Lincoln Magnum Pro Curve 300 Ready Pak (K2951)
Liner & Connector Kit:
Liner & Connector Kit
Quantity:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The Magnum Pro Curve 300 series MIG guns feature a lightweight curved handle along with a rotating gun tube for those tight spaces. These guns are suitable for MIG, Flux-Cored (FCAW), and Pulsed MIG operations.
Please select the appropriate liner and connector kit in the drop-down box.
K466-6 Connector Kit works with Power Mig Series and Power Wave C300.
K466-10 Connector Kit works with LF-72, LF-74, LN-25 PRO, Power Feed 10 and 25 Series.
Features
• Duty Cycle: 60% @ 200A (Mixed Gas) | 60% @ 300A (CO2)
• Wire Diameter: .025 - 5/64
• High Quality Copper Parts
• Curve Handle Design
• Rotating Gun Tube
• Gun Hanger Clip
Includes
• Magnum Pro Curve 300 Gun (choose desired length)
• Select Liner (.035-.045 or .052-1/16)
• Select Connector Kit (K466-6 OR K466-10)
• (1) KP2744-045 Contact Tip
• (1) .0625 Thread On Nozzle with 1/8" Recess (KP2742-1-62R)
• (1) Thread-On-Diffuser (KP2746-1)
Please select the appropriate liner and connector kit in the drop-down box.
K466-6 Connector Kit works with Power Mig Series and Power Wave C300.
K466-10 Connector Kit works with LF-72, LF-74, LN-25 PRO, Power Feed 10 and 25 Series.
Features
• Duty Cycle: 60% @ 200A (Mixed Gas) | 60% @ 300A (CO2)
• Wire Diameter: .025 - 5/64
• High Quality Copper Parts
• Curve Handle Design
• Rotating Gun Tube
• Gun Hanger Clip
Includes
• Magnum Pro Curve 300 Gun (choose desired length)
• Select Liner (.035-.045 or .052-1/16)
• Select Connector Kit (K466-6 OR K466-10)
• (1) KP2744-045 Contact Tip
• (1) .0625 Thread On Nozzle with 1/8" Recess (KP2742-1-62R)
• (1) Thread-On-Diffuser (KP2746-1)
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
The Welding Hazards No One Talks About
Howard had been welding for more than a decade. But tonight, he was at home, watching a movie with his wife on the couch. In the movie, a background character picked up a welding torch and struck a...
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...
TIG
The Ultimate Review of the Square Wave TIG 200
Flagships: Some people think they’re just cursed. The Titanic was the flagship meant to change how we traveled the seas. The Hindenberg was a flagship meant to change how we traveled the skies.
So ...