MTCR8/TG-10

Crown Alloy .045 x 36" CROWN 8 - 10# Steel (ER 80S-D2) TIG 10 lb BOX (MTCR8/TG-10)

$145.00

Quantity:
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Crown 8 (ER 80S-D2) is a premium low-alloy cut length TIG filler metal that contains ½ percent molybdenum (for increased strength) and high levels of manganese and silicon to provide good wetting and good rust and scale tolerance. The higher level of deoxidizers (Mn and Si) help to control porosity. Crown 8 (ER 80S-D2) will yield radiographic quality welds with excellent bead appearance in both ordinary and difficult-to-weld carbon and low alloy steels. Crown 8 is THE recommended TIG alloy for welding 4130 tubing up to .120" wall thickness. The combination of weld soundness and strength makes the Crown 8 suitable for single and multiple-pass welding of a variety of carbon and low-alloy, higher strength steels in both the as welded and postweld heat-treated conditions. Maximum mechanical properties are achieved when using a preheat and interpass temperature of 275OF minimum.

From The Blog

Portable Power: Discover the Bobcat 230
Engine-Driven Welders

Portable Power: Discover the Bobcat 230

All dressed up with nowhere to go. That’s a phrase you usually don’t hear in the welding world, despite how often it applies. You see, you might be decked out in top-of-the-line gear, with the skil...
The Exact Step-By-Step Guide to MIG Welding
MIG

The Exact Step-By-Step Guide to MIG Welding

You could read every single guide on the internet about MIG welding but still have no idea how to turn the machine on. That’s because very few articles cover the exact steps you should take. The un...
Will Smartphone Integration Drastically Affect Welding?
General

Will Smartphone Integration Drastically Affect Welding?

Nowadays, everything can be connected to your smartphone. It can run your Netflix, your AC, your house lights—heck, some smartphones can even talk to your mom on her birthday while you sit back and...