Skip to content
Welding Extension Cord 50' 40 Amp 250V (KWC83STBLK50)
This Welding Extension Cord 50' 40 Amp 250V (DWC83STBLK50) is perfect for powering your workshop, power tools and more! This 50 foot power extension cord has a SP35i plug and SP65O lighted receptacle. Eight gauge/ three wire (8/3) STW cable with molded ends makes this cord super durable. See pictures above for plug and receptacle configuration; we've found these to work well with 230/240/250 volt welders and plasma cutters.
We've also known these to be purchased for general use applications; construction sites, power tools, campsites (may need a whip). These extension cords are highly flexible, annealed 30 gauge bare copper conductors, insulated with an stw water-resistant jacket.
The Skinny:
Operating temperatures range from -40C to +90C (-40F to 194F).
The 8 gauge, 3 wire (8/3) conductors are rated at 250V, 40A.
NEMA 6-50 configuration.
We've also known these to be purchased for general use applications; construction sites, power tools, campsites (may need a whip). These extension cords are highly flexible, annealed 30 gauge bare copper conductors, insulated with an stw water-resistant jacket.
The Skinny:
Operating temperatures range from -40C to +90C (-40F to 194F).
The 8 gauge, 3 wire (8/3) conductors are rated at 250V, 40A.
NEMA 6-50 configuration.
| MPN: | KWC83STBLK50 |
|---|---|
| UPC: | 83STBLK50 |
MPN: KWC83STBLK50
UPC: 83STBLK50
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
Guide
How to Become a Welder
There are several ways to become a welder. Each option has different pros and cons depending on your specific life situation and goals.
Guide
Should You MIG or TIG Aluminum?
Welding aluminum presents unique challenges due to its heat conductivity and oxide layer. Learn the differences between MIG and TIG welding aluminum, when to use each process, and how to achieve st...
cutting
Which FlexCut Machine Is Right for You?
For those of us welders who’ve been around a while, the story of plasma cutting has been a curious tale. At first, consumer-grade plasma machines were finicky and expensive. Most welders trusted th...