Skip to content
Lincoln Flextec 350X (Standard Model) with LF-72 Feeder One Pak (K3438-1)
Download Product Spec Sheet
The Lincoln Flextec 350X multi process welder is easy to setup and simple to operate, yet rugged enough to withstand temperatures up to 131 degrees fahrenheit.
Processes
• Stick
• Flux-Cored
• MIG
• TIG
• Gouging
Features
• Easy process selection
• Fully encapsulated and environmentally protected electronics
• Compatible with across-the-arc, analog, digital, or crosslinc feeders
• Lightweight and portable
• Full functionality without control cables
• Enables remote procedure setting at the feeder
• Voltage reduction device reduces open circuit voltage for added safety
• Capable of arc gouging with 3/16 inch carbons
Power Source Quick Specs
• 380-600 Volt 3 phase power
• Weight - 82lbs (Standard Model) | 77lbs (Construction Model)
• Duty Cycle - 100% at 300 amps | 60% at 350 amps
• Output Range - 5-425 amps
• Dims - 17 in H x 13 in W x 23 L
LF-72 Feeder Quick Specs
• Solid wire range - .023 - 1/16 in
• Cored wire range - .030 - 5/64 in
• Wire speed range - 50 - 800 ipm
• Dims - 12.5 in x 10.0 in x 22.5 in
• Weight - 48.5 lbs
Includes
• Flextec 350X power source (standard model) (K4272-1)
• 8.5 ft power cord (no plug)
• LF-72 bench model feeder (K2327-7)
• 15 ft Magnum pro curve 300 gun (K2951-2-10-45)
• 2 drive roll and wire guide .035-.045 solid wire (K1696-1)
• 10 ft work cable with clamp and 10 ft electrode holder (K1803-2)
• 10 ft Harris flowmeter regulator and hose
Processes
• Stick
• Flux-Cored
• MIG
• TIG
• Gouging
Features
• Easy process selection
• Fully encapsulated and environmentally protected electronics
• Compatible with across-the-arc, analog, digital, or crosslinc feeders
• Lightweight and portable
• Full functionality without control cables
• Enables remote procedure setting at the feeder
• Voltage reduction device reduces open circuit voltage for added safety
• Capable of arc gouging with 3/16 inch carbons
Power Source Quick Specs
• 380-600 Volt 3 phase power
• Weight - 82lbs (Standard Model) | 77lbs (Construction Model)
• Duty Cycle - 100% at 300 amps | 60% at 350 amps
• Output Range - 5-425 amps
• Dims - 17 in H x 13 in W x 23 L
LF-72 Feeder Quick Specs
• Solid wire range - .023 - 1/16 in
• Cored wire range - .030 - 5/64 in
• Wire speed range - 50 - 800 ipm
• Dims - 12.5 in x 10.0 in x 22.5 in
• Weight - 48.5 lbs
Includes
• Flextec 350X power source (standard model) (K4272-1)
• 8.5 ft power cord (no plug)
• LF-72 bench model feeder (K2327-7)
• 15 ft Magnum pro curve 300 gun (K2951-2-10-45)
• 2 drive roll and wire guide .035-.045 solid wire (K1696-1)
• 10 ft work cable with clamp and 10 ft electrode holder (K1803-2)
• 10 ft Harris flowmeter regulator and hose
| MPN: | LINK3438-1 |
|---|---|
| UPC: | 15082823362 |
Download Product Spec SheetBrands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
How to Become a Welder
There are several ways to become a welder. Each option has different pros and cons depending on your specific life situation and goals.
Guide
Should You MIG or TIG Aluminum?
Welding aluminum presents unique challenges due to its heat conductivity and oxide layer. Learn the differences between MIG and TIG welding aluminum, when to use each process, and how to achieve st...
cutting
Which FlexCut Machine Is Right for You?
For those of us welders who’ve been around a while, the story of plasma cutting has been a curious tale. At first, consumer-grade plasma machines were finicky and expensive. Most welders trusted th...