Skip to content
Welding Extension Cord 50' 40 Amp 250V (KWC83STBLK50)
This Welding Extension Cord 50' 40 Amp 250V (DWC83STBLK50) is perfect for powering your workshop, power tools and more! This 50 foot power extension cord has a SP35i plug and SP65O lighted receptacle. Eight gauge/ three wire (8/3) STW cable with molded ends makes this cord super durable. See pictures above for plug and receptacle configuration; we've found these to work well with 230/240/250 volt welders and plasma cutters.
We've also known these to be purchased for general use applications; construction sites, power tools, campsites (may need a whip). These extension cords are highly flexible, annealed 30 gauge bare copper conductors, insulated with an stw water-resistant jacket.
The Skinny:
Operating temperatures range from -40C to +90C (-40F to 194F).
The 8 gauge, 3 wire (8/3) conductors are rated at 250V, 40A.
NEMA 6-50 configuration.
We've also known these to be purchased for general use applications; construction sites, power tools, campsites (may need a whip). These extension cords are highly flexible, annealed 30 gauge bare copper conductors, insulated with an stw water-resistant jacket.
The Skinny:
Operating temperatures range from -40C to +90C (-40F to 194F).
The 8 gauge, 3 wire (8/3) conductors are rated at 250V, 40A.
NEMA 6-50 configuration.
| MPN: | KWC83STBLK50 |
|---|---|
| UPC: | 83STBLK50 |
MPN: KWC83STBLK50
UPC: 83STBLK50
Brands you trust at prices you can afford!
Over the past decade, we've become the country's most trusted one-stop online welding shop. We've done it with the guaranteed lowest prices, the best customer service in the industry, and a commitment to providing the best online shopping experience for all welders.
------------------------------
From The Blog
MIG
Lincoln’s NEW Power MIG 220: the Ultimate All-in-One Machine
For TIG welders, most multiprocess machines have always had a critical flaw: They cannot TIG weld aluminum. When working with that type of material, AC TIG must be used in almost all cases. But for...
TIG
Syncrowave 212: Is It a Worthy Successor to Miller’s Beloved TIG welder?
TIG welding is like patting your head while rubbing your belly, while also doing a Rubik's cube with your feet and whistling Yankee Doodle. Simply put, you’ve got a lot going on while TIG welding (...
Helmets
Is the Miller T94i-R PAPR System Worth It?
Let’s drop a hard truth: In the welding world, an experienced welder is worth more than 20 beginner welders. This is often directly reflected in the pay for welders. Some highly skilled welders can...