Skip to content
ESAB ET 186i AC/DC TIG & Stick Welder Package w/out Foot Control (W1006301)
The ESAB ET 186i AC/DC TIG and Stick Welder Package (W1006301) is a complete Stick and TIG solution that is ready for any application; aluminum fabrication, maintenance and repair, automotive, and any other setting where you need portable welding capabilities. The 186i can weld up to 3/8" steel or 3/16" aluminum.
TIG
AC and DC output: for aluminum and non-ferrous alloys, stainless, mild steel and chrome molys.
AC Frequency: Adjustable frequency of the AC square wave when welding on aluminum for optimized set up (15 Hz - 150 Hz).
Wave Balance: Adjustable Adjustable for optimized penetration or cleaning action when welding on aluminum.
HF Arc Start: Provides non-contact arc starting that eliminates tungsten or material contamination.
Lift TIG Start: Provides optimized TIG arc starting without the use of high frequency.
Pulse: Changes the weld current from high to low at a specified frequency, reduces heat input on thin material.
Preflow & Postflow: Enables independent control over shielding gas before and after the weld.
Upslope/Downslope & Crater modes: Eliminates cracking at the end of the weld.
Hot Start: Ensures fusion at arc starts for both TIG and Stick processes.
Stick
Adjustable Arc Force and Hot Start Control: for optimum Stick electrode performance.
Quick Specs
• Amperage Range: Tig: 10-200 Amps | Stick 10-170A
• Input Voltage: 208/230 Volts | 50/60 Hz | 1-Phase
• 3 Year Mfg Warranty
• Weight: 48 lbs
• Duty Cycle: 20% @ 200A | 100% @ 90A
Comes complete with:
• ESAB 186 AC/DC Power Supply
• Tweco 200 Amp Ground Clamp with 10 ft (3m) lead
• Tweco 200 Amp Electrode Holder with 13 ft (4m) lead
• 4 general purpose stick electrodes (E6013)
• TIG Torch and Accessories, 26 style with integrated controls (3 control modules included), 13 ft (4m)
• Victor Argon Flow Gauge and 12.5 ft (3.8m) hose
• Operators Manual and CD
• Shoulder Strap
TIG
AC and DC output: for aluminum and non-ferrous alloys, stainless, mild steel and chrome molys.
AC Frequency: Adjustable frequency of the AC square wave when welding on aluminum for optimized set up (15 Hz - 150 Hz).
Wave Balance: Adjustable Adjustable for optimized penetration or cleaning action when welding on aluminum.
HF Arc Start: Provides non-contact arc starting that eliminates tungsten or material contamination.
Lift TIG Start: Provides optimized TIG arc starting without the use of high frequency.
Pulse: Changes the weld current from high to low at a specified frequency, reduces heat input on thin material.
Preflow & Postflow: Enables independent control over shielding gas before and after the weld.
Upslope/Downslope & Crater modes: Eliminates cracking at the end of the weld.
Hot Start: Ensures fusion at arc starts for both TIG and Stick processes.
Stick
Adjustable Arc Force and Hot Start Control: for optimum Stick electrode performance.
Quick Specs
• Amperage Range: Tig: 10-200 Amps | Stick 10-170A
• Input Voltage: 208/230 Volts | 50/60 Hz | 1-Phase
• 3 Year Mfg Warranty
• Weight: 48 lbs
• Duty Cycle: 20% @ 200A | 100% @ 90A
Comes complete with:
• ESAB 186 AC/DC Power Supply
• Tweco 200 Amp Ground Clamp with 10 ft (3m) lead
• Tweco 200 Amp Electrode Holder with 13 ft (4m) lead
• 4 general purpose stick electrodes (E6013)
• TIG Torch and Accessories, 26 style with integrated controls (3 control modules included), 13 ft (4m)
• Victor Argon Flow Gauge and 12.5 ft (3.8m) hose
• Operators Manual and CD
• Shoulder Strap
| MPN: | THAW1006301 |
|---|
MPN: THAW1006301
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
Should You MIG or TIG Aluminum?
Welding aluminum presents unique challenges due to its heat conductivity and oxide layer. Learn the differences between MIG and TIG welding aluminum, when to use each process, and how to achieve st...
cutting
Which FlexCut Machine Is Right for You?
For those of us welders who’ve been around a while, the story of plasma cutting has been a curious tale. At first, consumer-grade plasma machines were finicky and expensive. Most welders trusted th...
Blue Magic® Anti-spatter: High Performance with No Harmful Chemicals
As a trusted partner of the best brands in welding, we work directly with manufacturers every day to ensure our customers get the best products and service. We're excited to share this guest articl...