Skip to content
Miller ArcReach Suitcase 8 w/S-Gun (951727)
Download Product Spec Sheet
The Miller ArcReach Suitcase 8 feeder allows the operator to adjust the output voltage at the feeder, saving a trip back to the power supply - no extra control cable to purchase. ArcReach equipped power sources and wire feeders work with non-ArcReach equipment, however the complete benefits are only realized with the ArcReach system.
Suitcase Features
• Electronic wire feed speed with control tachometer
• Digital meters with sunvision technology
• Front panel has trigger hold, wire jog, and gas purge
• Ability to change wire with feeder in upright position
• Dual schedule capable (dual schedule switch sold separately)
• Gun locking tab prevents gun from being pulled out prematurely
• Recessed gas inlet on rear of case
S-Gun Features
• 45° Locking, Rotatable neck
• Length: 15 ft
• Amperage Capacity: 250A
• High-Impact Glass-Reinforced Ergonomic Handle
• Quik Tip Series Consumables (e.g. T1045)
Quick Specs
• Input Power: 14-48 VDC operating range
• Wire Feed Speed: 50-780 ipm
• Duty Cycle: 60% @ 330A
• Wire Diameter Capacity: .023 - .052 Solid Wire | .030 - 5/64 Flux Cored
• Max Wire Diameter: 8" or 14lb Spool
• Dims: 15.5" H x 9" W x 21" D
• Weight: 28lbs
Includes
• ArcReach 8 feeder (8-Inch Spool Capacity)
• 15' Bernard 250A S-Gun
• Contact tips: (1) .045 | (1) .052
• .045-1/16 VK drive roll kit (no guides)
Suitcase Features
• Electronic wire feed speed with control tachometer
• Digital meters with sunvision technology
• Front panel has trigger hold, wire jog, and gas purge
• Ability to change wire with feeder in upright position
• Dual schedule capable (dual schedule switch sold separately)
• Gun locking tab prevents gun from being pulled out prematurely
• Recessed gas inlet on rear of case
S-Gun Features
• 45° Locking, Rotatable neck
• Length: 15 ft
• Amperage Capacity: 250A
• High-Impact Glass-Reinforced Ergonomic Handle
• Quik Tip Series Consumables (e.g. T1045)
Quick Specs
• Input Power: 14-48 VDC operating range
• Wire Feed Speed: 50-780 ipm
• Duty Cycle: 60% @ 330A
• Wire Diameter Capacity: .023 - .052 Solid Wire | .030 - 5/64 Flux Cored
• Max Wire Diameter: 8" or 14lb Spool
• Dims: 15.5" H x 9" W x 21" D
• Weight: 28lbs
Includes
• ArcReach 8 feeder (8-Inch Spool Capacity)
• 15' Bernard 250A S-Gun
• Contact tips: (1) .045 | (1) .052
• .045-1/16 VK drive roll kit (no guides)
| MPN: | MIL951727001 |
|---|---|
| UPC: | 715959657730 |
| Processes | Flux Cored (FCAW)MIG (GMAW) |
| Designed For | Shipbuilding Construction Heavy manufacturing Rental |
| Amperage | 330 A at 60% duty cycle |
| Input Voltage | Operates on open-circuit voltage and arc voltage: 14–48 VDC/ 110 max. OCV |
| Wire Feed Speed | 50–780 ipm (1.3–19.8 m/min.) dependent on arc voltage |
| Portability | Handle(s) |
| Weight | 28 lbs |
| Warranty | 3 Years Miller's True Blue Warranty |
Download Product Spec SheetBrands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
How to Become a Welder
There are several ways to become a welder. Each option has different pros and cons depending on your specific life situation and goals.
Guide
Should You MIG or TIG Aluminum?
Welding aluminum presents unique challenges due to its heat conductivity and oxide layer. Learn the differences between MIG and TIG welding aluminum, when to use each process, and how to achieve st...
cutting
Which FlexCut Machine Is Right for You?
For those of us welders who’ve been around a while, the story of plasma cutting has been a curious tale. At first, consumer-grade plasma machines were finicky and expensive. Most welders trusted th...