Skip to content
Thermal Arc/Tweco 200 Amp 25Ft Spool Gun For Fabricator 252I (1027-1391)
Download Product Spec Sheet
The Tweco 1027-1391 spoolgun features a twenty-five foot length and is compatible with Thermal Arc/Tweco/Esab Fabricator 252i units. The spoolgun accepts 4-inch diamter spools, so you can run 1lb spools of aluminum or 2lb spools of mild/stainless steel wire.
Features
• Direct Connect with 252i Units
• Lightweight - 6.40 lbs
• .035/.045 Drive Rolls Included
• Heavy-Duty Drive Motor
• Protective Sheath Over Power Cable and Gas Hose
• 25ft Lead
• Adjustable Drive Roll Tension
• Duty Cycle - 60% @ 200A
Includes
• SG200TA-25-3545 Spool Gun
• 11 Series Contact Tips (2) .035 | (3) .045
• 51 Series Diffusers (1 Included)
• 21 Series Nozzles (1) 21-50F Included
• Jump Liners
• Operators Manual
• Carrying Case
Features
• Direct Connect with 252i Units
• Lightweight - 6.40 lbs
• .035/.045 Drive Rolls Included
• Heavy-Duty Drive Motor
• Protective Sheath Over Power Cable and Gas Hose
• 25ft Lead
• Adjustable Drive Roll Tension
• Duty Cycle - 60% @ 200A
Includes
• SG200TA-25-3545 Spool Gun
• 11 Series Contact Tips (2) .035 | (3) .045
• 51 Series Diffusers (1 Included)
• 21 Series Nozzles (1) 21-50F Included
• Jump Liners
• Operators Manual
• Carrying Case
| MPN: | ESB10271391 |
|---|---|
| UPC: | 608246427577 |
Download Product Spec SheetBrands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
How to Become a Welder
There are several ways to become a welder. Each option has different pros and cons depending on your specific life situation and goals.
Guide
Should You MIG or TIG Aluminum?
Welding aluminum presents unique challenges due to its heat conductivity and oxide layer. Learn the differences between MIG and TIG welding aluminum, when to use each process, and how to achieve st...
cutting
Which FlexCut Machine Is Right for You?
For those of us welders who’ve been around a while, the story of plasma cutting has been a curious tale. At first, consumer-grade plasma machines were finicky and expensive. Most welders trusted th...