$20 Off Orders Over $500: Code WELD20 | $40 Off Orders Over $1,000: Code WELD40 | $60 Off Orders Over $2,000: Code WELD60 | $200 Off Orders Over $7,000: Code WELD200

*excludes Hypertherm

ESAB Rebel EMP 215ic Welder with Spoolgun and Foot Control (0558102240)

5.00 / 5 stars with 8 reviews
In stock
$3,943.08 $3,295.00
+ Free Shipping! (Save $648.08)
 
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Receive a $150 rebate and a FREE Swarm A30 Welding Helmet from ESAB when you purchase this machine! Click the banner to download ESAB's latest rebate flyer for additional details!

Shop with confidence from an authorized ESAB Rebel distributor!

The ESAB Rebel EMP 215ic MIG/Stick/TIG Welder (0558102240) will blow your socks off with its unprecedented sMIG technology. sMIG is an exclusive, dynamic arc control that constantly monitors complex arc characteristics adapting to your technique to provide a smooth and superior weld. The Rebel features 2 modes: basic and advanced. Basic mode allows you to set wire diameter and material thickness & you're ready to pull the trigger. The advanced mode gives you full control over all arc characteristics. The research and technology put into this machine is truly astounding (you can even access your correct consumable part numbers and user manual on the 4.3" LCD screen). Like ALL other multiprocess units on the market, this is a DC only machine and will not TIG weld aluminum.

Features
• sMIG technology
• 4.3-in Color LCD Display
• 120V/230V Dual Input Voltage
• Weld parameter storage
• Hot start (Stick mode only)
• Arc Force (Stick mode only)
• Lift arc (TIG mode only)
• Trigger lock (2T, 4T)
• Voltage trim adjustment (MIG mode only)
• Inductance adjustment (MIG mode only)
• Burn back adjustment (MIG mode only)
• Pre-flow/post-flow adjustment (MIG mode only)

Quick Specs
• Input Power: 120V/230V
• Current Range: 5-150A (120V), 5-240A (230V)
• Wire Diameter Capacity: .023"-.045"
• Weight: 40lbs
• Dimensions: 16" H x 9" W x 23" D
• Max Plate Thickness: 3/8"
• Generator Requirement: 3.7 kVA (110V) | 7.5 kVA (230V)
• Warranty: 3 years on power source, 1 year on torch

Comes Complete With
• Power Source
• 10-foot Tweco Fusion 180 MIG gun
• 13-foot Tweco 200A electrode holder
• Tweco ground clamp with leads
• Spare MIG gun parts kit, including contact tips & drive rolls
• Four general purpose 6013 stick electrodes
• ESAB 70S-6 .030 4-in 2-lb sample spool
• Tweco TIG torch (W4013802) & accessories
• Victor argon flow gauge regulator with 12.5-foot gas hose
• 120V & 230V adapter plugs
• 12 foot Tweco Spoolgun
• 15 foot Remote Foot Control
CUSTOMERS ALSO BOUGHT:
More Information
Brand ESAB
SKU IESB20160013
MPN ESB0558102240_THA10271397_W4014450
Mfgs MPN 0558102240_SG160REB123035_W4014450
Prop65 Yes
Material Mild Steel, Stainless Steel
Process Flux Cored (FCAW), MIG, Stick, TIG
Max Amperage Output 240
Usage Home/Hobby, Industrial, Light Industrial
Phase Single Phase
Manufacturer's Warranty Yes
Polarity DC
Duty Cycle 30%
Duty Cycle 25% @ 205A on 240V
Portability 40 lbs
Skill Level Beginner, Weekend Warrior, Career Welder
Input Voltage 120, 230
Discontinued Product No
Great machine so far 5 Easy-to-use!!! So far I've only used the mig and stick parts of it but I will be using the tig and spool gun soon
Look! I bought a 215IC EMP 5 I don't write reviews, don't have time. However, to my fellow brothers, take it from a guy who learnt welding in school 1974-78. If you are on the fence about a MP machine, and the choices are overwhelming, don't even waste 5 minutes, of your time. I going to save you the frustration. Look BUY this welder! Even if you are a hobbyist or a DIY guy. This machine will make your work look like ANY pro welder, no BS, I'm on cloud 9 and couldn't wait to share. Hell I got my 1996 Chevy truck with a broke off starter boss on the cast block to paddle and flow with 6011! And it's holding and the hi-torque starter is working away. Don't F- around and rack your brain trying to make up your mind, buy This one! I don't know these people from Adam, I just know that I have used every welder known and by FAR this ESAB is the S..t! The only hang up is they use a proprietary 8 pin connection for the pedal and gun trigger switch, so I had to find the schematic online and get the pin-out #2 and #3 are the feed switch, I want to use my pedal and wish they made a plug and play connector to adapt the standard Millr or Link foot control. So ESAB how about being cool and send me a blank 8 pin male connector so I can convert my pedal .nobody has such a animal in Portland. Chuck H. Beaverton Or. n
Perfect 5 Shiping was fast and the product arrived in perfect condition
Esab 5 I didn't have much to go on besides the videos on Youtube from weld.com..ZZZZ(promotion much?) BUT..Best flux-core mode welder I have ever had the displeasure of using. The flux-core function makes welds that look like they were done with shielding gas. So nice in a gas-less pinch or if you need to remain more portable. The sMIG function is a great no-guess. Where I got perfect welds within minutes of hooking up gas. I have not tried tig or spool-gun as of yet. Love the illuminated screen in the dark shop. It can be seen all the way on the other side of the shop if needed. Welder is fairly heavy in a solid little package and at first was curious what it looked like inside the panel. Very stout and well supported components on the interior which should sustain some banging around.(mostly caused by the delivery from FEDex, UPS). Still getting used to the Tweco gun this comes with. It has different consumables but are not too expensive to arm yourselves with. This Tweco design is a little different to clean as the gas-shield cup does not slide off like other designs, but rather is attached to the gas emitter?? by a section of fire-retardant. So you have to use a little curved scratch-owl to loosen the debris up inside of it. I've used it now for a fair amount of welding time and doesn't even show any melted slag either on the cup of the tip. Like it very much so far.
Esab emp 215ic 5 I bought this welder because it will run E6010 electrode on a small multi process machine, so far I have only ran stick E6010 5p+ and flux core on 110, haven’t been disappointed. Still waiting for 230 in shop. The only problem I had wasn’t with the machine, the tweco flux core contact tip holder and insulater I bought from a local ws wouldn’t seat the contact tip so had to make a .025 shim. I can’t say enough about IOC service and support, great!
Great machine 5 Above and beyond machine I love it
EXCELLENT! 5 EXCELLENT!
Great machine, just as described 5 Great machine, just as described

Got a Question?

Give us a call. We're glad to help

866-854-7380
Copyright © 2023 WELDING SUPPLIES FROM IOC. All Rights Reserved.