Welding Extension Cord 25' 40 Amp 250V (KWC83STBLK25)

Welding Extension Cord 25' 40 Amp 250V (KWC83STBLK25)

$115.00 $175.00
Save $60.00

Quantity:
warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This Welding Extension Cord 25' 40 Amp 250V is perfect for MIG, TIG, Plasma Cutters and more! This 25 foot power extension cord has a SP35i plug and SP65O lighted receptacle. Eight gauge/ three wire (8/3) stw cable with molded ends makes this cord super durable. See pictures above for plug and receptacle configuration; we've found these to work well with 230/240/250 volt welders and plasma cutters. 

We've also known these to be purchased for general use applications; construction sites, power tools, camp sites (may need a whip to plug into receptacles). These extension cords are highly flexible, annealed 30 gauge bare copper conductors, insulated with an stw water-resistant jacket.

The Skinny:
Operating temperatures range from -40C to +90C (-40F to 194F).
The 8 gauge, 3 wire (8/3) conductors are rated at 250V, 40A. 
NEMA 6-50 configuration.

From The Blog

How to Become a Welder
Guide

How to Become a Welder

There are several ways to become a welder. Each option has different pros and cons depending on your specific life situation and goals.
welding MIG or TIG Aluminum
Guide

Should You MIG or TIG Aluminum?

Welding aluminum presents unique challenges due to its heat conductivity and oxide layer. Learn the differences between MIG and TIG welding aluminum, when to use each process, and how to achieve st...
welder using flexcut machine
cutting

Which FlexCut Machine Is Right for You?

For those of us welders who’ve been around a while, the story of plasma cutting has been a curious tale. At first, consumer-grade plasma machines were finicky and expensive. Most welders trusted th...