Miller Millermatic 255 Pulsed MIG Welder Auto Pkg (208/240V) (951821)
The Miller Millermatic 255 Pulsed MIG Auto body package is built exclusively to handle OEM repair procedures. This single-phase weld package produces quality repairs on all of today's multi-material vehicles, which require various welds such as steel, silicon bronze and aluminum. The Millermatic 255 has a 350 amp capability and a 60% duty cycle at 230 amps.
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set Elite
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings.
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line Technology
For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility
Capabilities include MIG, pulsed MIG and flux-cored welding.
Portability - Machine only weighs 84 lb.
Weight is reduced by more than 50 percent compared to the Millermatic 252.
Optional EZ-Latch running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
WHAT'S INCLUDED
• Power source with 10 ft. (3 m) power cord
• 15 ft. (4.5 m) 250-Amp MDX 250 MIG Gun for steel wire
• 10 ft (3 m) 100-Amp MDX 100 MIG Gun for silicon bronze wire
• 12 ft (3.7 m) 200-Amp Bernard BTB Gun for aluminum wire
• 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector
• Flow gauge regulator and gas hose for argon or AR/CO2 mix
• .024 V-Groove drive rolls for steel wire
• .030/.035 Reversible V-Groove drive rolls for steel and silicon bronze wire
• .035/.047 Reversible U-Groove drive rolls for aluminum wire
• MDX Consumables for .024/.030/.035 wire
• BTB Centerfire Consumables for .047 aluminum wire
• 8 in./10 lb spool of .030 steel wire
• 8 in./5 lb spool of .035 silicone bronze wire
• 8 in/5 lb spool of .047 5554 aluminum wire
• Material Thickness Gauge
• EZ-Latch Dual Cylinder Cart with Elevated Gun and Cable Rack
• Chains to secure gas cylinder
• Protective Cover (301524)
•Millermatic setup guide
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set Elite
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings.
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line Technology
For portability and reliability this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility
Capabilities include MIG, pulsed MIG and flux-cored welding.
Portability - Machine only weighs 84 lb.
Weight is reduced by more than 50 percent compared to the Millermatic 252.
Optional EZ-Latch running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
WHAT'S INCLUDED
• Power source with 10 ft. (3 m) power cord
• 15 ft. (4.5 m) 250-Amp MDX 250 MIG Gun for steel wire
• 10 ft (3 m) 100-Amp MDX 100 MIG Gun for silicon bronze wire
• 12 ft (3.7 m) 200-Amp Bernard BTB Gun for aluminum wire
• 10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector
• Flow gauge regulator and gas hose for argon or AR/CO2 mix
• .024 V-Groove drive rolls for steel wire
• .030/.035 Reversible V-Groove drive rolls for steel and silicon bronze wire
• .035/.047 Reversible U-Groove drive rolls for aluminum wire
• MDX Consumables for .024/.030/.035 wire
• BTB Centerfire Consumables for .047 aluminum wire
• 8 in./10 lb spool of .030 steel wire
• 8 in./5 lb spool of .035 silicone bronze wire
• 8 in/5 lb spool of .047 5554 aluminum wire
• Material Thickness Gauge
• EZ-Latch Dual Cylinder Cart with Elevated Gun and Cable Rack
• Chains to secure gas cylinder
• Protective Cover (301524)
•Millermatic setup guide
MPN: | MIL951821 |
---|---|
UPC: | 715959675536 |
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
cutting
The Right Way to Start Your Plasma Cuts
“Plasma cutting” and “good plasma cutting” are two entirely different things. “Plasma cutting” is almost as simple as not pointing the nozzle at your face and pulling the trigger. But plasma cuttin...
TIG
The Ultimate Review of the Square Wave TIG 200
Flagships: Some people think they’re just cursed. The Titanic was the flagship meant to change how we traveled the seas. The Hindenberg was a flagship meant to change how we traveled the skies.
So ...
Projects
Sparking Inspiration: Spring Welding Projects To Brighten Your Space
As the flowers bloom and the weather warms up, it's the perfect time to get creative with your welding projects. Whether you're a seasoned welder or just starting out, there are plenty of exciting ...