

3M Speedglas 9100X Auto Welding Helmet (06-0100-20)
The 3M Speedglas 9100X Autodarkening Electronic Welding Helmet is exactly what you need to get the job done. It comes with a full 24 month factory warranty and has a large, 9.12 square inch viewing area. There are sensitivity settings for normal welding to low amp inverter TIG welding, and even a low sensitivity setting for when other welders are working nearby.
Features
• Made from a lightweight yet durable material that meets EN 175 level and ANSI Z87.1-2003 mechanical strength requirements.
• Has a heat-reflecting silver front and increased coverage of the lower neck, offering greater protection from heat and welding sparks. Ears and sides of neck are also better covered with this helmet.
• The new magnifying lens holder, on the inside face of the welding helmet, makes lens installation easier and more adjustable.
• Seven user-selectable dark shades are available: shade 5 for gas welding/cutting, shade 8 for microplasma and low amp TIG welding, and shade 9 to 13 for most other types of arc welding. The tack welding comfort mode uses an intermediate light state (shade 5). If a follow-up arc is not struck within two seconds, the welding filter switches to the normal light state (shade 3).
• The comfort mode helps reduce eye fatigue resulting from the eye constantly needing to adjust to differing light levels during tack welding.
• The delay function allows the user to set the dark-to-light switching time.
• Sensitivity of arc detection can be adjusted to provide reliable switching for a wide range of arc welding processes, amperages, and situations.
• You can "lock-in" any shade (the light shade for grinding or other non-welding activities or one of the dark shades) to have it function as a passive welding filter.
Comes complete with:
• Speedglas 9100 welding helmet
• 9100X auto darkening lens
• helmet storage bag
• Speedglas welding beanie
Features
• Made from a lightweight yet durable material that meets EN 175 level and ANSI Z87.1-2003 mechanical strength requirements.
• Has a heat-reflecting silver front and increased coverage of the lower neck, offering greater protection from heat and welding sparks. Ears and sides of neck are also better covered with this helmet.
• The new magnifying lens holder, on the inside face of the welding helmet, makes lens installation easier and more adjustable.
• Seven user-selectable dark shades are available: shade 5 for gas welding/cutting, shade 8 for microplasma and low amp TIG welding, and shade 9 to 13 for most other types of arc welding. The tack welding comfort mode uses an intermediate light state (shade 5). If a follow-up arc is not struck within two seconds, the welding filter switches to the normal light state (shade 3).
• The comfort mode helps reduce eye fatigue resulting from the eye constantly needing to adjust to differing light levels during tack welding.
• The delay function allows the user to set the dark-to-light switching time.
• Sensitivity of arc detection can be adjusted to provide reliable switching for a wide range of arc welding processes, amperages, and situations.
• You can "lock-in" any shade (the light shade for grinding or other non-welding activities or one of the dark shades) to have it function as a passive welding filter.
Comes complete with:
• Speedglas 9100 welding helmet
• 9100X auto darkening lens
• helmet storage bag
• Speedglas welding beanie
| MPN: | HOR06-0100-20 |
|---|---|
| UPC: | 051131371729 |
MPN: HOR06-0100-20
UPC: 051131371729
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------


From The Blog

Helmets
Which Helmet Should You Buy Based on Your Skill Level?
As a welder, what are your two most important body parts? Wait, let's restate that… What are your two most important body parts for welding? According to the US Department of Labor and Statistics, ...

Welding Machines
How to Use the Lincoln Power MIG 220 Multiprocess Welder
Some of us here at IOC are old. We’re talking “old” like, “back when welding was done by banging two rocks together, and you rode to work on a dinosaur” – back when the 1st multiprocess machine was...

Stick
The Best Features of the Lincoln Square Wave 205
Discover how Lincoln’s new Square Wave 205 improves over its predecessor with a better duty cycle, LCD controls, AC/DC Stick capability & more.


