ too. I used it to cut a ton of steel and aluminum while honing my skills at school and I was so impressed by its capabilities that, after looking at and comparing price and capabilities of other Cutmaster models and the plasma cutters offered by other manufacturers as well, I went and bought a Cutmaster 52 for myself. I'm confident that the one I own will do everything that I expect of it, and more.
cut master 52 5 only had it about 2 weeks but so far so good looks well built we have cut 3/16-3/8" with it
TD Cutmaster 52 is the bomb! 5 I started working as a metal artist in 2001. I purchased a TD Cutmaster 50 and produced some great art and sculptures with it. It served me well until just recently when it gave up after 15 years of hard labor. Actually, it was only the torch that gave out. During all those years, I never had one problem with that machine. Now I have the Cutmaster 52 and it is a far superior machine to the 50. This is the smoothest cutting torch I’ve ever used and I’ve experienced cutting with many other brands that my friends own. The setting for expanded metal is amazing. I believe the consumables even last longer because I’ve done a lot of cutting since I’ve gotten this machine and the electrode is still in good shape. So far, I believe this machine will surpass all my expectations. Thanks for putting out such a great product at a reasonable price. TD is the best.
owner 5 Great machine for the money. Right out of the box, set it up watched dvd and was cutting like a pro. Probably cut about 200' on first project. follow instructions and you'll do fine.
Thermal Dynamics 52 plasma cutter 5 I just received it this week. Delivery was very prompt. I have only used it a few times. I cut out 3/8" thick reinforcing plates to repair a front end loader. I also cut up a number of patterns while making pig planters from propane bottles. I have never used a plasma cutter before, but this one was easy to set up and use. Makes fast, clean cuts as advertised. Next week I will be using it to cut 3/4" plate.
I own 2 of these their awesome !! 5 I own 2 of these their awesome !!
Awesome 5 Great machine, easy to set up and use. I also bought some accessories for this machine and one of the parts had a manufacturing defect. Customer service was very helpful and easy to work with
Better than comparable Hobart/Miller 5 The good: Very powerful. Went through my asphalt driveway because I wasn't high enough off the ground for my first cut. Quality components other than noted below. Will it last? Well, the warranty is longer than Miller's so who cares. I like the adjustable regulator, gives my crappy air compressor some relief for thin material. The "bad": Fan operation seems overkill for the amperages I was using (compared to my Miller Diversion TIG), but doesn't bother me. Case fitment is a bit weird looking but otherwise fine (doesn't look as professional as Miller/Hobart). Instructions are good, but they neglect to mention much about the "HI/LO" voltage switch on the back. DVD that comes with it is nearly useless. Videos are cut short cutting off the narrator mid-sentence. Other thoughts: Difficult to fit in the cheap, angled HF welder/plasma cutter cart due to the way the handles wrap around on the bottom, but that can be fixed by a few plasma cuts on the cart. Wish it came with the air filtering add-on it recommends as I have a HF air compressor I don't trust--but no biggy.
Cutmaster52 5 Very satisfied with operation and results. Easy to use and set up.
Ranch owner 5 came in a day sooner than expected sales staff very helpful. Haven't used it very much as of yet but it has cut aluminum drill stem and 3/8 inch channel. Works like a charm
Haven't had a chance to 5 Haven't had a chance to use it very much at this point, however when I've used it - it worked great.
Thermal Dynamics cutmaster 52. 5 After figuring things out and doing some playing with it I am VERY pleased with it. Works great.
Couldn't Ask for a Better Machine. 5 I purchased a cut master 52 from this company. They had the best price in the country plus free shipping. I got my machine in about a week and right out if the box it's ready to start cutting. I never even used a plasma cutter before yet had no problems at all cutting thick metal. It easily cuts 1/2 inch steel plate. The drag tip is. Awesome!!! A must buy if you are in the market for a plasma cutter.
Cutmaster 52 5 Works great!
Thermal Dynamics Cutmaster 52 Plasma Cutter 5 Great value for a great machine.
Awesome deal 5 Product was as described works great
Wow.. Great Tool Great Svc. 5 I'm a builder / remodeler, 1st timer doing a shipping container home, w/ no idea what was needed for cutting the openings in metal box, and very little experience working with steel. Knowing most of the steel was less than an 1/8" thick but the supporting members are much thicker I elected to not take chances on being able to cut what ever I needed too, both in existing and reinforcement needed to replace cut outs.. this machine cut everything very quickly and very easily... setup was simple and I received my unit w/in 2 days of purchase.. Thx guys !
TD CutMaster 52 Green Machine! 5 I do a lot of fabrication side work. This machine has done everything I needed it too. Will slice 1/4-1/2 plate all day. I repair a lot of ag equipment, trailers, 4x4 projects, etc. Very happy with this product. Pick up a consumable kit and a few extras and you will be set. Shipping was prompt, no damage, and fired it up right out of the box. Im at the point were this machine has paid for itself.
Great machine great customer service 5 I ordered the thermal dynamics cut master 52, it turned up quickly but unfortunately had some cosmetic damage, the box was factory sealed so both IOC and I were confused how the damage got through quality control. IOC didn't have another in stock and immediately offered me a full refund. The only problem, I had a job that this machine was ordered for and didn't have time to return it and order from somewhere else. As it was cosmetic only, I decided to keep the machine. IOC spoke to thermal dynamics on my behalf and sent them the pictures of the damage. A couple of weeks later a box from thermal dynamics/IOC arrived full of consumables and accessories as an apology. I appreciate good customer service like this. As for the machine it's a beast it cuts 1/4 inch steel plate like a hot knife through butter, it's massively speeded up how quickly we can turn cutting and welding jobs around and the fact that it will run on single phase 220 and from a generator out in the field is a real bonus.
Great price 5 Best price found anywhere, shipped fast.
Awesome product at a great 5 Awesome product at a great price. Fast shipping, what more could one hope for? A++
it's a Christmas present 5 it's a Christmas present
Cutmaster 57 5 So far I am very happy with this macine
Cut master 58 5 Does what is described to do and then some. Very easy out of the box set up and operation. Definitely would recommend
Great machine 5 Highly recommended to anyone looking for a plasma cutter for above beginner use and mild professional use. Love this machine
Loving it 5 I do not have many hrs on it yet but real easy to set up and use
one of the best plasma 5 one of the best plasma cutter I ever used love the long torch can get around to cut can ask for any better good price too thanks welding supplies
Big Boys Toys 5 Great Unit great service
Great machine very happy with 5 Great machine very happy with quality
Best plasma cutter I ever 5 Best plasma cutter I ever bought
Cutmaster 58 5 The Cutmaster 58 cuts 1/2" plate just like they say it does. Love it!!!
Nice machine 5 Easy setup Nice manual The $150 rebate on top of sale price was great
Great plasma cutter 5 This plasma cutter works better than the 60 amp Hypertherm unit I use at work. Way cheaper too.
Worked well for the project 5 Worked well for the project I had to complete. Easy to setup. Cut though 1/2” plate with out any trouble.
Good 5 Good
Great little machine at a 5 Great little machine at a nice price! We use it on a pipe coupon beveling set up; works great....... hope it runs like new for a long time!
I have not had an 5 I have not had an opportunity to do very much cutting with the Cutmaster 58 but what I have used it so far is great. I have purchased several things from IOC and am impressed with the service provided. Always get a quick response when I contact the company.
Great machine from a great dealer! 5 This machine makes cutting .125” 308 SS a snap, and cut my layout time in half. IOC was quick to deliver with no delays or hassles.
I haven't used it yet, 5 I haven't used it yet, but would like to complement IOC for the 1)ease of purchase 2)quick delivery 3)Good price
Setup was easy and easy 5 Setup was easy and easy to understand!
Performed as expected,,, very good. 5 Performed as expected,,, very good.
Quick Delivery 5 Arrived on time and as expected.
So far so good. There 5 So far so good. There was a little glitch the one time. Shut it off and unplugged it. Pluggged it back in and turn it back on and all was good.

Got a Question?

Give us a call. We're glad to help

Copyright © 2023 WELDING SUPPLIES FROM IOC. All Rights Reserved.