Hobart AirForce 27i Plasma Cutter with 12ft Torch (500575)
The Hobart AirForce 27i Plasma Cutter with 12ft Torch (500575) is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP). Cut faster and more precise than Oxy Fuel. Thanks to a smaller heat-affected zone you have less warping as well. The 27i comes with a 12 foot torch, ground clamp, and 10 foot power cord, and has a recommended cut rating of 3/8".
Highlights:
• New XT30R Ergonomic Torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
• Multi-Voltage Plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools, simply choose the plug that fits the receptacle.
• Post-flow Air Cooling cools the torch and tip after cutting, extending life of replaceable tip and electrode.
• Fan-On-Demand runs only when needed, reducing dust/debris pulled into unit.
• Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components.
• Cable Management Strap secures torch, work cable and power cord to make transporting easy and convenient.
• Line Voltage Compensation (LVC) provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts.
• Power Factor Correction expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops.
Quick Specs
• Max Cut Capacity: 120V - 3/8" @ 20A | 240V - 5/8" @ 30A
• Duty Cycle: 120V 60% @ 20A | 120V 35% @ 27A | 240V 40% @ 30A
• Weight With Torch: 19 lbs
• Dimensions: 9" H x 5.5" W x 13.25" L
• Air Requirements: 5.0 CFM @ 90-120PSI
Comes Complete With
• XT30R torch with 12ft lead and consumables
• 12 ft heavy duty work clamp
• 10 ft (3 m) power cord with 115/230 VAC, 20 A MVP plug
• Built-In Gas/Air Filter and Regulator
• 5/3/1 Industrial Warranty. Five year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); one year on guns (MIG and plasma torches)
Highlights:
• New XT30R Ergonomic Torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
• Multi-Voltage Plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools, simply choose the plug that fits the receptacle.
• Post-flow Air Cooling cools the torch and tip after cutting, extending life of replaceable tip and electrode.
• Fan-On-Demand runs only when needed, reducing dust/debris pulled into unit.
• Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components.
• Cable Management Strap secures torch, work cable and power cord to make transporting easy and convenient.
• Line Voltage Compensation (LVC) provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts.
• Power Factor Correction expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops.
Quick Specs
• Max Cut Capacity: 120V - 3/8" @ 20A | 240V - 5/8" @ 30A
• Duty Cycle: 120V 60% @ 20A | 120V 35% @ 27A | 240V 40% @ 30A
• Weight With Torch: 19 lbs
• Dimensions: 9" H x 5.5" W x 13.25" L
• Air Requirements: 5.0 CFM @ 90-120PSI
Comes Complete With
• XT30R torch with 12ft lead and consumables
• 12 ft heavy duty work clamp
• 10 ft (3 m) power cord with 115/230 VAC, 20 A MVP plug
• Built-In Gas/Air Filter and Regulator
• 5/3/1 Industrial Warranty. Five year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); one year on guns (MIG and plasma torches)
MPN: | HOB500575 |
---|---|
UPC: | 715959674829 |
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Millermatic 211 Cost, Availability and Accessories
The Millermatic 211 might quite possibly be the best-selling MIG machine of all time. It’s essentially the fine wine of welding equipment: It was revolutionary when it first came out about a decade...
Guide
How to Set Up a Lincoln MIG Welder
Thinking about getting yourself a Lincoln MIG welder? Or maybe you’ve already purchased one and are stoked to lay some beads. Knowing the right way to set up your machine can save you a massive amo...
MIG
Setting up Your Millermatic 211
So, the big Miller box you've been waiting for has finally arrived at your doorstep. Now that the Millermatic 211 is in your hands, how do you set it up? Don't worry; we're here to help you get eve...